For modern high-efficiency gas turbines, film cooling is an essential method to protect the turbine blade from the hot gas, and the issue about how to improve the film cooling performance has attracted much attention. This study presents a new design concept used for film cooling in gas turbine to improve the overall cooling effectiveness and better decrease the metal temperature of the blade at the same time. A tree-shaped film cooling structure is considered. To validate the superiority of the proposed structure, a series of numerical simulation cases are conducted at three typical blowing ratios (i.e. 0.5, 0.764, and 0.9). The first case is a film cooling channel with a single film hole with a diameter of 5 mm and it is inclined by α = 45° relative to the mainstream direction and the other three cases are tree-shaped structures with one level, two levels and three levels of bifurcations. Moreover, the same boundary conditions and turbulence model (realizable k–ε) are adopted, and three-dimensional numerical simulations are used for all cases. The computed results show that the higher the blowing ratio, the better is the overall effectiveness downstream the film holes of the tree-shaped structures, whereas the opposite is valid for the case with a single film hole. Additionally, the overall effectiveness of the tree-shaped structures is improved more than 50% compared with Case 1 with a single film hole, and the results also demonstrate that the more levels of the structure, the lower the metal temperatures will be. Therefore, it is indicated that this research will make a contribution to a higher performance gas turbine.
This paper investigates a hybrid two-phase approach toward exploratory behavior in robotics. In a first phase, controllers are evolved to maximize the quantity of information in the sensori-motor datastream generated by the robot. In a second phase, the data acquired by the evolved controllers is used to support an information theory-based controller, selecting the most informative action in each time step. The approach, referred to as EvITE, is shown to outperform both the evolutionary and the information theory-based approaches standalone, in terms of actual exploration of the arena. Further, the EvITE controller features some generality property, being able to efficiently explore other arenas than the one considered during the first evolutionary phase.
More and more infrared imaging systems were applied in military and civil fields and the performance of detecting dim target is one important index for infrared imaging system. The performance of the method based on background suppression is declined with many false alarms and even loss target in image with clutter background. In order to improve the performance of dim target detection, the method base on target enhance is developed. In this paper, after analyzing the grey value distribution of target, background and noise in local area, the pixel's shape parameter was defined, maximum strategy was used to obtain one size of pixel's shape parameter, and enumerate strategy was used to search the possible target size. And then, one character filter based on shape parameter was designed to enhanced target and suppress clutter background. Compared with the method based on background suppression, experimental results show that proposal method is effective to enhance target and suppress clutter background.
5 January 2021 in International Journal of Biometrics
In order to overcome the problems of large error and long time-consuming in traditional feature recognition methods, this paper proposes a new fingerprint feature recognition method based on deep learning. Firstly, fingerprint identity database is established, and the access control fingerprint image is collected by the modified hardware equipment, and the image pre-processing is realised from two aspects: image screening and morphological processing. In this framework, the fingerprint direction field in the fingerprint image is screened through multiple iterations. The feature points in the fingerprint image of access control are extracted, and the similarity between the image and the information base is calculated. The experimental results show that compared with the traditional recognition method, the recognition speed of the proposed method is improved by about 6.6 seconds on the premise of ensuring the accuracy of recognition.
An efficient spectrum reconstruction algorithm based on the Tikhonov regularization for terahertz (THz) synthetic aperture radar (SAR) azimuth non-uniform sampling is proposed in this article. The high bandwidth, high azimuth resolution, and high frame rate characteristics of THz SAR contribute to its wide application prospects in both military and civilian remote sensing fields. However, the higher azimuth sampling rate also leads to the more severe non-uniform sampling issues of THz SAR. Traditional methods based on the hardware adjustment of pulse repetition frequency (PRF) and simple interpolation for azimuth resampling struggle to meet the higher imaging quality requirements. The back projection algorithm (BPA) can accurately focus non-uniformly sampled data but requires significant computational resources. The algorithm proposed in this paper, which can reconstruct the wavenumber spectrum of SAR azimuth non-uniformly sampled signals, transforms the spectrum reconstruction problem into a linear equation system and solves it using Tikhonov regularization, thereby exhibiting higher computational efficiency compared to BPA. Furthermore, the proposed algorithm is derived from precise theoretical formulations and controls the solution error by utilizing a regularization parameter, leading to a superior imaging quality compared to the azimuth resampling algorithm. In this paper, an accurate spectrum reconstruction formula of non-uniform sampling signals with a finite length is derived, the influence of noise error on the solution is analyzed, and the THz SAR azimuth non-uniform sampling signals are processed from the wavenumber domain. Finally, simulation and experimental results verify the effectiveness of the proposed algorithm.
Turnout system has great impact on the safety of China high-speed railway, thus the fault diagnosis process of the turnout becomes an urgent and challenging task. Aiming at the diagnosis issue, an improved CBR approach is introduced. First, a compound distance metric including a dynamic time warping metric and an improved Euclidean distance metric with feature extraction is introduced to give a more accurate retrieval solution on the data sequences, then for the extracted features, a dynamic feature weight allocation method based on introspective learning is adopted to increase the diagnosis performance of turnout. The evaluation of the method was carried out with a real turnout data set, the comparison experimental results with other commonly used methods show that the proposed method achieves the best diagnosis performance, proves the effectiveness of improved CBR method and the proposed method could enhance the diagnosis performance, and guarantee the safety of high-speed rail way.