In order to deeply explore the high-temperature cyclic characteristics of the FGH96 superalloy under different strain amplitudes, the high-temperature low-cycle fatigue behavior of the FGH96 superalloy was analyzed from the perspective of internal stress evolution. Four sets of strain amplitude (0.5%, 0.6%, 0.8%, and 1.2%) controlled high-temperature low-cycle fatigue tests were carried out on the FGH96 superalloy at 550 °C, and the internal stress was divided into back stress and effective stress through the cyclic stress-strain curves. The results show that the cyclic softening/hardening characteristics of the FGH96 superalloy under different strain amplitudes are closely related to the evolution of internal stress. The strain amplitude has a significant effect on the back stress of the FGH96 superalloy but has little effect on effective stress. At low strain amplitudes (0.5% and 0.6%), the back stress evolution rate of the FGH96 superalloy is lower than effective stress, and the material mainly exhibits cyclic softening. At high strain amplitudes (0.8% and 1.2%), the back stress evolution rate of the FGH96 superalloy is significantly higher than effective stress, and the material exhibits cyclic hardening. The combined effect of back stress and effective stress is the main reason for the different low-cycle fatigue behaviors of the FGH96 superalloy under different strain amplitudes.
Strain-controlled low-cycle fatigue (LCF) tests and stress-controlled creep-fatigue interaction (CFI) tests on the FGH96 superalloy were carried out at 550 °C to obtain the cyclic softening/hardening characteristics at different strain amplitudes and ratcheting strain characteristics under different hold time. The failure mechanism of the FGH96 superalloy under different loading conditions was analyzed through fracture observations. The results show that the FGH96 superalloy exhibits different cyclic softening/hardening characteristics at different strain amplitudes, and the introduction of the hold time at peak stress exacerbates the ratcheting strain of the FGH96 superalloy under asymmetric stress cycles. Fracture observations show that the magnitude of the strain amplitude, high-temperature oxidation, and the introduction of the hold time will affect the mechanical properties of the FGH96 superalloy and change its fracture mode.
A low bypass ratio turbofan engine operates in a hostile environment, resulting in performance degradation. This seriously affects the security and reliability of the engine. Therefore, a performance degradation evaluation method for engines based on flight data is proposed. The method expands the equation system to solve the underdetermined problem caused by the lack of engine sensors based on multiple operating point analysis. The improved evolution algorithm is employed to solve the equation system, which relieves the problem of insufficient precision. The engine performance degradation dataset is established based on the engine performance calculation model to verify the reliability of the degradation evaluation method. The results show that the method is applicable to the dataset. Finally, the method is applied to the actual flight data to study the law of the performance degradation of the researched engine, which indicates that the engine’s fan efficiency and high-pressure compressor flow capacity have an apparent downward trend over time.