Industrial hemp (Cannabis sativa L.) is traditionally processed for its high fibre content in the textile industry, but in recent years, it has come to constitute a new raw material in the food industry. Hemp seeds, but also the seed meal, are rich in protein (25%) and oil (30%), the latter consisting of 80–90% of unsaturated fatty acids; they represent a rich and balanced nutritional source to replace the classic animal sources, and they are used in the food industry to supply new food trends. In this work, the hemp oil extraction process was studied, taking advantage of the supercritical CO2 and ultrasounds, and comparing it with the exhaustive Soxhlet technique. The residual cake from extraction is a protein-rich waste that can be used for food formulations. From this perspective, the hemp oil extracted was used to formulate emulsions with the consistency of vegetable drinks, enriched with standard hemp protein isolate and stabilized with the addition of 0.05% w/w of thickening polysaccharides (Gellan gum). The formulated emulsion is stable, and this can encourage the process improvement and the use of the waste from hemp seed extraction for the valorisation of by-products and waste to obtain complete food products with high nutritional value.
Traditional wound dressings may lack suitability for diverse wound types and individual patient requirements. In this context, this study aimed to innovate wound care by developing a 3D-printed patch using alginate and pectin and incorporating Olive Leaf Extract (OLE) as an active ingredient. Different polymer-to-plasticizer ratios were systematically examined to formulate a printable ink with optimal viscosity. The resultant film, enriched with OLE, exhibited a substantial polyphenolic content of 13.15 ± 0.41 mg CAE/g, showcasing significant antioxidant and anti-inflammatory properties. Notably, the film demonstrated potent scavenging abilities against DPPH, ABTS, and NO radicals, with IC50 values of 0.66 ± 0.07, 0.47 ± 0.04, and 2.02 ± 0.14 mg/mL, respectively. In vitro release and diffusion studies were carried out and the release profiles revealed an almost complete release of polyphenols from the patch within 48 h. Additionally, the fabricated film exhibited the capacity to enhance cell motility and accelerate wound healing, evidenced by increased collagen I expression in BJ fibroblast cells. Structural assessments affirmed the ability of the patch to absorb exudates and maintain the optimal moisture balance, while biocompatibility studies underscored its suitability for biomedical applications. These compelling findings endorse the potential application of the developed film in advanced wound care, with the prospect of tailoring patches to individual patient needs.
(1) Background: Recent research on the valorization of agro-industrial waste has attempted to obtain new products. Grape residue is a waste product used in the grape wine industry that is rich in anthocyanins, as well as leaves and waste parts from red cabbage processing. Anthocyanins, thanks to their various functionalities, can be recovered and used as active and intelligent agents in food packaging. Anthocyanins have antioxidant properties that help to prevent cardiovascular disease. (2) Methods: In this study, the process of extracting waste was studied using solvent and supercritical CO2 extraction. The obtained anthocyanins were used in starch-based food film formulations. Several formulations were studied using rheometric techniques and the effect of adding anthocyanins on optimal film formulation was investigated. (3) Results: Solvent extractions resulted in a maximum extraction yield. The extracts obtained were used for the preparation of coating and edible films, optimized in the formulation. (4) Conclusions: The addition of anthocyanins to films resulted in increased sample structuring and mechanical properties that are valid for applications, like dipping using coverage methods. The packaging is also attractive and pH-sensitive.
Emulgels are biphasic emulsified systems in which the continuous phase is structured with a specific gelling agent. In this work, a rheological and microscopic investigation of O/W emulgels prepared by structuring the aqueous (continuous) phase with citrus fiber was carried out with the aim of designing their macroscopic properties for food uses and predicting their characteristics with a rheological model. According to previous investigations, fiber suspensions behave as “particle gels” and, consequently, the derived emulgels’ properties are strongly dependent on the fiber concentration and on process conditions adopted to produce them. Therefore, a rotor–stator system was used to prepare emulgels with increasing fiber content and with different levels of energy and power used for mixing delivered to the materials. An investigation of particle gels was then carried out, fixing the operating process conditions according to emulgel results. Furthermore, the effect of the dispersed (oil) phase volume fraction was varied and a modified semi-empirical Palierne model was proposed with the aim of optimizing a correlation between rheological properties and formulation parameters, fixing the process conditions.
Background: Hypertension affects 32% of adults worldwide, leading to a significant global consumption of cardiovascular medications. Atenolol, a β-adrenergic receptor blocker, is widely prescribed for cardiovascular diseases such as hypertension, angina pectoris, and myocardial infarction. According to the Biopharmaceutics Classification System (BCS), atenolol belongs to Class III, characterized by high solubility but low permeability. Currently, atenolol is commercially available in oral formulations. Increasing attention is being directed towards developing cost-effective transdermal delivery systems, due to their ease of use and better patient compliance. Eutectogels represent next-generation systems that are attracting great interest in the scientific community. Typically obtained from deep eutectic solvents (DESs) combined with gelling agents, these systems exhibit unique properties due to the intrinsic characteristics of DESs. Methods: In this study, a DES based on choline chloride as a hydrogen bond acceptor (HBA) and propylene glycol as a hydrogen bond donor (HBD) was explored to enhance the topical delivery of atenolol. The solubility of atenolol in the DES was evaluated using spectroscopic and thermodynamic measurements which confirmed the formation of hydrogen bonds between the drug and DES components. Additionally, the safety of the DES was assessed in a cell viability assay. Subsequently, we formulated eutectogels with different concentrations using animal gelatin and Tego Carbomer 140, and characterized these formulations through rheological measurements, swelling percentage, and permeation studies with Franz cells. Results: These novel eutectogels exhibit superior performance over conventional hydrogels, with a release rate of approximately 86% and 51% for Carbomer- and gelatin-based eutectogels, respectively. In contrast, comparable hydrogels released only about 27% and 35%. Conclusions: These findings underscore the promising potential of eutectogels for the transdermal delivery of atenolol.
Colloidal food products, such as emulsions, foams, gels, and dispersions, are complex systems that need the presence of stabilizing agents to enable their formation and provide stability. Proteins are often used for food foams and emulsions because of their ability to lower interfacial tension and make viscoelastic interfaces. Generally, to improve the resistance against rupture, polysaccharides are used in association with the proteins. Pectin is a complex polysaccharide that can help to stabilize foams or emulsions. This work aims at studying the mechanical resistance of the interface formed by mixtures of β-casein and pectin at high and low methoxylation degrees at the air/water interface using dilatational and shear kinematics. Frequency sweep tests, in the linear region, were performed in shear at different aging times and in dilatational mode, and the rheological data were analyzed. The transient data of the surface tension were analyzed by kinetic models to obtain the characteristic rates of the interfacial phenomena. The kinetic mechanisms of the protein/pectin mixed systems are controlled by protein and show a weak gel behavior for short aging times. The interfaces obtained with both pectins in a mixture with β-casein evolved with time, gelling and showing a solid-like behavior at concentrations of 1 and 10 g/L and after 3.5 h of aging time. The interfacial shear trend obtained suggests a good stabilizing effect of the pectins from citrus with long aging times.