This article seeks to highlight the vanished and not-so-well-known material culture of historical southern Moroccan Jewry. Jewish settlements could be found practically in the whole of North Africa before the Second World War; however, afterwards, it almost completely disappeared due to the political changes in the region and the establishment of the state of Israel. In southern Morocco, the last Jewish communities were present until the 1950s. Thanks to the interest of the Moroccan authorities, an effort has been made to restore some monuments and keep them as part of the cultural heritage that has attracted foreign tourists for the last few years. As part of the expeditionary research of Charles University and the Czech Technical University in Prague, several documentation projects were carried out in 2020, some of the results of which are described in this paper. Modern automatic methods of geomatics, such as easy to use laser scanning, mobile laser scanning in PLS modification (personal laser scanning), and close-range photogrammetry were used. The results of documentation were processed in the form of 3D models and basic plans, which are used mainly for analyzing residential zones of the Jewish population, the so-called mellahs. In this article, two case projects are described. In both cases, all the mentioned documentation methods were used. The technologies used were analyzed in terms of data collection speed, price, transport, and possible difficulties in use. The PLS technology is relatively new and still under development, such as miniaturising of other measuring instruments. Accuracy testing and usability of above-mentioned technology in cultural heritage documentation real practice is the benefit of this research. Finally, a second aim was to provide information of abandoned cultural places and constructions, which are on the edge of interest and endangered by destruction. It clearly shows that PLS technology is very fast and suitable for these types of objects.

Currently, satellite images can be used to document historical or archaeological sites in areas that are distant, dangerous, or expensive to visit, and they can be used instead of basic fieldwork in several cases. Nowadays, they have final resolution on 35–50 cm, which can be limited for searching of fine structures. Results using the analysis of very high resolution (VHR) satellite data and super resolution data from drone on an object nearby Palpa, Peru are discussed in this article. This study is a part of Nasca project focused on using satellite data for documentation and the analysis of the famous geoglyphs in Peru near Palpa and Nasca, and partially on the documentation of other historical objects. The use of drone shows advantages of this technology to achieve high resolution object documentation and analysis, which provide new details. The documented site was the “Pista” geoglyph. Discovering of unknown geoglyphs (a bird, a guinea pig, and other small drawings) was quite significant in the area of the well-known geoglyph. The new data shows many other details, unseen from the surface or from the satellite imagery, and provides the basis for updating current knowledge and theories about the use and construction of geoglyphs.

AUTOMATIC CLASSIFICATION OF POINT CLOUDS FOR HIGHWAY DOCUMENTATION

Historic object analysis and the knowledge of composition play an important role in restoration processes. Based on this information, restoration works are conducted. This paper introduces a non-invasive technique of plaster and mortar material decomposition using reflectance spectroscopy. For this purpose, a NIRQuest512-2,5 from Ocean Optics^®/Ocean Insight^®, is used to create a unique spectral library consisting of various materials. They were carefully selected to include those that were and still are commonly used for a plaster and mortar production. Each material of the spectral library was mapped in detail, verified using scanning electronic microscope (SEM) data, and the results were compared to a previously determined spectral signature. The new spectral library was then tested on 11 unknown plaster and mortar samples and verified using a scanning electronic microscope. It was found that reflectance spectroscopy provides a powerful tool for plaster and mortar material decomposition, although at the moment it cannot fully replace invasive techniques like chemical analyses or other invasive techniques. It provides relevant information that can be used for restoration works.

Glaciers are an important part of Earth´s surface and play an important role in oceanology and climatology. Nowadays, in a changing climate it is necessary to monitor a glacier’s stay. For a large glacier area, satellite data is used, and for small areas or important parts of a glacier, other techniques can be used. It means, for example, photogrammetry, GNSS or the new RPAS (remotely piloted aircraft system) technology. RPAS measurements should be focused on the movement of a glaciers face. In this project, two different RPAS types (winged drone and multicopter) were tested in Greenland and in Iceland during the last two years. The second technology used for glacier movement detection was satellite images – in this case SAR and InSAR measurement. Satellite data were tested on an inland glacier area and the movement was based on the installation of four corner reflectors directly on a monitored area in western Greenland. TerraSAR-X data were used. First, four acquisitions were performed in 2015, directly after corner reflector installation, then two acquisitions in 2017. The project experience and results are discussed in this paper.

This contribution focuses on a comparison of modern geomatics technologies for the derivation of growth parameters in forest management. The present text summarizes the results of our measurements over the last five years. As a case project, a mountain spruce forest with planned forest logging was selected. In this locality, terrestrial laser scanning (TLS) and terrestrial and drone close-range photogrammetry were experimentally used, as was the use of PLS mobile technology (personal laser scanning) and ALS (aerial laser scanning). Results from the data joining, usability, and economics of all technologies for forest management and ecology were discussed. ALS is expensive for small areas and the results were not suitable for a detailed parameter derivation. The RPAS (remotely piloted aircraft systems, known as “drones”) method of data acquisition combines the benefits of close-range and aerial photogrammetry. If the approximate height and number of the trees are known, one can approximately calculate the extracted cubage of wood mass before forest logging. The use of conventional terrestrial close-range photogrammetry and TLS proved to be inappropriate and practically unusable in our case, and also in standard forestry practice after consultation with forestry workers. On the other hand, the use of PLS is very simple and allows you to quickly define ordered parameters and further calculate, for example, the cubic volume of wood stockpiles. The results from our research into forestry show that drones can be used to estimate quantities (wood cubature) and inspect the health status of spruce forests, However, PLS seems, nowadays, to be the best solution in forest management for deriving forest parameters. Our results are mainly oriented to practice and in no way diminish the general research in this area.