Nitrogen oxides (NO_X) in the atmosphere cause oxidation reactions with photochemical radicals and volatile organic compounds, leading to the accumulation of ozone (O₃). NO_X constitutes a significant portion of the NO_y composition, with nitrous acid (HONO) and nitric acid (HNO₃) following. HONO plays a crucial role in the reaction cycle of NO_X and hydrogen oxides. The majority of HNO₃ reduction mechanisms result from aerosolization through heterogeneous reactions, having adverse effects on humans and plants by increasing secondary aerosol concentrations in the atmosphere. The investigation of the formation and conversion mechanisms of HONO and HNO₃ is important; however, research in this area is currently lacking. In this study, we observed HONO, HNO₃, and their precursor gases were observed in the atmosphere using parallel-plate diffusion scrubber-ion chromatography. A 0-D box model simulated the compositional distribution of NO_y in the atmosphere. The formation reactions and conversion mechanisms of HONO and HNO₃ were quantified using reaction equations and reaction coefficients. Among the various mechanisms, dominant mechanisms were identified, suggesting their importance. According to the calculation results, the produce of HONO was predominantly attributed to heterogeneous reactions, excluding an unknown source. The sink processes were mainly governed by photolysis during daytime and reactions with OH radicals during nighttime. HNO₃ showed dominance in its production from N₂O₅, and in its conversion mechanisms primarily involving aerosolization and deposition.

Volatile organic compounds (VOCs) are one of significant contributors to air pollution and have profound effects on human health and the environment. This study introduces a detailed analysis of VOC emissions from various industries within an industrial complex using a high-resolution measurement instrument. This study aimed to identify the VOC profiles and their concentrations across 12 industries. Sampling was conducted across 99 facilities in an industrial complex in South Korea, and VOC analysis was performed based on measurement data using a Proton-Transfer-Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS). The results indicated that the emission of oxygenated VOCs (OVOCs) was dominant in most industries. Aromatic hydrocarbons were also dominant in most industries, except in screen printing (SP), lubricating oil and grease manufacturing (LOG), and industrial laundry services (ILS) industries. Chlorinated VOCs (Cl-VOCs) showed a relatively higher level in the metal plating (MP) industry than those in other industries and nitrogen-containing VOCs (N-VOCs) showed high levels in general paints and similar product manufacturing (PNT), MP, and ILS industries, respectively. The gravure printing industry was identified as the highest emitter of VOCs, with the highest daily emissions reaching 5934 mg day⁻¹, primarily consisting of ethyl acetate, toluene, butyl acetate, and propene. The findings suggest that the VOC emissions from the gravure printing and plastic synthetic leather industries should be primarily reduced, and it would be the most cost-effective approach to improving air quality. This study can provide the fundamental data for developing effective reduction technologies and policies of VOC, ultimately contributing to enhanced atmospheric models and regulatory measures.

Odor is usually a complex mixture of various compounds. In many countries, odor complaints have been addressed using the air dilution olfactory method (ADOM) to reduce their malodor complaint. In this study, continuous monitoring of ammonia, hydrogen sulfide, and total volatile organic compounds (TVOC) using sensors was conducted in facilities for municipal and livestock wastewater treatment (LWT), and for food waste composting (FWC). Odor intensity was modelled by multivariate linear regression using sensor monitoring data with air dilution measured by the ADOM. In testing the performance of sensors in the lab, all three sensors showed acceptable values for linearity, accuracy, repeatability, lowest detection limit, and response time, so the sensors were acceptable for application in the field. In on-site real-time monitoring, the three sensors functioned well in the three environmental facilities during the testing period. Average ammonia and hydrogen sulfide concentrations were high in the LWT facility, while TVOC showed the highest concentration in the FWC facility. A longer sampling time is necessary for ammonia monitoring. Odor intensity from individual sensor data correlated well to complex odor measured by the ADOM. Finally, we suggest a protocol for field application of sensor monitoring and odor data reproduction.

To establish and implement effective policies for controlling fine particle matters (PM_2.5), which is associated with high-risk diseases, continuous research on identifying PM_2.5 sources was conducted. This study utilized the positive matrix factorization (PMF) receptor model to estimate the sources and characteristics of PM_2.5 between Baengnyeong Island (BNI) and the Seoul Metropolitan Area (SMA). We conducted PMF modeling and backward trajectory analysis using the data on PM_2.5 and its components collected from 2020 to 2021 at the Air quality Research Centers (ARC). The PMF modeling identified nine pollution sources in both BNI and the SMA, including secondary sulfate, secondary nitrate, vehicles, biomass burning, dust, industry, sea salt particles, coal combustion, and oil combustion. Secondary particulate matter, vehicles, and biomass burning were found to be major contributors to PM_2.5 concentrations in both regions. A backward trajectory analysis indicated that air masses, passing through BNI to the SMA, showed higher concentrations and contributions of ammonium nitrate, vehicles, and biomass burning in the SMA site compared to BNI site. These findings suggest that controlling nitrogen oxides (NOx) and ammonia emissions in the SMA, as well as monitoring the intermediate products that form aerosols, such as HNO₃, are needed.