Background: Plantar pressure distribution is a valuable tool for studying how the ground reaction forces are transmitted from the feet to the body and for detecting abnormalities in foot biomechanics. Objectives: The objective of this study was to determine the effect of the foot type (normal foot, flatfoot, and cavus foot) on plantar pressure distribution in healthy Mexican men and women aged from 3 to 74 years. Methods: A database of the plantar pressure distribution under dynamic and static conditions for both feet was studied using descriptive statistics, regression analysis, and statistical factorial design. The database contained images of the soles of the feet and pressure distribution of 996 persons between 3 and 74 years old (53.9% females and 46.1% males). Two different conditions were evaluated; the first was in a static condition, and the second was during walking. The Chippaux–Smirak Index (CSI) was used to classify the type of feet. Results: In the left foot, a linear regression analysis of the soles of the feet shows that the prevalence of flatfoot (p-value = 3.45 × E−5) decreased with age, while the normal foot (p-value = 7.39 × E−5) increased. When people are standing (static), the hindfoot (55.64 ± 18.80%) presents more pressure than the forefoot (45.18 ± 19.50%), while in dynamic, the forefoot (55.95 ± 13.36%) supports more pressure than the hindfoot (44.05 ± 13.36%). Similar behavior occurs in the right foot. A statistical factorial design ANOVA shows that the plantar pressure in the forefoot and hindfoot regions is significantly different (p < 0.05). Conclusions: The prevalence of flatfoot decreased with age, while the proportion of normal foot type increased. Under static conditions, the hindfoot bore more load than the forefoot, whereas under dynamic conditions, the forefoot bore more load than the hindfoot. This research contributes to generating a comprehensive database of reference values of the plantar pressure of different foot types in a Mexican population; this will be useful to podiatrists, clinicians, and physiotherapists for the analysis or treatment of abnormal foot postures.
1 May 2023 in Revista Mexicana de Ingeniería Biomédica
The objective of this study was to analyze the footprint morphology and obtain the Chippaux-Smirak Index in a Mexican population to identify the type of feet and its prevalence. A database of images of the soles of both feet was analyzed. The database contained images of 1,014 persons between 2 and 73 years old from Guanajuato state, Mexico. Moreover, a literature review was performed to identify the type of feet in the Mexican population. It was observed that less than 17 % of the population have cavus foot (p= 0.018). Furthermore, less than 25 % of the population between 17 and 73 years have flatfoot 3 (p= 0.0079) in the left foot. Also, only nine articles related to the type of foot in the Mexican population were found, but most of them were performed on young population. The formation of the medial arc could be beyond the first decade of life and the relatively high prevalence of flatfoot in adult life should be studied. Finally, the results found can be useful for orthopedists, physiotherapists, clinicians, and parents who are concerned about the foot health of their children.
The kinematic assessment of the upper limbs in breast cancer (BC) survivors is one of the most common procedures to determine the recovery process after BC surgery. However, the methodology used is heterogeneous, finding various evaluation methods, which makes it difficult to compare results between studies. The objective of this review was to identify the technical features of the kinematic evaluation methods used in patients with mastectomy for BC. A literature review was conducted to search in electronic databases, such as PubMed, ScienceDirect, Clinical Key, Google Scholar, and Scopus. A total of 641 articles were obtained. After screening the title and the summary of the investigations, 20 manuscripts were kept for a deeper analysis. Different methodologies were found for the analysis of the kinematics of the upper limbs. Eight (40%) articles used the optoelectronic system, nine (45%) used the electromagnetic system, and three (15%) used other optoelectronic systems to assess shoulder kinematics. Each investigation studied different variables such as the type of surgery, the evaluation time, the age of the patients, the rehabilitation protocol, and so on. This makes the comparison among studies difficult, and the recovery process of the patients cannot be easily determined. In conclusion, the interpretation of the movement of the upper limbs should be easy to understand for oncologists, physiotherapists, clinicians, and researchers.
Background/Objectives: Previous studies have shown that excess body weight influences plantar pressure. However, the specific impact of Body Mass Index (BMI) on dynamic pressure distribution during different phases of walking, as well as its effect on load symmetry between the feet, requires further investigation. This study aimed to evaluate the effects of varying BMI categories on dynamic plantar pressure, spatiotemporal gait parameters, and load symmetry. Methods: A retrospective analysis of pre-existing records from 300 adults (2017–2025) classified as normal weight, overweight, and obese was conducted. Dynamic plantar pressure, contact time, and gait speed across four stance phases were assessed using baropodometric platforms. Bilateral differences were evaluated via the symmetry index (SI). Results: Overweight and obese individuals exhibited higher plantar pressures and prolonged contact times, particularly during the forefoot contact phase (FFCP) ( < 0.001). Gait speed decreased inversely with BMI across all phases. Despite these kinematic adaptations, BMI-related load asymmetry occurred only during the initial contact phase (ICP) ( < 0.001), restoring stability in subsequent phases. Conclusions: Excess body mass is associated with targeted mechanical overload of the forefoot rather than uniform stress across the foot. To manage inertia and maintain symmetry, individuals with high BMI may adopt spatiotemporal strategies that reduce speed and extend double support, potentially prioritizing stability over propulsive efficiency. These findings suggest that orthotic interventions for individuals with high BMI may benefit from prioritizing forefoot offloading, although prospective studies are needed.
Plantar orthoses are devices designed to provide support and correct the biomechanics of the foot. Generative design offers ample potential for personalization; however, the analysis of its structural behavior continues to be a significant challenge. This research aims to evaluate the structural optimization of orthoses designed by generative design compared to traditional models. An analysis of 33 middle-aged adult men classified as normal weight, with an average weight of 65.32 ± 6.79 kg, was performed using a baropodometric database. An optimized orthosis was designed by parametric modeling to evaluate its mechanical response in static standing conditions, using the finite element method with the TPU A95 material. The results indicated that the trabecular structures produced by generative design absorb more energy (0.3876 J) than a bilaminated orthosis made with EVA A40 and A15 materials (0.0362 J). The levels of deformation obtained (maximum principal strain = 1.34%, equivalent elastic strain = 2.14%) indicate that the composition of the generative model works well within the elastic regime, ensuring structural integrity. However, the low strain and strain energy values suggest relatively rigid behavior, which can limit the shock absorption capacity. The main contribution of this work is to demonstrate how generative design can be integrated into methodologies for designing plantar orthotics. It explores the potential benefits of this approach and examines how generative design parameters influence mechanical responses. This research provides a technical foundation for optimizing ergonomic orthoses through generative design and structural modeling. The findings emphasize the potential of generative design in creating optimized orthoses and highlight the significance of design parameters on the outcomes achieved. This insight is valuable for future applications of generative design in the field of ergonomics.
1 May 2023 in Dilemas Contemporáneos: Educación, Política y Valores
En este trabajo se presenta una propuesta de diseño conceptual de dispositivo de rehabilitación pulmonar para pacientes recuperados de COVID-19 con sintomatología leve y moderada y con afecciones en su vida diaria. La propuesta de diseño consta de cuatro sistemas: uno de control y monitoreo, otro sistema de restricción de respiración torácica, un sistema inhibidor de movimiento clavicular y un sistema de vibración.