Construction projects are implemented in different countries with heavy costs and some of the projects have been relatively or absolutely unsuccessful and even faced with irreversible losses after construction. Maybe, it is due to complexities related to projects or other social-economic phenomenon. The present study revealed that value engineering can be used as a helpful tool from the beginning of studies to the end of designing, constructing, exploiting, and maintaining processes and overcome civil designs' challenges and complexities. Value engineering is a method experienced in management that has an organized approach. Value engineering has a systematic and cooperative mechanism to analyze function and systems with the aim of achieving desirable function with the least costs. This study has attempted to briefly introduce concepts and executive process of value engineering in construction projects. Also, the study has attempted to investigate conventional methods of evaluating projects function and compare them convergence with value engineering to improve projects. Based on the research findings, it can be found that if we can expect to achieve projects objectives by spending the least cost and ensure the efficacy of investment in construction projects management sector as a main challenge of development plans in the third world countries through using engineering in appropriate time periods and in different phases.

In recent years, tapping the sea for potable water has gained prominence as a potential source of water. Since seawater intake systems are often used in the infrastructure industry, ensuring proper efficiency in different operating conditions is very important. In this paper, CFD modeling is used to show general hydraulic design (flow patterns, stream flow, vortex severities, and pre-swirl) principles and performance acceptability criteria for pump intakes in different conditions. The authors explore scenarios for avoiding or resolving hydraulic problems that have arisen as a result of hydraulic model studies. The results show that the designer should make every effort to avoid small entrance and filtration areas from the basin to the intake forebay bottom, which could result in jet outlet and/or supercritical flow; too small logs at the basin outflow, which could result in high velocity flow jets; and sudden area contractions at the forebay to pump bay junction. There should be enough submergence at the pumps to reduce harmful vortex severities and pre-swirl. Curtain walls, baffles, fillets, and splitters, as well as flow redistributors, can all aid in improving approach flow patterns. Reduced flow separations and eddies will be greatly assisted by rounding corners and providing guide walls. Using a numerical model to figure out what is wrong and how to fix it will help the facility’s costs and maintenance decrease in the long run.

Bottom outlets are significant structures of dams, which are responsible for controlling the flow rate, operation, or removal of reservoir sedimentation. The service gate controls the outlet flow rate, and whenever this gate is out of order, the emergency gate which is located at upstream is utilized. The cavitation phenomenon is one of the common bottom outlets’ problems due to the rapid flow transfer. The present research is a numerical study of the flow pattern in a dam’s bottom outlet for different gate openings by the use of Flow‐3D software and RNG k-ε turbulence model. The investigation is carried out on the Sardab Dam, an earth dam in Isfahan (Iran). The maximum velocity for 100% opening of the gate and Howell Bunger valve is about 18 m/s in the section below the gate, and the maximum velocity for 40% opening of the gate is equal to 23.1 m/s. For 50% opening of the service and emergency gate in the valve’s upstream areas, the desired pressure values are reduced. Moreover, in the areas between the two emergency and service gates, the pressure values are reduced. The possibility of cavitation in this area can be reduced by installing aerators. The flow pattern in Sardab Dam’s bottom outlet has relatively stable and proper conditions, and there are no troublesome hydraulic phenomena such as local vortices, undesirable variations in pressure, and velocity in the tunnel, and there is no flow separation in the critical area of flow entering into the branch.