This paper proposes a strategy to broaden complete bandgap attenuating flexural and longitudinal modes, and to shift them to lower frequencies by spatially folding designs. Numerical simulations show that the V-folded acoustic black hole beam exhibits an ultra-wide complete bandgap below 1 kHz due to longitudinal-flexural waveform transformation, and experimental results verify this finding. The proposed folded beams are easy-to-fabricate, of compact dimensions, and exhibit excellent wave attenuation functionality that makes them promising for low-frequency vibration reduction and wave attenuation applications.
1 August 2020 in The Journal of the Acoustical Society of America
This paper proposes a strategy to broaden the sound absorption region of porous materials by embedding ribs. The theoretical solution and the numerical simulations of the optimization model show that the composite metastructure exhibits ultra-wide high absorption characteristics and an average sound absorption coefficient of 0.937 in the 0–10 kHz range upon its teaching-learning-based optimization. High sound pressures are present only among the embedded ribs. A significant slowing down of the sound takes place inside the metastructure. The impedance tube test confirms the design of the broadband sound absorption region in agreement with the teaching-learning-based optimization method.
20 November 2019 in Continuum Mechanics and Thermodynamics
This study presents a peridynamic (PD) constitutive model for visco-hyperelastic materials under homogenous deformation. The constitutive visco-hyperelastic model is developed in terms of Yeoh strain energy density function and Prony series. The material parameters in the model are identified by optimizing the classical stress–strain relation and tension test data for different strain rates. The peridynamic visco-hyperelastic force density function is proposed in terms of the peridynamic integral and the Yeoh strain energy density. The time-dependent behaviour for different strain rates is captured by numerical time integration representing the material parameters. The explicit form of peridynamic equation of motion is then constructed to analyse the deformation of visco-hyperelastic membranes. The numerical results concern the deformation and damage prediction for a polyurea membrane and membrane-type acoustic metamaterial with inclusions under homogenous loading. Different surface defects are considered in the simulation. The peridynamic predictions are verified by comparing with finite element analysis results.
In order to achieve low-frequency broadband noise control under subwavelength thickness, this paper established a theoretical model for calculating the sound absorption coefficient of curled acoustic metasurface (CAM) composed of embedded hole, equal width curled channel, and gradient width curled channel, which is based on the thermal viscosity equivalent model and impedance equivalent model. Considering the over resistance effect caused by multi-unit composite structure, a multi-parameter control strategy was used to design bending acoustic metasurface (BAM) units for perfect sound absorption at four discrete frequencies of 546 Hz, 563 Hz, 585 Hz, and 601 Hz, which is based on the complex frequency plane method. and the thicknesses of these unites are only (1.2 cm). The broadband and efficient sound absorption effect of the four parallel composite BAM units was theoretically studied. The simulation and experiment verified that the composite BAM not only achieved perfect sound absorption at 573 Hz with a subwavelength thickness of 12 mm, but also had an efficient sound absorption(α > 0.8) frequency band of 512Hz-621Hz, with a bandwidth up to 109 Hz. The research in this paper provides a certain theoretical basis for the design of low-frequency broadband compact acoustic structures, and has certain reference value for low-frequency broadband noise control.
31 July 2023 in IEEE Transactions on Aerospace and Electronic Systems
A direction-of-arrival (DOA) tracking algorithm based on AVS pseudo-smoothing, referred to as the FOC-M $\delta$ -GLMBF algorithm, is proposed to track coherent acoustic targets. This algorithm adapts the marginalized $\delta$ -generalized labeled multi-Bernoulli (M $\delta$ -GLMB) fast filtering algorithm with the fourth-order cumulants (FOC) pseudo-smoothing. It introduces higher-order cumulants capable of suppressing Gaussian noise, and constructs the cumulant matrices and the likelihood function that can be used for AVS pseudo-smoothing. The processing enhances the signal-to-noise ratio (SNR) by suppressing measurement noise, and can accomplish decoherence when there are coherent targets. Based on the labeled random finite set (RFS), it additionally introduces the index label to distinguish different motion models as hidden states, and achieves better tracking performance through the weighted mixture of multiple models. By using the AVS hybrid signal as the measurement, the algorithm avoids measurement-to-track association maps in the filtering process, to effectively support the tracking problem when targets are close to each other or have intersecting trajectories. In addition, as a joint prediction-and-update strategy, the algorithm performs the hypothesis truncation by the K-shortest path method only once, thereby further compensating for the burden of cumulant calculation. Simulations and field experiments verify the superiority of the proposed tracking algorithm for coherent targets under low SNR.