Our two major concerns, which should be taken into consideration as soon as we start the selecting the machining parameters, are the minimization of the machining time and the maintaining of the high-speed machining machine in good state. The manufacturing strategy is one of the parameters which practically influences the time of the different geometrical forms manufacturing, as well as the machine itself. In this article, we propose an optimization methodology of the machining strategy for pockets of complex forms. For doing this, we have developed analytic models expressing the feed rate of the cutting tools trajectory. Then, we have elaborated an optimization method based on the analysis of the different critical parameters so as to distinguish the most suitable strategies to calculate the cutting time and define the machine dynamics. To validate our results, we have compared them to the experimental ones and also to those found in literature.

In this study, we analyzed the effects of vibration assistance, combined with a ball burnishing process, in terms of topology, residual stresses, and tribological properties on 316L shafts. The burnishing variables consisted of the variation of the input force, the number of passes, and the activation of the vibration assistance, which is based on a 40 kHz frequency and 8 μm of vibration amplitude, derived in a screening design of three factors. The results show that the medium–high level of burnishing force, high level of the number of passes, and the activation of the vibration assistance are the best options in order to improve the average roughness, the microstructure, the increase in the compressive residual stresses, and the wear enhancement, besides all variables being significant in the p-value analysis through ANOVA. Statistically, the vibration-assisted ball burnishing improved the average roughness by 2.9%, enlarged the von Mises stress on the surface by 11.5% and enhanced the wear resistance of a 316L shaft and WC-Co ball contact up to 7.3%.

The objective of the research is to analyze the impact of the ultrasonic vibration assistance on the wear resistance due to the topography enhancement caused on Ti6Al4V cylindrical samples after surface modification through a ball burnishing process. The process parameters considered for this study are the burnishing force, the number of passes, and the addition of a 40 kHz ultrasonic assistance, which are thought to enhance the surface topography and increase the hardener effect in terms of depth. A complete screening design of 3 factors was performed, revealing that the number of passes and the vibration assistance are the most important parameters for minimizing the wear volume loss, being 170 N of burnishing force, 3 passes, and the addition of the vibration assistance as the best combination found. However, no significant difference in the friction force was observed. The topography results show that there is a decrease in the average roughness from 1.50 to 0.45 μm with optimal burnishing conditions. It was also analyzed the microstructure originated after the turning, the conventional ball burnishing, and the vibration-assisted ball burnishing, being the last optimal in terms of depth affectation to the microstructure. Therefore, these results confirm an improvement in terms of wear enhancement, friction reduction, and topography results when vibration assistance is added to a conventional ball burnishing process.

This paper focuses on a resonant system used to induce a low-amplitude movement and ultrasonic frequency to complement a ball burnishing process on a lathe. The system was characterized through the combination of different techniques. A full vibratory characterization of this process was undertaken with the purpose of demonstrating that the mechanical system—composed of the tool and the machine—does not present resonance phenomena during the execution of the operation that could lead to eventual failure. This dynamic analysis validates the adequateness of the tool when attached to an NC lathe, which is important to guarantee its future implementation in actual manufacturing contexts. A further aim was to confirm that the system succeeds in transmitting an oscillating signal throughout the material lattice. To this end, different static and dynamic techniques that measure different vibration ranges—including impact tests, acoustic emission measurement, and vibration measurement—were combined. An operational deflection shape model was also constructed. Results demonstrate that the only high frequency appearing in the process originated in the tool. The process was not affected by the presence of vibration assistance, nor by the burnishing preload or feed levels. Furthermore, the frequency of the assisting ultrasonic vibration was characterized and no signal due to possible damage in the material of the specimens was detected. These results demonstrate the suitability of the new tool in the vibration-assisted ball burnishing process.

This paper aims to present a study of the effects of ball burnishing with vibration assistance on the bending fatigue endurance of cylindrical specimens subjected to bending stress and obtain the best input parameters. The specimens were burnished through six different combinations of preload force, number of passes, and vibration assistance, finding that burnishing while applying a 90‐N preload, five passes, and the addition of vibration assistance results in larger fatigue strength. In terms of roughness, it has been proved that vibration‐assisted ball burnishing reduces the mean roughness up to 90%, while enhancing the skewness and kurtosis parameters. The softening effect while deforming, caused by the vibration assistance, helped to reconstruct the surface, obtaining higher depths of affectation and hardening. Fatigue strength was improved by a 6.54% by only adding vibration assistance to the ball‐burnishing process.

42CrMo steel is widely utilized in the manufacturing of high-speed, heavy-duty components due to its excellent wear resistance and hardness. To further enhance its performance and extend its service life, ultrasonic rolling strengthening technology has been employed. However, the underlying microscopic strengthening mechanisms induced by ultrasonic deformation require comprehensive investigation. This study aims to analyze the microscopic strengthening mechanisms of unquenched 42CrMo steel through theoretical modeling, processing experiments, and electron backscatter diffraction (EBSD) microstructure characterization. The research focuses on key aspects such as contact mechanics, residual stress distribution, grain boundaries, orientation evolution, and microtexture development under ultrasonic rolling. Experimental results demonstrate that ultrasonic rolling induces severe plastic deformation on the material’s surface, generating significant residual compressive stress within the workpiece. On a microstructural level, ultrasonic rolling increases grain density, refines grain size, and significantly enhances dislocation density. In addition, the formation of fiber texture and a {110} texture was observed, driven by multi-energy field coupling and the natural rotation of slip planes. Importantly, the high-angle random grain boundaries in the unquenched 42CrMo steel matrix were transformed into low-angle boundaries due to the combined effects of high-frequency vibrations and static pressure, which promoted dislocation slip and redistributed grain orientations. These findings provide an in-depth understanding of the microscopic strengthening mechanisms of ultrasonic rolling, highlighting its potential to achieve precise microstructural control and improve the mechanical performance of 42CrMo steel.