Bedding-controlled landslides are a common geological hazard for open-pit metal mines and occur on layered rock slopes. It can spread spatially over the final boundary of the dip slope and persist throughout the entire life cycle of the mine, substantially compromising the safety of mining operations. Identifying potential landslide areas and determining the landslide mechanism is crucial for the safety production and slope management of mines. This study proposes a combination of satellite radar interferometry measurement and numerical simulation to determine the landslide mechanism of the bedding-controlled slope in open-pit mines. First, the multidimensional small baseline subset (MSBAS) technique of interferometric synthetic aperture radar (InSAR) is used to capture deformation information in the vertical and east–west directions of the slope, locate large-scale and long-term movements, and preliminarily determine the trend of landslides. Then, a layered slope damage constitutive model is established, and a three-dimensional stability calculation of the layered slope is performed using COMSOL Multiphysics 5.3 software based on the strength reduction method to study the development and evolution process of landslides. The effectiveness of the method is validated by a large-scale bedding-controlled slope failure in the Nanfen open-pit mine in Liaoning, China, revealing the failure mechanism of the slope under excavation conditions. The study shows that the eastern slope bedding-controlled landslide in the Nanfen open-pit mine is a multizone composite-mode landslide caused by excavation, which belongs to the shear–slip–tension deformation failure mechanism as a whole. This study provides a new method for analyzing the mechanism of layered rock slope landslides under mining activities in open-pit mines, which can be used to assess and predict similar landslides.

Shallow coal mining in gully regions has resulted in significant subsidence hazards and increased the risk of surface water inflow into mining panels, compromising the sustainability of surface water management and underground resource exploitation. In this study, the chain disaster process caused by shallow coal seam mining and heavy rainfall is quantitatively analyzed. The findings reveal that shallow coal seam mining leads to the formation of caved and fractured zones in the vertical direction of the overlying rock. The fractured zone can be further classified into a compression subsidence zone and a shear subsidence zone in the horizontal direction. The shear subsidence zone is responsible for generating compression and shear deformations, intercepting rainfall runoff, and potentially triggering landslides, necessitating crack landfill treatments, which are critical for promoting sustainable mining practices. The HEC-RAS program was utilized to integrate annual maximum daily rainfall data across different frequencies, enabling the establishment of a dynamic risk assessment model for barrier lakes. Numerical simulations based on unsaturated seepage theory provide insights into the infiltration and seepage behavior of rainfall in the study area, indicating a significant increase in saturation within lower gully terrain. Precipitation infiltration was found to enhance the saturation of the shallow rock mass, reducing matric suction in unsaturated areas. Finally, the disaster chain is discussed, and recommendations for managing different stages of risk are proposed. This study offers a valuable reference for the prevention and control of surface water damage under coal mining conditions in gully regions.