A disaster preventive structural health monitoring (SHM) system needs to be equipped with the following abilities: First, it should be able to simultaneously measure diverse types of data (e.g., displacement, velocity, acceleration, strain, load, temperature, humidity, etc.) for accurate diagnosis. Second, it also requires standalone power supply to guarantee its immediate response in crisis (e.g., sudden interruption of normal AC power in disaster situations). Furthermore, it should be capable of prompt processing and realtime wireless communication of a huge amount of data. Therefore, this study is aimed at developing a wireless unified-maintenance system (WUMS) that would satisfy all the requirements for a disaster preventive SHM system of civil structures. The WUMS is designed to measure diverse types of structural responses in realtime based on wireless communication, allowing users to selectively use WiFi RF band and finally working in standalone mode by means of the field-programmable gate array (FPGA) technology. To verify its performance, the following tests were performed: (i) A test to see how far communication is possible in open field, (ii) a test on a shaker to see how accurate responses are, (iii) a modal test on a bridge to see how exactly characteristic real-time dynamic responses are of structures. The test results proved that the WUMS was able to secure stable communication far up to nearly 800 m away by acquiring wireless responses in realtime accurately, when compared to the displacement and acceleration responses which were acquired through wired communication. The analysis of dynamic characteristics also showed that the wireless acceleration responses in real-time represented satisfactorily the dynamic properties of structures. Therefore, the WUMS is proved valid as a SHM, and its outstanding performance is also proven.

There has recently been an increase in interest in structural health monitoring (SHM) using wireless sensor networks. For SHM, in particular, it is important to accurately and efficiently measure the dynamic acceleration response using wireless sensor networks in real-time. For the purpose, a CAFB (cochlea-inspired artificial filter bank) has been developed in a previous study, which is a dynamic data compression technology. Since the developed CAFB can select and compress only the interested range of frequency signals from an entire response of a structure, it efficiently provides a real-time dynamic response based on wireless networking. CAFB of the previous study is optimized to selectively acquire low-frequency signals of sub-10 Hz, which is required for SHM of long and large-scale structures. According to the CAFB’s optimization using an El-Centro seismic waveform, six band-pass filters, 1.0 Hz interval, and 0.6 Hz bandwidth have been adapted. This article is to evaluate dynamic acceleration response performance of civil structures using the CAFB developed in the previous study. To achieve the purpose, the optimally-designed CAFB was embedded in an intelligent data acquisition (IDAQ) system. To evaluate the performance of the IDAQ system with the embedded CAFB, the real-time dynamic response was investigated for a model cable-stayed bridge, measured by a wire-measuring system and the CAFB-based IDAQ system simultaneously. The results show excellent agreement between the compressed dynamic response acquired by the CAFB-based IDAQ system and that acquired by the wire measuring system. In addition, the measurement from the CAFB-based IDAQ system revealed the modal information of the model bridge. The developed CAFB can determine and reconstruct the entire dynamic response from compression with modal information only; its efficient operation illustrates its potential to be utilized in real-time structural health monitoring.

Storage racks are nonstructural components mainly designed to support the vertical load of goods. During strong external loads such as an earthquake, which acts in the lateral direction of the racks, stored goods become structurally vulnerable. To identify and reinforce the vulnerable parts of storage racks and improve their seismic performance, we developed a viscoelastic damper system with a capacity designed for storage racks. First, we performed an experiment to analyze the behavioral characteristics of a pallet rack — a representative storage rack used for large goods — under vibration. Based on the results of the experiment, we chose the members of storage racks that were vulnerable to vibration. For the proper seismic reinforcement of vulnerable members, we developed a viscoelastic damping system for storage racks by calculating the structural shear force on each floor of the rack and the capacity of the damper to distribute the shear force. First, three viscoelastic dampers of different capacities were fabricated using a viscoelastic material and subjected to cyclic loading tests to evaluate their mechanical performance. We determined the position on which the damper should be placed to improve the rack’s seismic performance by considering the shear force on each floor of the storage rack and its operational characteristics. Finally, we conducted a shaking table test to verify the new viscoelastic damper system. The system improves the seismic performance of storage racks by controlling their elastic and permanent deformations.