An inductor-aid step-up LLC wireless power transfer (WPT) system is proposed in this paper. It could step up the WPT output voltage beyond the conventional LLC series-series (SS) compensation method. Employing a parallel inductor with the transmitter coil to lessen the circuit impedance thus the inverter exhibits a new gain curve. The constant frequency operation and simple control of two series active switches in the parallel inductor branch shows a practical improvement of conventional constant frequency LLC WPT system, in terms of voltage demand, new standards and applications. Even the frequency modulation LLC WPT system could be benefited from this enhanced topology rather than to deteriorate the inverter current stress and unnecessary over-rating of magnetic components. The receiver side compensation tank has no additional voltage drop and overcurrent. A 300W prototype has been constructed to validate the concept and performed at 90% efficiency.
An antilock braking system (ABS) is one of the most important components in a road vehicle, which provides active protection during braking, to prevent the wheels from locking-up and achieve handling stability and steerability. The all-electric ABS without any hydraulic components is a potential candidate for electric vehicles. To demonstrate and examine the all-electric ABS algorithms, this article proposes a single-wheel all-electric ABS test bench, which mainly includes the vehicle wheel, the roller, the flywheels, and the electromechanical brake. To simulate dynamic operation of a real vehicle’s wheel, the kinetic energy of the total rotary components in the bench is designed to match the quarter of the one of a commercial car. The vertical force to the wheel is adjustable. The tire-roller contact simulates the real tire-road contact. The roller’s circumferential velocity represents the longitudinal vehicle velocity. The design and analysis of the proposed bench are described in detail. For the developed prototype, the rated clamping force of the electromechanical brake is 11 kN, the maximum vertical force to the wheel reaches 300 kg, and the maximum roller (vehicle) velocity reaches 100 km/h. The measurable bandwidth of the wheel speed is 4 Hz–2 kHz and the motor speed is 2.5 Hz–50 kHz. The measured results including the roller (vehicle) velocity, the wheel velocity, and the wheel slip are satisfactory. This article offers the effective tools to verify all-electric ABS algorithms in a laboratory, hence saving time and cost for the subsequent test on a real road.
A magnetohydrodynamic (MHD) thruster is the next-generation electric jet engine for maritime applications. It eliminates the moving mechanical components that make the noises and reduces physical harm to sea creatures. This paper finds that aluminum electrodes have higher conductivity and less capacitive value in a KCl solution than the 316 stainless steel and zinc in MHD applications. Further, the AC operation can mitigate the power loss during electrolysis and power loss while on the water. The new optimal coil design with the enclosed-type ferrite layout of the MHD thruster is addressed by this simulation study. The AC operation and electric drive with a Lorentz force analysis will be demonstrated. Lastly, a verification experiment that pushes the KCl solution at 3 cm/s will be interpreted by the prototype to display the electric operation detail.
20 August 2024 in IEEE Transactions on Transportation Electrification
A magnetohydrodynamic (MHD) engine is a propulsion system that converts electric energy into fluid flow by utilizing the Lorentz force. It has the potential to electrify the conventional rotational propellers on ships, which can have adverse effects on the underwater environment. However, the development of an MHD engine for maritime propulsion is sparse, from the motion theory to the prototype investigation. In this paper, the advantage of high-frequency AC operation is depicted. The systematic introduction for the AC MHD engine is elucidated for the electromagnetic field generator configurations, engine drive topologies and the onboard compartment distributions. The propulsion mechanism will be interpreted in force analysis, regarding the Lorentz force and its interaction with the fluid by applying the Stokes law, by deriving the forces to a single ion to the liquid dragged by the engine. Moreover, it provides a case study of the practical development for the engine, showing the power circuit with the forward/reverse control, the analysis of the reluctance circuit and magnetic simulation for the magnetic field estimation, and the laboratory testing solution for mock seawater. A 250W experiment combining the electric and fluid measurements was conducted to benchmark the AC operational MHD engine structure, validating the proposed topology with practical control and presenting 80% accuracy of the propulsion mechanism analysis.
19 December 2023 in IEEE Transactions on Energy Conversion
The Magnetohydrodynamic (MHD) thruster is an electrical propulsion system that utilizes Lorentz force to convert the electric power to mechanical, accelerating the conductive fluid without the need for conventional moving propellers. However, most propulsion analyses of MHD thrusters are based on fluid dynamics, which is not of the electrical engineering discipline. This article proposes a novel modeling approach that combines Lorentz force with Stokes law in fluid mechanics to figure out the operation mechanism of the MHD thruster. The study investigates the propulsion force towards charged particles in a vacuum and conductive solutions under DC and AC, displaying the resulting moving profiles. Furthermore, this article presents a 550 mm long MHD thruster prototype design that includes the testing liquid solution, electromagnetic field generation, and the power electronic circuit for the electric thruster propulsion, to provide convincing validation of the proposed modeling.
6 August 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The new frontier maritime magnetohydrodynamic (MHD) engine drive generates the fields of magnetic and electric to accelerate seawater inside the engine duct. The DC system is overwhelmed by the AC for no explosive and poison gases emission. The proposed power circuit applies a transformer to provide a new drive design for the AC system, by reallocating the field generation currents for propulsion. The excitation current for magnetic field generation now is higher in the primary side of transformer and thus to decrease the current flowing the liquid which drew plenty of the conduction loss in previous AC MHD drive in series-resonant design. To conduct the high-frequency AC to mitigate the gas emission and the phase-difference between the fields, three resonant tanks are deployed, constructing a resonant circuit for high circuitry efficiency operation. This paper starts from introducing the concept of maritime MHD engine and the research fundamental. The comparison to the conventional AC MHD engine drive stresses its advantage. Steady-state analysis elaborates the proposed topology and design consideration highlights the optimal design to the turn ratio and engine duct design. The electrical-fluid experiment and the concept verified converter will be demonstrated with the 82% converter efficiency at 470W, maximum 92% efficiency to back the validity.