Three-dimensional bioprinting offers a novel strategy to create large-scale complex tissue models. Nowadays, layer by layer fabrication is used to create patient specific tissue substitutes. However, commercially available bioprinters cannot be widely used especially in small research facilities due to their high cost, and may not be suitable for bioprinting of complex tissue models. Besides, most of the systems are not capable of providing the required working conditions. The aim of this study is to design and assemble of a low-cost H-Bot based bioprinter that allows multimicro-extrusion to form complex tissue models in a closed cabin and sterile conditions. In this study, a micro-extrusion based bioprinter, Bio-Logic, with three different print heads, namely, Universal Micro-Extrusion Module (UMM), Multi-Micro-Extrusion Module (MMM), and Ergonomic Multi-Extrusion Module (EMM) were developed. The print heads were tested and scaffold models were bioprinted and analyzed. Bio-Logic was compared in price with the commercially available bioprinters. Scaffold fabrication was successfully performed with Bio-Logic. The average pore size of the scaffold was determined as 0.37±0.04 mm (n = 20). Total cost of Bio-Logic was considerably less than any other commercially available bioprinters. A new system is developed for bioprinting of complex tissue models. The cost of the system is appropriate for research and features of the device may be upgraded according to the needs. Bio-Logic is the first H-Bot kinematics based bioprinter and has ability to measure atmospheric conditions in a closed cabin.
29 July 2024 in Bangladesh Journal of Medical Science
Background: The exposure to growth hormone (GH) and increase in insulin-like growth factor 1 (IGF-1) in acromegaly can cause various clinical findings related to the cardiovascular, respiratory, and musculoskeletal systems. GH exerts its anabolic effects directly or indirectly through IGF-1, by increasing cell proliferation and maturation in various tissues, including bone, cartilage, skeletal muscle, and tendons. The aim of this study is to analyze these changes using baropodometric gait analysis. Methods: Our study was conducted with a sample of 41 acromegaly patients and 42 control group individuals. Static, dynamic, and stabilometric baropodometric analyses were performed, as well as podoscanner analysis. Results: According to the dynamic and static baropodometric analyses of both groups, the standing load distribution and stabilometric Romberg index findings were similar. However, the acromegaly group showed a higher prevalence of pes planus findings compared to the control group (p<0.003). Conversely, the control group showed a higher incidence of callus and corn formation (p=0.01). Conclusions: Pes planus can disturb the load distribution in the foot, leading to the formation of pressure points. High pressure on the plantar surface of the foot is associated with the development of callus and corn. In this study, although pes planus was more common in the acromegaly group than in the control group, callus and corn formation in the forefoot region were higher in the control group (p=0.01). It was suggested that the soft tissue hypertrophy in acromegaly may be protective against callus and corn formation, which are expected to develop due to pressure. The podiatric approach can be used in other endocrinological diseases that affect the musculoskeletal system, such as acromegaly, especially in diabetic patients. Conducting baropodometric analysis and balancing load distribution with insoles can contribute to reducing the risk of fracture in acromegaly patients. Future studies with larger patient groups, including clinical and radiological findings, can be performed to further evaluate these results. Bangladesh Journal of Medical Science Vol. 23 No. 03 July’24 Page : 698-705
Calcaneal ulcers, a significant complication in diabetic patients, are primarily caused by sustained mechanical stress. Therefore, making effective offloading is crucial for healing and prevention. However, a comprehensive understanding of how different geometric offloading elements and their volumetric variations influence biomechanical efficacy remains limited. The aim of this study is to systematically investigate three distinct offloading insole geometries (cylindrical, spherical, conical), each across three volumetric variations (10 mm, 20 mm, and 30 mm diameters) to reveal the exact biomechanical efficacy. In this scope, patient specific dynamic gait analysis results were utilized to perform more accurate Finite Element Analysis (FEA). A single healthy researcher was used as a model for this feasibility assessment. Gait analysis showed that all geometries reduced overall peak plantar pressure compared to barefoot walking. Findings indicated that the conical geometry achieved the greatest pressure reduction (approximately 34.5% in both feet). However, FEA revealed that this configuration also introduced higher localized stress concentrations, particularly in larger diameters. The spherical geometry offered a balanced approach with adequate offloading and more favorable internal stress distribution. The cylindrical geometry exhibited the most consistent and lowest stress values across all sizes, with predictable scaling. The relationship between void volume and offloading effectiveness was found to be non-linear and highly geometry-dependent. The integration of gait analysis and FEA provides a robust framework for evaluating offloading insoles, offering insights into both immediate pressure reduction and long-term material performance. These findings deliver evidence-based guidelines for the rational design of patient-specific offloading interventions, contributing to improved wound healing and reduced recurrence in calcaneal ulcer management.
Partial foot amputations (PFAs) from diabetes cause major biomechanical deficits. A digital workflow for a patient-specific silicone prosthesis was developed, integrating 3D scanning, CAD with an ulcer off-loading cavity, and multi-part mold fabrication via MSLA 3D printing. Controlled casting with medical-grade silicone (Shore A 30.2) used a novel spacer to ensure a uniform 3 mm wall thickness. Dynamic gait analysis demonstrated that the prosthesis substantially improved load distribution. Maximum plantar pressure was reduced by 36.8%, from 3523.8 g/cm2 to 2225.1 g/cm2, closely matching the healthy foot value of 2245.2 g/cm2. The prosthesis normalized pressure patterns, increasing the medial midfoot contact area from 0.25 cm2 to 2.75 cm2 to promote stability, and the integrated cavity successfully created a pressure relief zone at the ulcer site. Material characterization confirmed the silicone’s targeted compliance (Shore A 30.2) and high elasticity. This end-to-end digital pipeline produced a custom prosthesis that restored near-physiological loading, provided targeted ulcer off-loading, and improved midfoot stability. The methodology offers a reproducible, accurate, and clinically effective alternative to traditional fabrication, with promising implications for improving mobility and wound management in diabetic PFA patients.