The use of titanium alloys in the aeronautical and high technology domains is widespread. The high strength and the low mass are two outstanding characteristics of titanium alloys which permit to produce parts for these domains. As other hard materials, it is challenging to generate 3D surfaces (e.g. pockets) when using conventional cutting methods. The development of Abrasive Water Jet Machining (AWJM) technology shows the capability to cut any kind of materials and it seems to be a good solution for such titanium materials with low specific force, low deformation of parts and low thermal shocks. Applying this technology for generating 3D surfaces requires to adopt a modelling approach. However, a general methodology results in complex models due to a lot of parameters of the machining process and based on numerous experiments. This study introduces an extended geometry model of an elementary pass when changing the firing angle during machining Ti-6AL-4V titanium alloy with a given machine configuration. Several experiments are conducted to observe the influence of major kinematic operating parameters, i.e. jet inclination angle (α) (perpendicular to the feed direction) and traverse speed (Vf). The material exposure time and the erosion capability of abrasives particles are affected directly by a variation of the traverse speed (Vf) and firing angle (α). These variations lead to different erosion rates along the kerf profile characterized by the depth and width of cut. A comparison demonstrated an efficiency of the proposed model for depth and width of elementary passes. Based on knowledge of the influence of both firing angle and traverse speed on the elementary pass shape, the proposed model allows to develop the simulation of AWJM process and paves a way for milling flat bottom pockets and 3D complex shapes.
Additive Manufacturing (AM) of the Ti–6Al–4V alloy has gained significant importance across various industries, including biomedical, aerospace, cellular, and land vehicle applications, due to its numerous benefits. The certification of performance and reliability of AM materials, particularly for critical applications, heavily relies on evaluating fatigue strength. In this study, a numerical analysis based on the finite element method is presented to predict the High Cycle Fatigue (HCF) behavior of AM Ti–6Al–4V alloy. The investigation focuses on exploring the sensitivity of material fatigue life to surface roughness and Ultimate Tensile Strength (UTS). Uniaxial tensile and High Cycle Fatigue (HCF) tests were conducted on Ti–6Al–4V alloy samples extracted from rectangular walls manufactured using the Laser Metal Deposition (LMD) process. The walls were surface machined prior to sample extraction. Porosity and surface roughness measurements were performed on the samples. Numerical simulations of the HCF tests were carried out, considering various surface roughness ranges and UTS values. The numerical results were then compared to experimental data. The findings consistently demonstrated that higher surface roughness led to a shorter fatigue life, while higher UTS values resulted in a longer fatigue life. The numerical solutions aligned with the experimental results, indicating the efficacy of the finite element method in predicting the fatigue behavior of AM Ti–6Al–4V alloy. These insights contribute to a better understanding of the relationship between surface roughness, UTS, and fatigue life of Ti–6Al–4V alloys manufactured by AM.
1 June 2014 in The International Journal of Advanced Manufacturing Technology