A magnitude (Mw) 7.4 Maduo earthquake occurred on 22 May 2021 in the northern Qinghai-Tibet Plateau, with predominantly left-lateral strike-slip faulting and a component of normal faulting within the Bayan Har Block. The co-seismic surface rupture extended in a NWW direction for ~160 km with a complicated geometry along a poorly known young fault: the Jiangcuo Fault. The main surface rupture propagated bilaterally from the epicenter and terminated eastward in horsetail splays. The main rupture can be divided into five segments with two rupture gaps. Field surveys and detailed mapping revealed that the co-seismic surface ruptures were characterized by a series of left-lateral offsets, en echelon tensional cracks and fissures, compressional mole tracks, and widespread sand liquefication. The observed co-seismic left-lateral displacements ranged from 0.2 m to ~2.6 m, while the vertical displacements ranged from 0.1 m to ~1.5 m, much lower than the InSAR inverse slip maximum of 2–6 m. Based on the comprehensive analysis of the causative fault geometry and the tectonic structure of the northern Bayan Har Block, this study suggests that the multiple NWW trending sub-faults, including the Jiangcuo Fault, developed from the East Kunlun fault northeast of the Bayan Har Block could be regarded as the sub-faults of the East Kunlun Fault system, constituting a broad and dispersive northern boundary of the Block, controlling the inner strain distribution and deformation.

On 8 January 2022, a seismic event of significant magnitude (Mw 6.7, Ms 6.9) occurred in the northeastern region of the Tibetan Plateau. This earthquake was characterized by left-lateral strike-slip motion, accompanied by a minor reverse movement. The Menyuan earthquake resulted in the formation of two main ruptures and one secondary rupture. These ruptures were marked by a left-lateral step zone that extended over a distance of 1 km between the main ruptures. The length of the rupture zones was approximately 37 km. The surface rupture zone exhibited various features, including left-lateral offset small gullies, riverbeds, wire fences, road subgrades, mole tracks, cracks, and scarps. Through a comprehensive field investigation and precise measurement using unmanned aerial vehicle (UAV) imagery, 111 coseismic horizontal offsets were determined, with the maximum offset recorded at 2.6 ± 0.3 m. The analysis of aftershocks and the findings from the field investigation led to the conclusion that the earthquake was triggered by the Lenglongling fault and the Tuolaishan fault. These faults intersected at a release double-curved structure, commonly referred to as a stepover. During this particular process, the Lenglongling fault was responsible for initiating the coseismic rupture of the Sunan–Qilian fault. It is important to note that the stress applied to the Tuolaishan fault has not been fully relieved, indicating the presence of potential future hazards.

The Minle-Yongchang fault is an active reverse fault-related fold structural belt developed in the Hexi Corridor Basin on the northeastern edge of the Tibetan Plateau. An earthquake of Ms6.1 occurred near the Minle-Yongchang fault zone in 2003. The deformation pattern of the Minle-Yongchang fault and its relationship with this strong earthquake, however, are still not well known. In this study, we used the methods of HYPOINVERSE absolute location and double-difference location with waveform cross-correlation technology to relocate the 2003 Minle earthquake sequence. In total, 383 earthquakes are precisely relocated. Based on the results of precise seismic relocation, using the method of determining fault planes by small earthquakes, the seismogenic fault is found to be a low-angle thrust with a strike of 311°, a dip of NE, and a dip angle of 14°. It does not rupture the surface, extends to 19–20 km depth, and is hidden beneath the Yonggu Anticline. We also employed the cut-and-paste (CAP) method with a broadband waveform to determine the focal mechanism of the mainshock in 2003: the strike is 311°; the dip is 34°; and the rake is 90°. The fault plane parameters obtained in these two ways are roughly consistent. We also used a digital elevation model (DEM) derived from the SPOT 6 stereo image pair and high-precision differential Global Positioning System (GPS) to measure the displacement of terraces. Topographic profiles along the terraces across the Minle-Yongchang fault show that high alluvial terrain exhibits fold deformation. The vertical offsets of the T2 and T3 terraces along the Tongziba River are approximately 2.3 and 22 m, respectively. Optically stimulated luminescence (OSL) dating indicates that the ages of T2 and T3 are 11.3 and 106 ka, respectively. We calculated an average uplift rate of 0.21 ± 0.05 mm/a by dividing the vertical offset by age. According to the spatial distribution of the relocated earthquake sequence and terrace deformation in the study area, the Ms6.1 Minle earthquake in 2003 was caused by the latest activity of a blind reverse fault-related fold in the Hexi Corridor Basin.

The 143 A.D. west Gangu earthquake is documented to have occurred in the West Qinling area, which is located on the northeastern margin of the Tibetan Plateau. Initial limited historical records suggest the earthquake took place along the West Qinling fault (WQLF) in the western region of Gangu County. However, the absence of corresponding geological and geomorphological evidence has posed a considerable challenge in accurately quantifying parameters such as the precise location, magnitude, and seismogenic fault segment in earlier investigations. In this study, a comprehensive examination of multiple residual surface rupture zones within the macroseismic zone of this earthquake enabled the determination of the seismogenic structure, magnitude, and rupture zone scale through diverse methodologies, which include field geological investigations, chronology testing, Unmanned Aerial Vehicle (UAV) aerial surveying, and interpretation of landslides along the fault zone. The results reveal that the seismogenic structure of this seismic event is associated with the Zhangxian fault segment of the WQLF, also marked by a dense distribution of large landslides from Zhangxian to Yuanyangzhen. The epicenter was identified at the eastern end of the Zhangxian fault segment of the WQLF. Furthermore, the magnitude of the 143 A.D. west Gangu earthquake is estimated to be approximately Ms 7–7.3, with the residual surface rupture zone intermittently extending over about 22 km and a maximum horizontal dislocation along the rupture zone of 2.8 ± 0.5 m. This detailed investigation contributes foundational insights for further evaluating the seismic risk across various segments of the WQLF.

《地球科学》(ISSN 1000-2383;CN42-1874/P) (原刊名《地球科学——中国地质大学学报》ISSN 1000-2383;CN42-1233/P)，创刊于1957年，是由教育部主管、中国地质大学主办的综合性地学学术理论期刊，月刊，2015年改名为《地球科学》,她以反映中国地质大学教学与科研最新的、高水平的基础地质、应用地质、资源与环境地质及地学工程技术研究成果为主要任务。

The Eastern Tianshan region, influenced by the far-field effect of northward compression and expansion of the Qinghai-Xizang block, features highly developed Late Quaternary active faults that exhibit significant neotectonic activity. Historically, the Barkol-Yiwu Basin, located to the north of the Eastern Tianshan, experienced two major earthquakes in 1842 and 1914, each with a magnitude of M7¹/₂. In contrast, the Hami Basin on the southern margin of the Eastern Tianshan has no historical records of any major earthquakes, and its seismic potential, mechanisms, and future earthquake hazards remain unclear. Based on satellite image interpretation and field surveys, this study identified a relatively recent and well-preserved seismic surface rupture zone with good continuity in the Liushugou area of the western segment of the Northern Margin Fault of the Hami Basin (HMNF), which is the seismogenic structure responsible for the rupture. The surface rupture zone originates at Kekejin in the east, extends intermittently westward through Daipuseke Bulake and Liushugou, and terminates at Wuzun Bulake, with a total length of approximately 21 km. The rupture zone traverses the youngest geomorphic surface units, such as river beds or floodplains and first-order terraces (platforms), and is characterized by a series of single or multiple reverse fault scarps. The morphology of fault scarps is clear, presenting a light soil color with heights ranging from 0.15 m to 2.13 m and an average displacement of 0.56 m, suggesting that this surface rupture zone likely represents the most recent seismic event. Comparison with historical earthquake records in the Eastern Tianshan region suggests that the rupture zone may have been formed simultaneously with the Xiongkuer rupture zone by the 1842 M7¹/₂ earthquake along the boundary faults on both sides of the Barkol Mountains, exhibiting a flower-like structural pattern. Alternatively, it might represent a separate, unrecorded seismic event occurring shortly after the 1842 earthquake. The estimated magnitude of the associated earthquake is about 6.6~6.9. Given that surface-rupturing earthquakes have already occurred in the western segment, the study indicates that the Erdaogou–Nanshankou section of the HMNF has surpassed the average recurrence interval for major earthquakes, indicating a potential future earthquake hazard.