Hydroxyapatite (HA or HAp) is one of the most preferred biomaterials, specifically for bone tissue engineering. HAp is available naturally and is also chemically synthesized. The properties, shape, size and crystalline structure and applications of HAp vary widely depending on the source and extraction methods used. In addition to conventional chemical approaches such as precipitation or sol-gel techniques, newer methods such as microwave synthesis and atomic-layer deposition provide an opportunity to generate HAp with desirable structure and properties. Various methods used for the synthesis of HAp have their own pros and cons. Hence, it is essential to understand the role of specific methods and conditions on the properties and structure of HAps in order to obtain HAp with properties suitable for specific applications. In addition to pure HAp, substantial efforts have been made to dope HAp with various minerals or bioentities to enhance their suitability for medical, environmental remediation and other approaches. In this review, we provide an overview of the various chemical methods used to produce HAp, properties of the HAp produced and its potential applications. Particular focus of this paper is on the co-relation between properties and processes used to synthesis HAp. This review will enable readers to quickly understand the importance of synthesis methods and conditions on the properties of HAp and choose appropriate means to generate HAp with desired properties for specific applications. Graphical Abstract
1 February 2022 in Russian Journal of Inorganic Chemistry
Apatite calcium phosphates have been synthesized at pH 9–11, Ca/P = 1.50–1.67 under variable isolation conditions. A complex procedure for identification of inclusion of amorphous calcium phosphate by precipitation of hydroxyapatite under non-equilibrium conditions, including XRD/FTIR/DTA methods. The maximal stabilization of amorphous phase inclusions in hydroxyapatite structure proceeds at precipitation pH 9, fast reaction of the chemicals without precipitate maturation stage under mother solution and careful dehydration by ethanol followed by heating at 400°C. Contradictions in reported physicochemical properties apatite calcium phosphates are related to formation of amorphous inclusions. A scheme of formation and thermal transformations of apatitic calcium phosphates under different equilibrium and formation conditions has been suggested for monophase stoichiometric hydroxyapatite, biphasic composites based on calcium-deficient hydroxyapatites, and amorphous calcium phosphate
1 March 2007 in Russian Journal of General Chemistry
Mesoporous calcium phosphate granules ranging in mesopore size from 11 to 19 nm have been prepared using cryogenic processing (–18°C) of gels and extrusion of calcium phosphate paste. The granules...
We have examined the effect of synthesis and heat-treatment conditions on the phase composition of composites based on hydroxyapatite and zirconia. The zirconia present in the composite based on a mechanical powder mixture crystallizes predominantly in tetragonal symmetry at heat-treatment temperatures in the range 400–600°C and in monoclinic symmetry at 800°C. The zirconia present in the composites prepared via the mixing of hydroxyapatite gel with hydrated zirconia sol or coprecipitation crystallizes only in monoclinic symmetry. Annealing at 1300°C leads to the formation of a solid solution with the composition Ca0.15Zr0.85O1.85 in all of the composites as a consequence of complete or partial hydroxyapatite decomposition and the thermal diffusion of Ca2+ ions into the ZrO2 lattice. In the composites prepared by liquid-phase processes, heat treatment in the range 800–1300°C produces the smallest changes in the hydroxyapatite structure, which ensures high biological activity of the material.