The vibrations of plate structures placed in a supersonic flow was considered. The undisturbed fluid flow was parallel to the plate. This type of problem is especially important in the aerospace industry, where it is named panel flutter. It has been noticed for a long time that panel flutter may be problematic at high speeds. In this article, two specific problems were treated: in the first one, the plate was in the form of an infinite strip and the flow was in the direction of its finite length. Rigid walls indefinitely extended from the sides of the plate. In the second problem, the plate was a finite rectangle and the flow was parallel to one of its sides. The rest of the plane of the rectangle was again rigid. The first problem was a limiting case of the second problem. The flow was modeled by piston theory, which assumes that the fluid pressure on the plate is proportional to its local slope. This approximation is widely used at high speeds (supersonic speeds in the range of M > 1), and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution was also found by using the collocation method. The contribution of this study is the correlation between the flutter velocity and the other parameters of the plate. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows for the quick estimation of the flutter velocity. These simple expressions were deduced by least squares fits to the computed flutter velocities.
21 August 2023 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Teknolojinin gelişimi ile birlikte hareket ve kontrol mekanizmaları çok eksende hareket edebilen, daha hızlı ve hassas hareket sağlanabilecek cihazlara ihtiyaç duymaktadır. Bu nedenle; küresel koordinat sisteminde elektromanyetik sistemlerin parametrelerinin analitik veya yarı analitik yöntemlerle hesaplanması son yıllarda önemli araştırma konularından biri haline gelmiştir. Bu çalışmada manyetik bir nüve içerisine sarılmış çok sarımlı bobin yapısı incelenmiştir. Öncelikle tek sarımlı bobin yaklaşımından yararlanarak çok sarımlı bobinler için B, E ve A ifadeleri analitik olarak hesaplanmıştır. Aynı geometriler, sonlu elemanlar analizi (FEA) kullanılarak ANSYS Maxwell programında dairesel simetri kabulü ile hesaplanmıştır. Son olarak, biri r1 yarıçapına sahip manyetik nüve içerisinde olan, eş merkezli iki bobin geometrisi belirlenmiştir. Bu geometriler için öz indüktans (Lii) ve karşılıklı indüktans (Mij) katsayıları küresel koordinatlarda γ açısına bağlı olarak incelenmiştir. ANSYS Maxwell programı üzerinde bobin geometrilerinin 3 boyutlu modeli oluşturularak benzetim çalışmaları yapılmıştır. FEA ve analitik sonuçlar kıyaslanarak geçerliliği gösterilmiştir.
28 March 2024 in Journal of Vibration Engineering & Technologies
Research Problem: The eigenvalue problem for the vibrations of an arbitrarily-curved three-dimensional beam with circular cross-section is solved by a series expansion method under various boundary conditions. Methodology: The governing differential equations of motion are derived based on Euler-Bernoulli beam theory using the Hamilton’s principle. The general equations are given for any space curved beam with variable curvature and torsion, and solved for a specific example using the method of power series. Results and Conclusions: The eigenfrequencies of a specific 3D beam were computed and compared with the eigenfrequencies of straight, circular, and helical beams, all having the same length. It was found that the eigenfrequencies of the 3D beam tend to increase slower compared to the other cases as the mode number increases. The main contribution of this study is the computation of the eigenfrequencies of a truly three-dimensional beam: torsion and curvature change continously along the beam length. In constrast, the most studied 3D case, helical beam, has constant curvature and torsion.
18 December 2023 in Sakarya University Journal of Science
A large variety of new methods are being developed for fast and efficient solutions of nonlinear boundary value problems. Some of these methods are, Adomian decomposition (ADM), differential transform (DTM), least squares vector machines (LSSVMM), and multiple variational iteration (MVIM). A natural question arises as to how efficient and simple to use these newer methods are compared to classical methods. One of the simplest and widely applicable classical methods is the collocation method. The overall performance of collocation method and the newer methods are compared on a number of problems, which were previously used to benchmark the newer methods. It is concluded that, at least for the problems considered, the collocation method performs as successfully as the newer methods.
3 December 2023 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Integro-differential equations are encountered in such fields of study as mechanics, physics, chemistry, biophysics, astronomy, economic theory, and population dynamics. In rare cases the solution methods for differential and/or integral equations can be generalized to integro-differential equations; but in general, numerical methods have to be applied. Recent years have seen the development of a large number of methods applicable to integro-differential equations. The present study aims to compare these newer methods with the classical method of point collocation, which is one of the weighted residual methods. The method was applied to test problems chosen from the literature, both linear and nonlinear integro-differential equations, and was seen to give good results.
15 December 2023 in Karadeniz Fen Bilimleri Dergisi
In several engineering or physics problems, particularly those involving electromagnetic theory, thermal and radiation effects, acoustics, elasticity, and some fluid mechanics, it is not always easy or possible to find the analytical solution of integral equations that describe them. For this reason, numerical techniques are used. In this study, Point-collocation method was applied to linear and nonlinear, Volterra and Fredholm type integral equations and the performance and accuracy of the method was compared with several other methods that seem to be popular choices. As the base functions, a suitably chosen family of polynomials were employed. The convergence of the method was verified by increasing the number of polynomial base functions. The results demonstrate that the collocation method performs well even with a relatively low number of base functions and is a good candidate for solving a wide variety of integral equations. Nonlinear problems take longer to calculate approximate solution coefficients than linear problems. Furthermore, it is necessary to use the real and smallest coefficients found in order to obtain a suitable approximate solution to these problems.