In the laser screen velocity measuring (LSVM) system, there is a deviation in the consistency of the optoelectronic response between the start light screen and the stop light screen. When the projectile passes through the light screen, the projectile’s over-target position, at which the timing pulse of the LSVM system is triggered, deviates from the actual position of the light screen (i.e., the target deviation). Therefore, it brings errors to the measurement of the projectile’s velocity, which has become a bottleneck, affecting the construction of a higher precision optoelectronic velocity measuring system. To solve this problem, this paper proposes a method based on high-speed shadow imaging to measure the projectile’s target deviation, ΔS, when the LSVM system triggers the timing pulse. The infrared pulse laser is collimated by the combination of the aspherical lens to form a parallel laser source that is used as the light source of the system. When the projectile passes through the light screen, the projectile’s over-target signal is processed by the specially designed trigger circuit. It uses the rising and falling edges of this signal to trigger the camera and pulsed laser source, respectively, to ensure that the projectile’s over-target image is adequately exposed. By capturing the images of the light screen of the LSVM system and the over-target projectile separately, this method of image edge detection was used to calculate the target deviation, and this value was used to correct the target distance of the LSVM to improve the accuracy of the measurement of the projectile’s velocity.
This paper proposes a cost-effective, compact, noncontacting optoelectronic targeting system for measuring the distribution of projectile motion. The major elements of this system include a light emitting diode (LED) array, photodiode detecting array, double-layered aperture arrays, adaptive threshold circuit, and date acquisition. Through cooperating with double-layered aperture arrays, the system effectively reduces the radiation width of the light source to the photodiode detecting surface, and filters out the influence of incident light from the adjacent apertures on both sides above each photodiode to the corresponding photodiode detecting surface. It realizes that the response of the photodiode array corresponds to the coordinates of the light screen one by one. Through the sensitivity analysis of the light screen of the system, the system detecting threshold when the projectile passes through the light screen is calculated, and the corresponding adaptive threshold circuit is designed to prevent misjudgment when the system works. The measuring error of the system can reach ±2 mm by experimental verification. Compared with other projectile’s distribution measuring systems, the proposed system has the advantages of having high precision, convenient debugging, is nondestructive, and is a noncontact system.
2 September 2021 in International Journal of Optics
According to the principle of phase-shifting interferometry and spiral phase characteristics of the vortex beam, this article proposes a method for detecting the surface profile of a transparent object, in which the +1 order vortex beam is generated by a spatial light modulator and is taken as the reference light. The influence of the nonlinear phase modulation characteristics of the spatial light modulator on the measurement precision is studied. The results show that nonlinear phase modulation has a great impact on the measurement. Then, the vortex lights with initial phases of 0, π/2, π, and 3π/2 are used to measure the H-type thin film sample based on the Twyman-Green interference system after correcting the nonlinear phase modulation characteristics. The experimental results show that the measurement error of the surface profile to an object with the theoretical value of 20nm is 1.146nm, and the feasibility of the optical vortex phase-shifting technique used to measure the surface profile of an object is verified.
To address the issue of increased heading angle calculation errors in atmospheric polarization navigation caused by occlusions (e.g., buildings and vegetation) in disturbed environments, this study proposes a robust framework integrating a DSCA-Unet (DSC-MCA-Unet) deep neural network with multi-scale image reconstruction. It achieves precise segmentation of the occluded region and high-quality restoration of polarization information. Building upon the Unet architecture, we enhance feature extraction through the Dynamic Snake Convolution (DSC) and Multidimensional Collaborative Attention (MCA), achieving a 3.98% improvement in mean Intersection over Union (MIoU) for complex occlusion segmentation tasks. Multiscale recovery strategy, optimized priority calculation and patch matching mechanism are introduced into the traditional patch algorithm to design a multiscale image reconstruction algorithm, which is used to improve the recovery quality of polarized images. The mask from the DSCA-Unet segmentation is combined with the Angle of E vector (AOE) image containing the anomalous pixels for polarization pattern reconstruction, followed by heading angle calculation using restored polarization data. Simulation and measurement experiments demonstrate the proposed framework successfully eliminates the noise caused by occlusions in the polarization information and accurately restores the abnormal regions. The Mean Absolute Error (MAE) of the corrected course angle reaches 0.88°, representing a 79% reduction compared to the direct computation using corrupted polarization data. This study provides theoretical methods and technical support for solving the reliability problem of atmospheric polarization navigation in complex environments.
For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes’ intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes’ intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the -axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.