The deposition of high refractive index (HRI) nanocoatings has become one of the most effective techniques used to underpin light-matter interaction, and hence to optimize sensing performance of fiber optic devices towards single molecule detection. However, it is not always that true. Herein, we report on the general polarization-dependent sensing performance of nanocoated tilted fiber Bragg gratings (TFBGs), with the results demonstrating for the first time that the sensitivity of both P- and S-polarizations can be improved, but also greatly reduced after depositing HRI nanocoating. The investigations were performed for both high- and low-order modes excited in 10° and 4° TFBGs, respectively, coated with nanometer scale metal oxide film using the full-vector complex coupled mode theory (CCMT). The results reveal that the general sensing features significantly stem from the enhanced polarized dispersion properties tuned by the nanocoating through the mode transition. The analysis of evanescent field, dispersion characteristics, and spectral response clearly confirms the improvement and deterioration of both local and general sensing performances. Due to the enhanced polarization difference, the P-polarization usually presents higher sensitivity to bulk/volume RI changes, while the S-polarization could become more sensitive to surface changes, which enables the P-/S-polarization preferable for bulk/surface refractometric sensing applications. This thorough study reveals a new insight on nanocoated fiber optic sensors and turns out to be decisive in the performance optimization, which paves the way to applications in both bulk and surface RI-based sensing.
Tilted fiber Bragg grating (TFBG) presents many unique spectral characteristics for sensing. The widespread approaches to date are based on the cut-off mode resonance and surface plasmon resonance (SPR), whereas the leaky mode resonance is ignored in the literature. Herein, we theoretically demonstrate that the s-polarized (or TE/HE) leaky mode resonance (and the guided mode resonance) can be efficiently enhanced (and suppressed) by integrating graphene on the TFBG for highly sensitive sensor. In contrast, the p-polarized (or TM/EH) mode (both leaky mode and guided counterpart) presents slight variation. The enhancement principle is discussed based on the variation in the mode characteristics induced by the graphene. The results show that the graphene enhanced leaky mode resonance presents ultra-sensitive intensity response but insensitive wavelength response to the extremely small analyte perturbation. The sensitivities are achieved up to 14108dB/RIU and 5232.6dB/RIU for the first two leaky modes in gaseous media respectively, which are 121 and 13 times higher than that of bare TFBG. This novel sensing platform provides a promising technique that can compete with widespread SPR approach in fiber optic sensing fields, which opens up new opportunities for industrial, environmental, and biochemical sensing applications.
In this study, we propose and investigate a novel grating-assisted surface plasmon resonance (SPR) platform based on a silver coated long period fiber grating having a photosensitive cladding (C-LPFG). We show that the SPR mode is transited from the higher EH mode with an effective refractive index (ERI) close to that of the surrounding refractive index (SRI) and is highly sensitive to a change in the SRI. Compared with a conventional SPR sensor, a much higher sensitivity is obtained for the novel C-LPFG-based SPR sensor. The sensitivity can be further improved by reducing the fiber diameter. The numerical results show that the highest local sensitivity, which can be as high as , and the corresponding resolution of are achieved for the reduced silver coated C-LPFG sensor. Moreover, the -factor and the figure of merit exhibit better characteristics than those of the conventional LPFG-based SPR sensor. Our findings provide insight into the C-LPFG-based SPR platform being a potentially important area to explore for biochemical sensing.
In this work, we demonstrate a watt-level laser producing high-order, petal-shaped output modes with tunable topological charge, by using an axicon-based divergent annular pump beam. The topological charge of the output beam could be varied in the range of 34–72 by adjusting the position of the Nd:YVO4 crystal relative to the focal plane of the pump beam. The highest order petal-mode beam generated from the system had a topological charge of 72 and a power of 1.3 W. The highest output power up to 2.1 W with a topological charge of 34 was achieved at an absorbed pump power of 5.8 W. The generated output modes were observed to be robust under power scaling and on propagation, with the same spatial profiles being maintained in the near- and far-fields. We anticipate that this system design may find use as a laser source in applications such as 3D optical trapping, fabrication of optical vortex arrays, optical communications, and high-sensitivity spatial measurement.