Lattice structures play a key role in influencing the mechanical and thermal properties of many applications. Knowing the importance of lattice structure and its influence on mechanical and thermal properties, this article discussed the triply periodic minimal surface-based gyroid shapes, their design, manufacturability, and difficulties while printing with the additive manufacturing process. This review also emphasizes the impact of changing the structure and additive manufacturing process parameters like porosity, wall thickness, unit cell size, infill, and gradient ratio on the mechanical and thermal properties of the printed parts. This study discussed the advantages and disadvantages of replacing conventional structures with bio-inspired gyroid structures and their effects on mechanical and thermal properties. This review also brought a comparative study between gyroid and other existing lattice structures in terms of mechanical and thermal properties and suggestions are been made to use gyroid shapes compared to existing lattice structures for improved thermal mechanical for different applications like biomedical, structural, and heat transfer fields. In this review article, a multitude of research areas could help the researcher to easily decide the appropriate application-based gyroid structure.
17 February 2023 in Materials Today Communications
Environmental noise pollution is exacerbated by accelerated urbanization and different sources generate a unique sound spectrum. To address the aforementioned issue, triply periodic minimal surface acoustic absorbers were additively manufactured with three geometrical parameters (porosity, sample thickness, and wall thickness) patterns to absorb sound across a wide range of frequencies. TPMS absorbers made from Abs resin were manufactured using VAT polymerization additive manufacturing (SLA) technology. The acoustic properties of these absorbers were evaluated using the impedance tube technique across a frequency range of 100-6400 Hz and discussed. The four TPMS absorbers exhibit slight variations in density as a result of their distinct unit cell sizes, which are necessary to uphold constant porosity levels. This study found multiple parameters, especially the nature of the surfaces, porosity ranges, sample thicknesses, and wall thickness of the tested sound-absorbing TPMS 3D printed structure, significantly impacted the sound absorption performance. At the ideal process parameters of 80% lattice porosity, 60 mm sample thickness, and 0.8 mm wall thickness, the gyroid lattice obtained a peak sound absorption coefficient of 0.945, a noise reduction coefficient of 0.50, and an average sound absorption of 0.575. The suggested 3D-printed TPMS acoustic absorbers, inspired by nature, can be placed on construction walls or transportation applications, depending on the desired acoustic absorption range.
30 September 2025 in Progress in Additive Manufacturing
Nature-inspired triply periodic minimal surface (TPMS) lattices serve as exemplary models for advanced thermal management strategies. Their intricate geometric and topological configurations enhance surface area, porosity, and smooth curved walls, optimizing thermal performance across diverse applications. These attributes render TPMS structures exceptionally effective in augmenting heat sink performance within a constrained volume, outperforming conventional designs such as pin fin heat sinks. The present study evaluates the thermal performance of five L-PBF manufactured TPMS heat sinks (Gyroid, Diamond, Schwarz, Lidinoid, and Split P) relative to conventional pin–fin heat sinks of equivalent volume. The investigation focuses on the effect of unit cell sizes and periodicity on thermal performance, providing deeper insights into heat transfer mechanisms in TPMS-based structures. To accurately replicate the thermal characteristics, both numerical simulations and experimental testing were conducted. A customized testing system was developed to assess A20X aluminum heat sinks, revealing uniform heat flow across the lattice samples. Overall, this study indicates potential for improved heat transfer and validates the superior performance of TPMS heat sinks over traditional designs.
10 September 2023 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Additive manufacturing is spreading rapidly because it offers great design freedom in creating intricate lightweight shapes using lattice structures that offer numerous possibilities, including applications in aerospace, automotive, and electronics where mechanical properties are paramount. In this paper, inspired by the wing scale of the C. Rubi butterfly, unique uniform and density-graded gyroid lattice structures were proposed. This research designed the uniform gyroid lattice structure with two design configurations of unit cell sizes (4, 6, and 8) and solidity percentages (20, 30, 40, and 50) and density-graded gyroid with a solidity range of 20–80% in a constant volume of 30*30*30 mm. The designs have been modeled in nTopology software and manufactured using the Vat polymerization additive manufacturing technique with two printing orientations (0° and 25°). Two sets of the samples were printed, and one group was given postcuring treatment at 80°C for 2 hours. Quasi-static compression testing was performed to investigate the improvement in mechanical characteristics due to postcuring treatment and print orientation. The results indicate significant relationships between design parameters and mechanical performance. The density-graded gyroid lattice exhibits four times higher compressive strength than higher solidity uniform gyroid samples (UC-8-solidity-40 and 50%) when subjected to the same or less mass. In addition, debonding of connecting surfaces due to higher postcuring temperature, and better performance of horizontally printed samples have been addressed. Moreover, simulation and experimental deformation patterns for uniform and graded gyroid lattice structures have been displayed.