Film hole irrigation is a relatively low cost and high efficiency irrigation method, which can significantly improve the efficiency of agricultural water use. In order to establish the quantitative model of film hole irrigation between cumulative infiltration and the wetting body and the irrigation volume model of crops, the infiltration process and wetting body characteristics of four different soils (Xi’an silt loam, silt, silt loam and loam) were studied in laboratory experiments and numerical HYDRUS simulation experiments. The relationship between cumulative infiltration and wetting body radius was established using a mathematical method, and a crop irrigation volume model was proposed based on the root distribution and the required water content of different crops. The experimental results showed that the shape of the wetting body of film hole irrigation is approximately half of the rotating ellipsoid, and the curve shape of the wetting front can be expressed using an elliptic equation. From the center of the film hole to the surface of the wetting front, the soil water content of the wetting body gradually decreases, and the change rate of water content gradually increases, reaching its maximum value near the wetting front. Furthermore, the distribution of water content in the wetting body can be accurately expressed using an elliptic curve equation. The cumulative infiltration of film hole irrigation is proportional to the third power of the equivalent radius of the wetting body, and the equivalent radius is equal to the geometric mean of the horizontal and vertical migration distances of the wetting front. In addition, based on the distribution of crop roots and the demand of crop roots on soil water content, the irrigation model of crops was established. This study provides a theoretical basis for the calculation of the irrigation volume for film hole irrigation under the condition of experiment, and has a guiding significance for the field experiment and application of film hole irrigation in different crops in future.

Film hole irrigation under muddy water conditions is a new and effective water-saving irrigation technology. In order to determine the influence of multiple factors on the infiltration process of film hole irrigation under muddy water conditions, 12 sets of indoor infiltration tests were conducted to investigate the effects of four key influencing factors (muddy water sand content, hole diameter, soil bulk density, and infiltration time) on the infiltration characteristics of irrigation with film holes under muddy water conditions, in this study. Based on the experimental data, accurate and effective soil water infiltration and vertical and horizontal wetting front transport models were constructed. Based on the modeling results, the standard regression coefficients of each influencing factor against the fitted parameters were calculated and the effects of the factors on the fitted parameters were analyzed. Error analysis showed that both models could effectively simulate the soil water infiltration process under experimental conditions. Infiltration time was the dominant factor influencing the cumulative infiltration per unit of film hole area, followed by hole diameter, muddy water sand content and lastly, soil bulk density. Infiltration time was also the main influencing factor of the vertical wetting front transport distance, followed by soil bulk density, muddy water sand content, and lastly, hole diameter. Similarly, infiltration time exerted the greatest effect on the horizontal transport distance, followed by hole diameter, soil bulk density and muddy water sand content. The model validation revealed that both the calculated and measured values were distributed around the 1:1 line, reflecting the accuracy of the models. The results of this study can provide theoretical support for the design of film hole irrigation systems under muddy water conditions.

Effects of the sand content of muddy water content on one-dimensional vertical infiltration characteristics and dense layer formation characteristics