To satisfy the requirements of modern communication systems and wearables using 2.4/5.8 GHz band this paper presents a simple, compact, and dual-band solution. The antenna is extracted from a circular monopole by inserting various patches and stubs. The genetic algorithm is utilized to optimize the parameters and achieve the best possible results regarding bandwidth and gain. Afterward, a 2-port multiple-input-multiple-output (MIMO) configuration is created by positioning an identical second single element perpendicularly to the first one. The electrical size of the suggested MIMO configuration is 0.26 λ_L × 0.53 λ_L, where λ_L represents the free space wavelength at lower resonance of 2.45 GHz. The common ground technique is adopted to further reduce and achieve the accepted level of mutual coupling of the MIMO configuration. The presented MIMO antenna offers a low mutual coupling of < –27 dB with 0.2 envelope correlation coefficient (ECC). The antenna has a gain of around 6.2 dBi and 6.5 dBi at resonating frequencies of 2.45 GHz and 5.4 GHz. Furthermore, the specific absorption rate (SAR) analysis of the MIMO antenna offers a range inside of the standard values, showing its potential for On/Off body communications. The comparison with already published works shows that the proposed antenna achieves better results in either compact size or wide operational bandwidth along with low mutual coupling.

This paper introduces a compact Multiple Input Multiple Output (MIMO) Ultrawideband (UWB) antenna seamlessly integrated with the Ku band, tailored for wireless communication applications. The MIMO antenna employs octagonal radiators, crafted from a tapered microstrip line-fed rectangular patch, etched on an economically efficient FR4 substrate measuring 40 × 23 mm². The octagonal configuration is achieved by introducing a rectangular patch to the central radiator, while parasitic stubs are strategically employed to mitigate coupling among MIMO elements. The antenna demonstrates an extensive operational bandwidth spanning 3.28–17.8 GHz, covering UWB, extended UWB, and Ku-band spectrums globally allocated for heterogeneous applications. With a peak gain of 4.93 dBi and an efficiency of 95.34%, the proposed MIMO antenna showcases superior performance. Key performance parameters, including a low envelope correlation coefficient (ECC) of 0.003 and a substantial diversity gain (DG) of 9.997 dB, are thoroughly analyzed. Comparative assessments against recent works validate the novelty and potential of the proposed antenna for integration into compact wireless systems. This study underscores the success of the antenna design in achieving a harmonious balance of compactness, wide operational bandwidth, and high performance, positioning it as a promising candidate for diverse wireless communication applications.

In this article, we propose the design of a rectangular-shaped patch antenna suitable for ultra-wideband (UWB) applications and short and long–range Millimeter-Wave Communications. We begin with the design of a high-gain UWB rectangular patch antenna featuring a partial ground plane and operating within the 3.1–10.6 GHz bandwidth. Complementary Split Ring Resonators (CSRRs) are integrated on both sides of the structure to meet desired specifications. The resulting UWB antenna boasts an extended frequency bandwidth, covering 2.38–22.5 GHz (twice that of the original antenna), with a peak gain of 6.5 dBi and an 88% radiation efficiency. The grey wolf optimization technique (GWO) determines optimal structural dimensions. Validation of the antenna's performance is demonstrated through the strong agreement between measurement and simulation.

The research paper discusses the detailed designing of a compact, simple, and low-profile antenna that provides several desirable features. The antenna is engineered by using a substrate material called Roger 6002, and its dimensions are 12 mm × 6 mm × 1.52 mm. The single antenna element achieves a wideband frequency coverage of 24–30.2 GHz and a high gain of 9 dBi. To enhance the antenna's capabilities, a two-port multiple-input multiple-output (MIMO) configuration is employed by adding a second antenna element orthogonal to the first one. Although the operational band remains the same, the isolation between the two elements is found to be unsatisfactory. A C-shaped decoupling structure is established to address this issue, which effectively improves the isolation. Including the parasitic patch enhances the isolation from −18 dB to −29 dB. An antenna hardware sample is built and tested to validate the recommended work, and the outcomes are compared to the predicted results obtained from the software. The experimental and simulated data exhibit close agreement, confirming the accuracy of the design. Additionally, this outstanding performance in bandwidth and isolation compares with existing literature, presented in the form of a table. Various MIMO parameters are also examined, and it is found that they fall within acceptable ranges. The antenna demonstrates an Envelope Correlation Coefficient (ECC) of approximately 0.005 and a Diversity Gain (DG) of around 9.99 dB. The recommended antenna design is highly suitable for future miniature devices used in Internet of Things (IoT) applications.

This article presents an antenna with compact and simple geometry and a low profile. Roger RT6002, with a 10 mm × 10 mm dimension, is utilized to engineer this work, offering a wideband and high gain. The antenna structure contains a patch of circular-shaped stubs and a circular stub and slot. These insertions are performed to improve the impedance bandwidth of the antenna. The antenna is investigated, and the results are analyzed in the commercially accessible electromagnetic (EM) software tool High Frequency Structure Simulator (HFSS). Afterwards, a two-port multiple–input–multiple–output (MIMO) antenna is engineered by orthogonalizing the second element to the first element. The antenna offers good value for mutual coupling of less than −20 dB. The decoupling structure or parasitic patch is placed between two MIMO elements for more refined mutual coupling of the proposed MIMO antenna. The resultant antenna offers mutual coupling of less than −32 dB. Moreover, other MIMO parameters like envelop correlation coefficient (ECC), mean effective gain (MEG), diversity gain (DG), and channel capacity loss (CCL) are also studied to recommend antennas for future applications. The hardware model is fabricated and tested to validate the results, which resembles software-generated results. Moreover, the comparison of outcomes and other important parameters is performed using published work. The outcome of this proposed work is performed using already published work. The outcomes and comparison make the presented design the best option for future 5G devices.