Morphing aircraft are able to keep optimal performance in diverse flight conditions. However, the change in geometry always leads to challenges in the design of flight controllers. In this paper, a new method for designing a flight controller for variable-sweep morphing aircraft is presented—dynamic inversion combined with adaptive control. Firstly, the dynamics of the vehicle is analyzed and a six degrees of freedom (6DOF) nonlinear dynamics model based on multibody dynamics theory is established. Secondly, nonlinear dynamic inversion (NDI) and incremental nonlinear dynamic inversion (INDI) are then employed to realize decoupling control. Thirdly, linear quadratic regulator (LQR) technique and adaptive control are adopted to design the adaptive controller in order to improve robustness to uncertainties and ensure the control accuracy. Finally, extensive simulation experiments are performed, wherein the demonstrated results indicate that the proposed method overcomes the drawbacks of conventional methods and realizes an improvement in control performance.
In the past few decades, in-flight icing has become a common problem for many missions, potentially leading to a reduction in control effectiveness and flight stability, which would threaten flight safety. One of the most popular methods to address this problem is adaptive control. This paper establishes a dynamic model of an iced high-altitude long-endurance unmanned aerial vehicle (HALE-UAV) with disturbance and measurement noise. Then, by combining multilayer perceptrons (MLP) with a nonlinear dynamic inversion (NDI) controller, we propose an MLP-NDI controller to compensate for online inversion errors and provide a brief proof of control stability. Two experiments were conducted: on one hand, we compared the MLP-NDI controller with other typical controllers; on the other hand, we evaluated its robustness and adaptiveness under different icing conditions. Results indicate that the MLP-NDI controller outperforms other typical controllers with higher tracking accuracy and exhibits strong robustness in the presence of icing errors and measurement noise, which has huge potential to ensure flight safety.