Chitosan and its modifiers have been widely studied for their good biocompatibility and excellent adsorption properties for heavy metal ions. The synthesis and application of modified chitosan, the effects of process variables (such as pH, amount of adsorbent, temperature, contact time, etc.), adsorption kinetics, thermodynamics and the adsorption mechanism on the removal of heavy metal ions are reviewed. The purpose is to provide the latest information about chitosan as adsorbent and to promote the synthesis of modified chitosan and its application in the removal of heavy metals.
Bipolar membrane electrodialysis (BMED) is a promising process for the cleaner production of organic acid. In this study, the separation mechanism of BMED with different cell configurations, i.e., BP-A, BP-A-C, and BP-C (BP, bipolar membrane; A, anion exchange membrane; C, cation exchange membrane), to produce diprotic malic acid from sodium malate was compared in consideration of the conversion ratio, current efficiency and energy consumption. Additionally, the current density and feed concentration were investigated to optimize the BMED performance. Results indicate that the conversion ratio follows BP-C > BP-A-C > BP-A, the current efficiency follows BP-A-C > BP-C > BP-A, and the energy consumption follows BP-C < BP-A-C < BP-A. For the optimized BP-C configuration, the current density was optimized as 40 mA/cm2 in consideration of low total process cost; high feed concentration (0.5–1.0 mol/L) is more feasible to produce diprotic malic acid due to the high conversion ratio (73.4–76.2%), high current efficiency (88.6–90.7%), low energy consumption (0.66–0.71 kWh/kg) and low process cost (0.58–0.59 USD/kg). Moreover, a high concentration of by-product NaOH (1.3497 mol/L) can be directly recycled to the upstream process. Therefore, BMED is a cleaner, high-efficient, low energy consumption and environmentally friendly process to produce diprotic malic acid.
The service life of artificial joints has gradually failed to meet the needs of patients. Herein, the synergistic lubrication and antioxidant efficacies of graphene oxide (GO) and fullerenol (Fol) as biological lubricant additives for artificial joints were investigated. The lubrication mechanisms of biological lubricant containing GO and Fol at the friction interface of artificial joints were then revealed. Tribological tests showed that the average friction coefficients of Al2O3–Ti6Al4V pairs and Ti6Al4V–UHMWPE pairs for artificial joints could be reduced by 30% and 22%, respectively, when GO and Fol were used as biological lubricant additives simultaneously. The lubrication mechanism showed that some incommensurate sliding contact surfaces could be formed between the GO nanosheets and spherical Fol at the interface, which reduced the interaction forces of friction pairs. The maximum scavenging rates of •OH and DPPH free radicals by the biological lubricant containing GO and Fol were 35% and 45%, respectively, showing a good antioxidant efficacy of the biological lubricant. This can be attributed to the GO and Fol scavenging free radicals through electron transfer and hydrogen transfer. This study provides a theoretical basis for the development and application of carbon nanomaterials as biological lubricant additives for artificial joints in the future.
In recent years, the massive use of pharmaceuticals has led to the detection of a large number of relevant residues in water. As emerging contaminants, pharmaceuticals residues in the environment pose a major threat to human health and ecosystems. Covalent organic polymers (COPs) possess high stability, uniform pore size, and easy functionalization, which have attracted great attention in water treatment. In this study, a novel covalent organic polymer was successfully studied by a simple synthesis method, combining p-phenylenediamine (Pd) and isophthalaldehyde (Is) via a Schiff-base (referred to PdIs-COP), which was used as an absorbent for the removal of indomethacin from aqueous solutions. The composite was characterized with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) specific surface area and thermogravimetric (TGA) analysis. The effect of changes in the pH values and the adsorption time on the adsorption capacity was also investigated. The results of this study indicated that the absorbent had a high adsorption capacity for indomethacin. The adsorption capacity of PdIs-COP for indomethacin is 92.86 mg g−1 at pH of five and a contact time of 2 min. This shows that PdIs-COP is a novel material with good affinity for pharmaceuticals.