Jinhu Li

Dr. Jinhu Li


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2021 in Journal of Energy Resources Technology
Verified
Journal Article
Open access
PDF file
XLXuan Liu
Xuan Liu
KBKiran Raj G. Burra
Kiran Raj G. Burra
ZWZhiwei Wang
Zhiwei Wang
JLJinhu Li
Jinhu Li
DCDefu Che
Defu Che
AGAshwani K. Gupta
Ashwani K. Gupta
Syngas production from catalytic gasification of polystyrene and pinewood in CO2 atmosphere was investigated over Ni-Mg/Al2O3 catalyst in a fixed-bed reactor at 900 °C. A quasi in situ method was adopted for catalytic gasification wherein the catalyst placed downstream of the feedstock in the same reactor was used for enhanced syngas production. The effect of catalyst on evolutionary behavior, cumulative syngas yield, syngas composition, and cold gas efficiency was systematically analyzed. The results showed that addition of catalyst for polystyrene gasification resulted in enhanced yields of 63% H2, 20% CO, 119% CH4, and 85% C2-C3 yields. Enhanced H2 and light hydrocarbon yields were mainly from enhanced cracking of pyrolytic vapors from polystyrene degradation, while the CO yield was attributed to CO2-assisted reforming of benzene derivatives from primary cracking and polycyclic aromatic hydrocarbons (PAHs) from secondary gas phase condensations. The yields of H2, CO, CH4, and C2-C3 from pinewood gasification in the presence of catalyst was also enhanced by 150%, 14%, 39%, and 16%, respectively, indicating that Ni-Mg/Al2O3 catalyst can efficiently enhance syngas production in CO2-assisted gasification. A comparison of syngas composition between non-catalytic and catalytic conditions revealed improved syngas quality in catalytic gasification with increased H2 mole fraction but decreased CO mole fraction. Furthermore, cold gas efficiency enhanced from 44% to 57% in catalytic polystyrene gasification, and from 75% to 94% in catalytic pinewood gasification. The results suggest that catalytic CO2 gasification offers a promising pathway for efficient energy production from wastes plastics and biomass while simultaneously using CO2.

27 January 2021 in Journal of Energy Resources Technology
Verified
Journal Article
Open access
PDF file
XLXuan Liu
Xuan Liu
KBKiran Raj G. Burra
Kiran Raj G. Burra
ZWZhiwei Wang
Zhiwei Wang
JLJinhu Li
Jinhu Li
DCDefu Che
Defu Che
AGAshwani K. Gupta
Ashwani K. Gupta
Combined use of plastic and biomass wastes offers promising pathway for simultaneous energy production and waste disposal. In this article, the co-pyrolysis of pinewood and polycarbonate (PC) was performed in a fixed bed reactor to quantify their synergistic interaction on the product output and determine the effect of char intermediates on the synergistic effects. The extent of synergistic effects was obtained via a direct comparison of results from co-pyrolysis of pinewood–polycarbonate mixture with the weighted average values from pyrolysis of individual components. The observed synergistic effects were further examined from the influence of char intermediates using tailored feedstock configurations to gain more insights into the synergistic mechanism. The results showed co-pyrolysis resulted in enhancement by 33% in H2, 26% in CO, and 19% in total syngas yields compared to their weighted values from individual pyrolysis. Co-pyrolysis also exhibited superiority in energy recovery with the overall energy efficiency promoted from 42.9% to 48.6%. Deconvolution of synergistic effects revealed that pinewood char catalytically enhanced PC degradation, while the effect of PC char on pinewood pyrolysis was minimal. This article provides results on deconvolved understanding of synergistic effects in co-pyrolysis of lignocellulosic biomass and PC wastes, which is very helpful in designing clean and efficient energy recovery systems from these waste resources.

7 June 2021 in Journal of Energy Resources Technology
Verified
Journal Article
Closed access
PDF file
JLJinhu Li
Jinhu Li
KBKiran G. Burra
Kiran G. Burra
ZWZhiwei Wang
Zhiwei Wang
XLXuan Liu
Xuan Liu
AGAshwani K. Gupta
Ashwani K. Gupta

13 December 2023 in Journal of Energy Resources Technology
Verified
Journal Article
Closed access
PDF file
XYXinhao Ye
Xinhao Ye
JLJinhu Li
Jinhu Li
WLWei Lu
Wei Lu
XLXuan Liu
Xuan Liu
ZWZhiwei Wang
Zhiwei Wang
CLChisen Liang
Chisen Liang

27 June 2022 in Journal of Energy Resources Technology
Verified
Journal Article
Closed access
PDF file
QCQin Cao
Qin Cao
WLWei Lu
Wei Lu
JLJinhu Li
Jinhu Li
KBKiran G. Burra
Kiran G. Burra
AGAshwani K. Gupta
Ashwani K. Gupta

25 May 2022 in Combustion Science and Technology
Verified
Journal Article
Closed access
JGJingjuan Geng
Jingjuan Geng
JLJinhu Li
Jinhu Li
YYYongliang Yang
Yongliang Yang
ZLZenghua Li
Zenghua Li
WPWei PENG
Wei PENG
Decomposition of oxygen-containing functional groups simultaneously produces CO and CO2, accompanied by the generation of active sites. Two different methods were applied in the study to speculate the kinetics of gas generation and the formation of active sites in coal pyrolysis. The evolution of CO and CO2 gas generation during isothermal pyrolysis under different temperatures was first analyzed, and the generation of CO and CO2 in the pyrolysis process was divided into three stages: the rapid decline stage, slow decline stage, and stabilization stage. In the early stage of the pyrolysis reaction, functional groups exhibited a rapid decomposition rate and a high conversion rate ( a), which rapidly decreased the gas concentrations. With increasing pyrolysis time, the decomposition of functional groups declined with a low conversion rate ( a) and showed a steady reaction rate in the later stage. On this basis, a method to calculate the activation energy during pyrolysis based on the data of gases generated in a steady period with a continuous cooling temperature was proposed. Activation energies of 70.12–148.39 kJ/mol for the CO formation and 64.47–127.38 kJ/mol for the CO2 formation were obtained from four different coals. In addition, a thermogravimetric analyzer was used to explore the apparent activation energies in the decomposition process via Coats-Redfern (C-R) method; activation energies of 39.33–126.65 kJ/mol and pre-exponential factors of 1.31–5.15E+08 s−1 were obtained for different coals. The results revealed that the CO had a greater generation activation energy than CO2, and a higher metamorphism degree implies a higher decomposition activation energy, which indicates that the decomposition of carboxyl groups and low-rank coals result in higher active sites.