Lunqiu Zhang

Lunqiu Zhang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2022 in Processes
Verified
Journal Article
Open access
PDF file
Jiling LiangJiling Liang
Jiling Liang
HHHan He
Han He
JWJianwei Wei
Jianwei Wei
THTingting Han
Tingting Han
WWWenwu Wang
Wenwu Wang
HMhaiqiang Ma
haiqiang Ma
In an attempt to effectively utilize a multitude of surplus sludge from sewage treatment plants, ordinary Portland cement was used to solidify the dry surplus sludge as a building material. The dry surplus sludge and cement were mixed at different proportions with a certain dosage of water and then cured for 3–60 days at room temperature. The unconfined compression strength (RC) of solidified blocks was investigated with respect to the effects of the ratio of liquid to solid (Rl/S), surplus sludge dosage (DS), the dosage of sodium silicate (DNa2SiO3), and the proportion of fly ash (WF). The fabricated solidified blocks were characterized by scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), and X-ray Diffraction Analysis (XRD). The results demonstrated that RC at 60 days reduced obviously with the increase in Rl/s when Ds was given, whereas RC reduced with DS increased to 15.0 wt% from 5.0 wt% for solidified blocks. When DS was 5.0 wt%, RC of 28 days was reduced from 20.87 MPa to 14.50 MPa, with an increase in Rl/s from 0.35 to 0.55. For the given Rl/s, such as Rl/s = 0.35, RC at 60 days was 23.75 MPa, 2.80 MPa, and 2.50 MPa when DS were 5.0 wt%, 10.0 wt%, and 15.0 wt%, respectively, which were relatively lower in comparison to that of Portland cement solidified blocks without surplus sludge (51.40 MPa). In addition, the addition of Na2SiO3 and fly ash was favorable in terms of improving the RC for solidified blocks. RC of 60 days increased initially and then reduced with the increase in DNa2SiO3 from 0.0 wt% to 9.0 wt% at Rl/s = 0.45 and DS = 5.0 wt%. At DNa2SiO3 = 7.5 wt%, Rl/s = 0.45, and DS = 5.0 wt%, the highest RC value of 34.70 MPa was achieved after being cured for 60 days. Furthermore, RC of 60 days increased initially and then reduced with WF increasing from 0.0 wt% to 25.0 wt%, and the highest RC value of 34.35 MPa was achieved at WF = 10.0 wt%, Rl/s = 0.45, and DS = 5.0 wt%. At the ratio of DNa2SiO3 = 7.50 wt%, Rl/S = 0.35, WF = 20 wt%, DS = 15.0 wt% and M = 1.00, RC of 28 days reached 26.70 MPa. With these values, the utilization of sludge utilized (DS = 15.0 wt%) was increased by double compared with DS = 5.0 wt% (20.87 MPa). To investigate the effect of environmental temperature on the mechanical properties and mass of solidified blocks, the freeze-thaw cycling experiment was carried out. The RC of 28 days and the mass of the solidified block reduced with the number of freeze-thaw cycles, increasing for solidified blocks with DS of 5.0 wt%, 10.0 wt%, and 15.0 wt%, manifesting a decrease of 25.60%, 32.30%, and 40.60% for RC and 3.40%, 4.10%, and 4.90% for mass, respectively. This work provides sufficient evidence that surplus sludge has a huge potential application for building materials from the perspective of improving their mechanical properties. It provides an important theoretical basis for the disposal as well as efficient utilization of sludge.

31 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
Jiling LiangJiling Liang
Jiling Liang
THTingting Han
Tingting Han
WWWenwu Wang
Wenwu Wang
LZLunqiu Zhang
Lunqiu Zhang
YZYan Zhang
Yan Zhang
To design more environmentally friendly, economical, and efficient demulsifiers for oily wastewater treatment, hydrophobic octadecylphosphonic acid (ODPA)-modified Fe3O4 nanoparticles (referred to as Fe3O4@ODPA) were prepared by condensation of hydroxyl groups between ODPA and Fe3O4 nanoparticles using the co-precipitation method. The prepared magnetite nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric/differential thermogravimetric (TG/DTG) analysis. The water contact angles (θW) of Fe3O4@ODPA nanoparticles were more than 120°, indicating hydrophobic nature, and the diameter of the obtained spherical-shaped magnetite nanoparticles was 12–15 nm. The ODPA coating amount (AO) (coating weight per gram Fe3O4) and specific surface area (SO) of Fe3O4@ODPA were 0.124–0.144 g·g−1 and 78.65–91.01 m2·g−1, respectively. To evaluate the demulsification ability, stability, and reusability, the magnetite nanoparticles were used to demulsify an n-hexane-in-water nanoemulsion. The effects of the magnetite nanoparticle dosage (CS), pH value of nanoemulsion, and NaCl or CaCl2 electrolytes on the demulsification efficiency (RO) were investigated. The RO of Fe3O4@ODPA samples was found to be higher than that of bare Fe3O4 samples (S0, ST, and SN) under all CS values. With the increase in CS, the RO of Fe3O4@ODPA samples initially increased and then approached equilibrium value at Cs = 80.0 g·L−1. A maximum RO of ~93% was achieved at CS = 100.0 g·L−1 for the Fe3O4@ODPA sample S2. The pH and two electrolytes had a minor effect on RO. The Fe3O4@ODPA nanoparticles maintained high RO even after being reused for demulsification 11 times. This indicates that the hydrophobic Fe3O4@ODPA samples can be used as an effective magnetite demulsifer for oil-in-water nanoemulsions.

7 June 2025 in Molecules
Verified
Journal Article
Open access
PDF file
SJSong Jiang
Song Jiang
LWLu Wang
Lu Wang
SWShuo Wang
Shuo Wang
Jiling LiangJiling Liang
Jiling Liang
GLGuang Lu
Guang Lu
LZLunqiu Zhang
Lunqiu Zhang
Considering the implications for the environment and human health, oil-contaminated soil generated in the petroleum industry requires treatment. Chemical cleaning represents an effective treatment approach for oil-contaminated soil and has attracted considerable attention. In this study, sodium d-gluconate (C6H11NaO7), trisodium citrate (C6H5Na3O7), and L-arginine (C6H14N4O2) were employed as detergents to remove oil from oily sludge. The impacts of sludge (solid) concentration (CS), types of detergents, temperature (T), and pH value on the deoiling efficiency (De) were systematically investigated. The results indicated that at a given detergent concentration (CDG) and CS, De followed the order C6H11NaO7 > C6H5Na3O7 > C6H14N4O2. When CS was 3.86 g·L−1 and CDG was 10.0 g·L−1, sodium d-gluconate achieved a maximum De of approximately 85%. Additionally, at a fixed CS, De decreased as the pH value increased, while it increased with increasing temperature. Interestingly, during the deoiling equilibrium, an obvious “solid effect” (or CS−effect) was observed. The “solid effect” refers to the phenomenon where the oil distribution coefficient (KD) changes with an increase in CS. The observed CS effect was described using the surface component activity (SCA) model. The values of the intrinsic distribution coefficient (KD0) and CS−effect constant (γ), which are the model parameters of the SCA model, were derived from three detergent−sludge systems under different temperatures (T) and pH values. The strength of the CS effect (or γ value) was found to be independent of detergent type and increased as T and pH value increased. This study broadens the application range of the SCA model and contributes to a deeper understanding of the adsorption and desorption behavior of oil droplets at the solid−liquid interface.