This study aimed to investigate the impact of UV treatment on the surface functionality and adsorption capacity of biochar, with the goal of enhancing its effectiveness as an adsorbent for toluene. The surface and near-surface functionality and structure of biochar were studied to evaluate the impact of UV treatment by utilizing X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) techniques. Biochar was generated by pyrolyzing wood chips at 900 °C without any oxidant injection in order to increase their carbon content. To boost biochar’s adsorption capability, UV irradiation on the biochar is utilized before and during the penetration process. Toluene was selected as the target absorbing material. The equilibrium adsorption capacity and rate were simulated using the Wheeler equation. It was found that the adsorption capacity of biochar increased significantly after pretreatment with ultraviolet light irradiation with a wavelength of 254 nm and an intensity of 280 μW/cm2 and reached a saturated state after 15 h. SEM and XPS showed that the UV-biochar modification technology not only improved the pore structure of biochar, but also increased the content of -O-containing functional groups on the surface of biochar and improved the adsorption capacity of biochar. The experimental results for sample M50_Uu demonstrated significant improvement in adsorption performance. The adsorption saturation time increased by 80%, and the equilibrium adsorption capacity rose from 12.80 mg/g to 54.60 mg/g. The main reason for the adsorption capacity increase by UV treatment is functional group formation, of which rate linearly increases with pretreatment energy until 11 W·hr/gbiochar, after which the increase rate is slow.
Ammonia combustion has garnered increasing attention due to its potential as a carbon-free fuel. Globally swirling flow in a rectangular furnace generates flameless conditions by high flue gas recirculation. The reverse air injection (RAI) technique enabled stable swirling flameless combustion of pure ammonia without auxiliary methods. Experiments with pure ammonia combustion in a swirling flameless furnace demonstrated an operable equivalence ratio (ER) range of 0.3–1.05, extending conventional flammability limits of pure ammonia as a fuel. NO emissions were reduced by 40% compared to conventional combustion, with peak concentrations of 1245 ppm at ER = 0.71 and near-zero emissions at ER = 1.05. Notably, flameless combustion exhibited lower temperature sensitivity in NO formation; however, the ER has a serious effect. Developing a simplified reaction model for ammonia combustion is crucial for computational fluid dynamics (CFD) research. A reduced kinetic mechanism comprising 36 reactions and 16 chemical species was introduced, specifically designed for efficient and precise modeling of pure ammonia flameless combustion. Combustion simulation using the eddy dissipation concept (EDC) approach confirmed the mechanism’s predictive capability, maintaining acceptable accuracy across the operating conditions.