As off-road vehicles, in addition to field transportation, another vital function of agricultural tractors is to provide power for field machinery. Therefore, the dynamic performance of the power take-off (PTO) driveline directly affects the field reliability of tractors. Firstly, a torsional vibration coupled spatial dynamics model of the power take-off driveline is proposed according to the classical machine driveline dynamics and gear dynamics theory. In the dynamics model, the interactions among the vertical, lateral, and rotational motions of the driveline parts are fully included. The coupling vibrations from internal excitations (such as tooth surface friction, gear time-varying mesh, and engine pulse) and external excitations (such as field machinery load) are also considered. Secondly, the simulation results of the model are obtained using the numerical solving algorithm ode15s. The actual experiment is carried out on the indoor Tractor PTO Test Bench. Then, the model is verified by comparing the test results with the simulation results. Finally, the dynamic characteristics of the whole driveline are revealed under different drive modes, especially strong interactions between the driveline and field machinery in low-speed and heavy-load mode. The gear mesh forces and the root mean square (RMS) values of the acceleration amplitude for the main parts generally decrease gradually with the increase in the PTO rotation speed and the decrease in PTO torque. Furthermore, the model can be applied to reliability assessment, for instance, vibration, damage, and fatigue of off-road vehicles considering gear transmissions, particularly in a field working environment.
Aiming at the serious problem of agricultural tractor emission pollution, especially the limitation of nitrogen dioxide (NOx) and soot emissions, we took an agricultural diesel engine as the research object, and a diesel engine combustion chamber model was established for both simulated calculations and experimental verification analysis. The in-cylinder pressure and heat release obtained from the combustion chamber model simulation calculations were within 6% error of the experimental data. The overall trend of change was basically consistent. The established model can simulate the working conditions of the experimental engine relatively well. An artificial neural network (ANN) was also established as an agent model based on the indentation rate, tab depth, and combustion chamber depth as the input, and NOx and soot as the output. The decision coefficients of the ANN model were R2 = 0.95 and 0.93, with corresponding Mean Relative Error (MRE) values of 10.13 and 8.18%, respectively, which are within the generally required interval, indicating that the obtained ANN model has good adaptability and accuracy. On the basis of the general particle swarm optimization (PSO) algorithm, an improved PSO algorithm was proposed, in which the inertia factor is continuously adjusted with the help of the skip line function in the optimization process so that the inertia factor adapts to different rates and adjusts the magnitude of the corresponding values in different periods. The improved PSO algorithm was used to optimize the optimal input parameter matching of the agent model to form a new combustion chamber structure, which was imported into CONVERGE CFD software for emission simulation and comparison with the emissions of the original combustion chamber. It was found that the NOx reduction was about 1.21 g·(kW·h)−1, and the soot reduction was about 0.06 g·(kW·h)−1 with the new combustion chamber structure. The ANN + PSO optimization method proved to be effective in reducing the NOx and soot emissions of diesel engine pollutants, and it may also provide a reference and ideas for the design and development of relevant agricultural engine combustion chamber systems.