This article discusses the possibility of the fabrication of a highly sensitive sensor based on single-walled carbon nanotubes surface modified with functional amino groups (-NH₂). The sensor potential for detection of alkali (sodium, lithium, and potassium) metals was investigated. The results of computer simulation of the interaction process between the sensor and an arbitrary surface of the modified tube containing atoms of the studied metals are presented. The calculations were carried out within the framework of the density functional theory (DFT) method using the molecular cluster model. It has been proved that surface-modified ammonium carbon nanotubes show high sensitivity for the metal atoms under study.

Introduction of substitution atoms into carbon nanotubes is an efficient tool of controlling their physicochemical properties which allows one to expand their practical applications. Boron is one of the most promising materials used for the modification of carbon nanotubes. However until now there has been no systematization of research data on the effect of boron impurity atoms on the properties of carbon nanotubes, and this limits potential industrial applications of this nanomaterial. In this work the most efficient currently existing methods of synthesizing carbon nanotubes containing boron impurity atoms have been discussed and the physicochemical properties of the obtained nanomaterials have been analyzed. Furthermore predictions as to their potential application domains have been made on the basis of available theoretical and experimental results. Comparison of the developed technologies has shown that the most efficient synthesis method is the catalytic vapor phase deposition. The mechanical, electronic and chemical properties of boron-carbon nanotubes have also been reviewed. For a more comprehensive analysis of the dependence of the physicochemical properties of carbon nanotubes on the concentration of boron impurity a model experiment has been carried out involving quantum mechanics instruments which has shown a direct correlation between the band gap of the material and the number of boron impurity atoms. The main practical application trends of boron-containing carbon nanotubes have been outlined.

In the last decade, the development of new materials that absorb electromagnetic radiation (EMR) has received research interest as they can significantly enhance the performance of electronic devices and prevent adverse effects caused by electromagnetic pollution. Electromagnetic radiation absorbers with a low weight and small thickness of the absorber layer, good absorption capacity, and a wide frequency response bandwidth are highly demanded. Here, for the first time, the properties of polymer nanocomposites FeCoCr/C synthesized by doping FeCoCr alloy nanoparticles into a polymer matrix of pyrolyzed polyacrylonitrile are investigated. An analysis of the magnetic properties of FeCoCr/C nanocomposites showed that increasing the synthesis temperature increased the specific magnetization and coercive force values of the FeCoCr/C nanocomposites. The dependence between the ratio of metals in the precursor of pyrolyzed polyacrylonitrile and the electromagnetic and wave-absorbing properties of FeCoCr/C nanocomposites is considered, and the results of complex dielectric and magnetic permeability measurements are analyzed. It is found that the most promising of all the studied materials are those obtained at T = 700 °C with the ratio of metals Fe:Co:Cr = 35:35:30.

A design scheme of nanosized sensors based on BC3boron-carbon nanotubes (BCNTs) surface-modified by a carboxy group (surface-carboxylated nanotubes) is considered. The potential usefulness of...

Nanotubes, being one of the most demanded nanotechnology materials, are finding new areas of application.