Emerging technologies that exhibit features of biodegradability and eco-friendliness are potential game changers. Paper is a cost-effective and easily available material that has proved itself a promising candidate for manufacturing strain sensors due to its easy integration into flexible electronics. In this work, an ultra-sensitive and highly stable strain sensor is presented. Easily available materials are used for sensors development and very easy and simple fabrication. The modified interdigital capacitor structure is fabricated on a simple printing paper, whereas copper tape is used as an electrode material. In the anticipated work, the milestones of high sensitivity, durability, and fast response time are achieved. The proposed flexible strain sensor is eco-friendly, bio-degradable, inexpensive, and responds well to applied strain. The proposed work exhibits a fast response time of 0.56 s. The high gauge factor value of 3040.26 and stability up to 5000 cycles. The proposed prototype has been also implemented on the human body for monitoring physical activities and fitness exercises. The proposed strain sensor is an outstandingly good option for assimilation into wearable systems like remote healthcare systems, electromechanical sensing, and human physical monitoring.
17 March 2023 in IEEE Journal on Flexible Electronics
There is a rapid increase in the use of affordable electronic devices and human-machine interfaces (HMIs) with short serviceable life in almost every aspect of our lives. It’s estimated that the Waste Electrical and Electronic Equipment (WEEE) and e-waste generated in year 2021 was 57.5 million metric tons (Mt) and it is expected that the production of e-waste will increase to 110 Mt by the end of 2050. To mitigate these wastes, green HMIs are required which can be customized for multiple applications and can be recycled or disposed of with minimal environmental impact. This work presents customizable graphite-on-paper (GOP) based keypad consists of interdigitated capacitive (IDC) touch sensors is demonstrated as HMIs to interact with different electronic and media applications wirelessly. The GOP keypads are fabricated through facile and green fabrication process by direct writing of graphite on flexible paper substrate. The GOP keypads can be fabricated in a home setting as the required materials are readily available, i.e., paper, pencils, Arduino. The GOP keypads can be easily disposed of or recycled at the end of its life or requirement due to the employment of biodegradable materials like paper and graphite. The IDC touch sensors are optimized by analyzing the number of electrode fingers, finger’s width, finger’s overlap length and spacing between the electrode fingers. The same GOP keypad is customized to interact with different electronic and media applications wirelessly i.e., laptop cursor navigation, calculator app on mobile, numeric keypad etc. The customizable GOP keypads have potential to be used as green wireless HMIs to enforce a circular economy by mitigating electronic and plastic waste, which leads to the vision of a sustainable and green world.
This paper presents the design and implementation of a cardboard-based triboelectric nanogenerator (CB-TENG) sensor for illuminating light and monitoring footsteps in children’s shoes. The sensor utilizes the triboelectric effect, where the material becomes electrically charged after friction to generate power from the foot’s motion. The sensor is integrated into the shoe’s sole and utilizes a simple circuit to convert the generated electricity into a usable form to power an LED light. The sensor also includes a step-counting mechanism to track the number of steps taken. Using a low-cost and sustainable material such as cardboard in the sensor’s design makes it an affordable and eco-friendly solution for illuminating and monitoring children’s shoes. The sensor was tested and found to have a high energy conversion efficiency, and the LED light provided sufficient illumination for the wearer. The step-counting mechanism was also found to be accurate in tracking the number of steps taken. The proposed sensor has the potential to be a useful tool for parents and caregivers to monitor the activity levels of children and ensure their safety in low-light conditions.
19 June 2026 in Journal of Medical and Biological Engineering