Studies have shown that the relative sliding speed of the silicon-based material surface has an effect on its friction behavior. In this study, the molecular dynamics method was used to simulate the sliding of the SiO2 surface at different speeds. This is to explore the internal mechanism between SiO2 surface friction behavior and the relative sliding speed. First of all, this study constructed a 3D model of the SiO2 friction surface and simulated the sliding process under two different environments of absolute dryness and full wetness. Then, the sliding of the SiO2 surface at different speeds in dry and wet environments is simulated and verified the rationality of the simulation through experiments. The final results show that the lattice distortion and tribochemical reactions that occur on the SiO2 surface of the material have varying degrees of influence on the friction behavior of the material surface. In the dry environment, the coefficient of friction of the SiO2 surface increases with the speed. On the contrary, in the humid environment, the SiO2 surface decreases as the speed increases. The analysis results found that the speed has varying degrees of influence on the lattice distortion and tribochemical reaction of the SiO2 surface. Eventually, this study quantifies the effect of speed on SiO2 surface tribochemical reactions and lattice distortion in two different environments.
Digital microfluidic platforms have been extensively studied in biology. However, achieving efficient mixing of macromolecules in microscale, low Reynolds number fluids remains a major challenge. To address this challenge, this study presents a novel design solution based on dielectric electro-wetting (EWOD) by optimizing the geometry of the transport electrode. The new design integrates micro-barriers on the electrodes to generate vortex currents that promote mixing during droplet transport. This design solution requires only two activation signals, minimizing the number of pins required. The mixing performance of the new design was evaluated by analyzing the degree of mixing inside the droplet and quantifying the motion of the internal particles. In addition, the rapid mixing capability of the new platform was demonstrated by successfully mixing the sorbitol solution with the detection solution and detecting the resulting reaction products. The experimental results show that the transfer electrode with a micro-barrier enables rapid mixing of liquids with a six-fold increase in mixing efficiency, making it ideal for the development of EWOD devices.