Recovering valuable metals from spent lithium-ion batteries (LIBs), a kind of solid waste with high pollution and high-value potential, is very important. In recent years, the extraction of valuable metals from the cathodes of spent LIBs and cathode regeneration technology are still rapidly developing (such as flash Joule heating technology to regenerate cathodes). This review summarized the studies published in the recent ten years to catch the rapid pace of development in this field. The development, structure, and working principle of LIBs were firstly introduced. Subsequently, the recent developments in mechanisms and processes of pyrometallurgy and hydrometallurgy for extracting valuable metals and cathode regeneration were summarized. The commonly used processes, products, and efficiencies for the recycling of nickel–cobalt–manganese cathodes (NCM/LCO/LMO/NCA) and lithium iron phosphate (LFP) cathodes were analyzed and compared. Compared with pyrometallurgy and hydrometallurgy, the regeneration method was a method with a higher resource utilization rate, which has more industrial application prospects. Finally, this paper pointed out the shortcomings of the current research and put forward some suggestions for the recovery and reuse of spent lithium-ion battery cathodes in the future.

Kaolinite can be used as in-furnace adsorbent to capture gaseous semi-volatile metals during combustion, incineration, or gasification processes for the purposes of toxic metals emission control, ash deposition/slagging/corrosion inhibition, ultrafine particulate matter emission control, and so on. In this work, the adsorptions of typical heavy metals (Pb and Cd) and typical alkali metals (Na and K) by meta-kaolinite were investigated by the DFT calculation. The adsorption energies followed the sequence of NaOH-Si surface > KOH-Si surface > PbO-Al surface ≈ CdO-Al surface ≈ NaOH-Al surface > KOH-Al surface > NaCl-Al surface ≈ Na-Si surface > Na-Al surface > KCl-Al surface > Pb-Al surface > PbCl₂-Al surface > CdCl₂-Al surface ≈ K-Si surface ≈ PbCl-Al surface > K-Al surface > CdCl-Al surface > NaCl-Si surface > KCl-Si surface > Cd-Al surface. Si surface was found available to the adsorptions of Na, K, and their compounds, although it was invalid to the adsorptions of Pb, Cd, and their compounds. The interactions between adsorbates and surfaces were revealed. Furthermore, the discussion of combining with the experimental data was applied to the subject validity of calculation results and the effect of chlorine on adsorption and the effect of reducing atmosphere on adsorption.

The construction industry plays a crucial role in achieving global carbon neutrality. The purpose of this study is to explore the application of photovoltaic curtain walls in building models and analyze their impact on carbon emissions in order to find the best adaptation method that combines economy and carbon reduction. Through a carbon emissions calculation and economic analysis of replacing photovoltaic curtain walls on a large public building in Zhenjiang, China, the results showed that after replacing glass curtain walls with photovoltaic curtain walls, the carbon emissions during the construction operation stage decreased by 30.74%, but the carbon emissions during the production and transportation stage of building materials increased by 10.48%. The carbon emissions throughout the entire life cycle of the building have been reduced by 20.99%. This indicates that photovoltaic curtain wall technology has the potential to reduce building carbon emissions. Further promoting the development of production technology and sales routes for photovoltaic curtain walls and accelerating the improvement of carbon trading systems can further improve the carbon emission reduction effect of buildings. This study provides practical reference for public buildings in similar areas and guidance for reducing carbon emissions in the future.