Environmental benefits lie in halting direct air pollution and reducing greenhouse gas emissions. In contrast to thermal vehicles, electric vehicles (EV) have zero tailpipe emissions, but their contribution in reducing global air pollution is highly dependent on the energy source they have been charged with. Thus, the energy system depicted in this paper is a photovoltaic (PV)-powered EV charging station based on a DC microgrid and includes stationary storage and public grid connection as power source backups. The goal is to identify the preliminary requirements and feasibility conditions for PV-powered EV charging stations leading to PV benefits growth. Simulation results of different scenarios prove that slow charging with long park time could increase PV benefits for EVs and may reduce the charging price, therefore, EV users should be more willing to stay at charging stations. Whereas, for fast charging, EV users should accept the high charging price since it depends on the public energy grid. Energy system distribution and EV’s energy distribution are well presented.
Recently, the lift off point for the sales of electric vehicle (EV) was started with a significant increase. Therefore, convenient access to charging station infrastructure is required. The purpose of this work is to assess the role and benefits of photovoltaic (PV) for PV-powered charging infrastructures for EVs by a better energy management. This management is performed by a microgrid based on PV panels installed on roofs or car parking shades, EVs charging terminals, electrochemical stationary storage, and public grid connection. The aim is to define the economic aspects, feasibility and preliminary requirements for this system, in order to avoid overloading the power grid and guarantee a higher percentage of clean energy. The proposed methodology is presented through the modeling and development of a techno-economic tool for local stakeholders, allowing to manage and size EV charging stations, which is divided into three phases. The first phase informs local stakeholders on the necessary space and the maximum sizing as well as the generated cost to install a PV-powered charging station (PVCS). During the second phase, the total cost of the PVCS is adjusted according to the users’ budgets and needs. The third phase presents a detailed qualitative analysis of the user-defined configuration. In this phase, the main objective is to assess the performance of the PVCS, and then, to improve its sizing and its operating modes aiming at increasing the use of PV energy, while minimizing energy supplied by the power grid. In addition, it allows evaluating the PVCS performance by proposing an energy balance according to different charging scenarios (virtuous scenario, critical scenario, realistic scenario, and personalized scenario) and weather conditions. Moreover, this tool is reproducible in peri-urban area since it is able to handle any location.
This article proposes a comparative study between different control strategies of a wind energy conversion system. It aims to guarantee a robust control strategy which gives a good performance despite the external disturbances. Studied system comprises a wind turbine, a permanent magnet synchronous generator, and two converters linked by a DC bus. The whole is connected to the grid through a resistor–inductor filter. A classical vector control based on proportional–integral controller is applied to our system. Owing to the sensitivity of this control against external disturbances, a control strategy using first-order sliding mode has been proposed. This strategy provides good performance, such as insensitivity to non-linearity of system. Yet, the theory of first sliding mode has faced the problem of chattering, which proved to be a major drawback. To overcome this problem, a control strategy using sliding mode of higher order was implemented on the basis of the super-twisting algorithm.
This paper presents a hardware implementation upon a Field Programmable Gate Array (FPGA) of improved Vector Control Strategies (VCSs) based on a Fuzzy Logic System (FLS) of a grid-connected wind energy conversion system. Usually, the classical VCS is based on fixed-gain Proportional Integral Derivative (PID) controllers, which are known to exhibit limited performance against the nonlinear behavior of wind systems, such as rapid fluctuations of the wind speed and uncertainties of the system parameters. In order to overcome this limitation, an improved VCS based on Fuzzy Gain Scheduling PID controllers (VCS-FGS-PID) is suggested in this work to guarantee good tracking, high accuracy and good robustness under system parameter variations. Indeed, the PID controller gains are tuned, in real-time, by the FLS. In addition, the proposed VCS-FGS-PID methods are implemented on the FPGA in order to reduce the delays and the period of the system of the control loop, thanks to its parallel processing. In fact, the performance of the suggested VCS-FGS-PID approaches are proved by digital simulation with the Xilinx system generator tool under Matlab/Simulink, in addition to an experimental hardware-in-the-loop implementation using the FPGA. The obtained results demonstrate that the proposed VCS-FGS-PID techniques offer better performance as regards good tracking and high accuracy and good robustness against stator resistance variability compared to VCS-PI.
To deal with the issue of climate change by moving towards sustainable development, electric mobility is one of the most beneficial approaches, offering users relatively low-carbon transport means. Based on a life cycle assessment, this paper investigates a calculation methodology of carbon impact and global cost for a photovoltaic-powered charging station (PVCS) for electric vehicles (EVs). The PVCS is equipped with a PV system, stationary storage, charging terminals, and connection with the power grid. This methodology has two main objectives. The first one is the estimation of the global cost of the PVCS under 30 years of lifespan, including the costs of investment, exploitation, maintenance, and externalities. The second one is the calculation and assessment of the carbon impact of the PVCS and comparing it with a grid-powered charging station (PGCS). According to the analysis of the results obtained, the carbon impact of the PV system is largely responsible for the global carbon impact of PVCS. Thus, levers of action and scenarios are proposed to reduce the global carbon impact by using more recent data and recycled materials for the most emitting elements of CO2. The proposed scenarios allowed a reduction in the carbon impact of the PVCS compared to the PGCS, where scenario 4 has the lowest carbon impact. For recent PV panels having a greatly reduced emission coefficient of 0.012 kgCO2,eq/kWh, and a recycled infrastructure, the PVCS has a 32.1% lower carbon impact than that of the PGCS.
9 May 2024 in Computers and Electrical Engineering