Rong Su

Dr. Rong Su

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 October 2023 in Processes
Verified
Journal Article
Open access
PDF file
ZYZongjun Yin
Zongjun Yin
CZChunying Zhang
Chunying Zhang
RSRong Su
Rong Su
XMXuegang Ma
Xuegang Ma
RWRu Wang
Ru Wang
Regenerative braking technology is a viable solution for mitigating the energy consumption of electric vehicles. Constructing a distribution strategy for regenerative braking force will directly affect the energy saving efficiency of electric vehicles, which is a technical bottleneck of battery-powered electric vehicles. The distribution strategy of the front- and rear-axle braking forces of electric vehicles that possess integrated front-wheel-drive arrangements is established based on the Economic Commission of Europe (ECE) regulations, which enables the clarification of the total braking force of the front axle. The regenerative braking torque model of the motor is adjusted to optimize the ratio of motor braking force to the whole front-axle braking force. The regenerative braking process of electric vehicles is influenced by many factors, such as driving speed and braking intensity, so regenerative braking presents characteristics of nonlinearity, time variability, delay, and incomplete models. By considering the impact of fuzzy controllers having better robustness, adaptability, and fault tolerance, a fuzzy control strategy is employed in this paper to accomplish the regenerative braking force distribution on the front axle. A regenerative braking model is created on the Simulink platform using the braking force distribution indicated above, and experiments are run under six specific operating conditions: New European Driving Cycle (NEDC), World Light-Duty Vehicle Test Cycle (WLTC), Federal Test Procedure 72 (FTP-72), Federal Test Procedure 75 (FTP-75), China Light-Duty Vehicle Test Cycle-Passenger (CLTC-P), and New York City Cycle (NYCC). The findings demonstrate that in six typical cycling road conditions, the energy saving efficiency of electric vehicles has greatly increased, reaching over 15%. The energy saving efficiency during the WLTC driving condition reaches 25%, and it rises to 30% under the FTP-72, FTP-75, and CLTC-P driving conditions. Furthermore, under the NYCC road conditions, the energy saving efficiency exceeded 40%. Therefore, our results verify the effectiveness of the regenerative braking control strategy proposed in this paper.

14 December 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
ZYZongjun Yin
Zongjun Yin
XMXuegang Ma
Xuegang Ma
CZChunying Zhang
Chunying Zhang
RSRong Su
Rong Su
RWRu Wang
Ru Wang
With increasing global attention to climate change and environmental sustainability, the sustainable development of the automotive industry has become an important issue. This study focuses on the regenerative braking issues in pure electric vehicles. Specifically, it intends to elucidate the influence of the braking force distribution of the front and rear axles on access to energy recovery efficiency. Combining the I curve of a pure electric vehicle and the boundary line of the Economic Commission of Europe (ECE) regulations, the braking force distribution relationship between the front and rear axles is formulated to satisfy braking stability. The maximum regenerative braking force of the motor is determined based on the motor torque characteristics and battery charging power, and the regenerative braking torque is optimized by combining the constraints of the braking strength, battery state of charge (SOC), and vehicle speed. Six road working conditions are built, including the New European Driving Cycle (NEDC), the World Light-Duty Vehicle Test Cycle (WLTC), Federal Test Procedure 72 (FTP-72), Federal Test Procedure 75 (FTP-75), the China Light-Duty Vehicle Test Cycle—Passenger (CLTC-P), and the New York City Cycle (NYCC). The efficiency of the regenerative braking strategy is validated by using the Simulink/MATLAB simulation. The simulation results show that the proposed dynamic logic threshold control strategy can significantly improve the energy recovery effect of electric vehicles, and the energy recovery efficiency can be improved by at least 25% compared to the situation without regenerative braking. Specifically, under the aforementioned road working conditions, the braking energy recovery efficiency levels are 27.69%, 42.18%, 49.54%, 47.60%, 49.28%, and 51.06%, respectively. Moreover, the energy recovery efficiency obtained by the current dynamic logic threshold is also compared with other published results. The regenerative braking control method proposed in this article makes the braking control of electric vehicles more precise, effectively reducing energy consumption and improving the driving range of electric vehicles.

Verified
Journal Article
Open access
PDF file
ZYZongjun Yin
Zongjun Yin
CZChunying Zhang
Chunying Zhang
XMXuegang Ma
Xuegang Ma
RSRong Su
Rong Su
The suspension system is a crucial part of an electric vehicle, which directly affects its handling performance, driving comfort, and driving safety. The dynamics of the 8-DoF full-vehicle suspension with seat active control are established based on rigid-body dynamics, and the time-domain stochastic excitation model of four tires is constructed by the filtered white noise method. The suspension dynamics model and road surface model are constructed on the Matlab/Simulink simulation software platform, and the simulation study of the dynamic characteristics of active suspension based on the fractional-order PIλDμ control strategy is carried out. The three performance indicators of acceleration, suspension dynamic deflection, and tire dynamic displacement are selected to construct the fitness function of the genetic algorithm, and the structural parameters of the fractional-order PIλDμ controller are optimized using the genetic algorithm. The control effect of the optimized fractional-order PIλDμ controller based on the genetic algorithm is analyzed by comparing the integer-order PID control suspension and passive suspension. The simulation results show that for optimized fractional-order PID control suspension, compared with passive suspension, the average optimization of the root mean square (RMS) of acceleration under random road conditions reaches over 25%, the average optimization of suspension dynamic deflection exceeds 30%, and the average optimization of tire dynamic displacement is 5%. However, compared to the integer-order PID control suspension, the average optimization of the root mean square (RMS) of acceleration under random road conditions decreased by 5%, the average optimization of suspension dynamic deflection increased by 3%, and the average optimization of tire dynamic displacement increased by 2%.

6 September 2023 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
ZYZongjun Yin
Zongjun Yin
RSRong Su
Rong Su
RWRu Wang
Ru Wang
The driving smoothness of vehicles is heavily influenced by their suspension system, and implementing active suspension control can effectively minimize the vibration movement of the vehicle and ensure a comfortable driving experience. An 8-DoF active suspension model of the full vehicle is established, and a fuzzy-PID controller is designed to autonomously regulate the parameters of the PID controller. Using the MATLAB/Simulink environment, a simulation model for suspension is created, and the vibration characteristics of passive, PID control, and fuzzy-PID control suspensions are compared with the help of the continuous crossing road hump model and C-level road model as road inputs. The results show that the utilization of fuzzy-PID control considerably diminishes the vertical, pitch, and roll oscillations of the suspension body and modifies the suspension dynamic deflection and tire dynamic load in contrast to the other two scenarios, thus enhancing ride comfort. Fuzzy-PID control led to a decrease of approximately 40% in acceleration, 25% in suspension workspace, and 30% in tire deflection compared to passive suspension. In addition, the reduction in acceleration is about 20%, the reduction in suspension workspace is approximately 10%, and the reduction in tire deflection is about 15% compared to the PID control suspension system.

25 March 2025 in Machines
Verified
Journal Article
Open access
PDF file
ZYZongjun Yin
Zongjun Yin
CCChenyang Cui
Chenyang Cui
XMXuegang Ma
Xuegang Ma
RSRong Su
Rong Su
CZChunying Zhang
Chunying Zhang
This paper presents a comprehensive vehicle model featuring an active suspension system integrated with semi-active seat and engine mounting controls. The time-domain stochastic excitation of the four tires was modeled using the filtered white noise method, and the required road excitation was simulated using MATLAB software R2022b. Four comprehensive performance indices, including engine dynamic displacement, vehicle body acceleration, suspension dynamic deflection, and tire dynamic displacement, were selected and made dimensionless by the performance indices of a passive suspension under the same working conditions to construct the fitness function. A fractional-order PIλDμ (FOPID) controller was proposed, and its structural parameters were optimized using a gray wolf optimization algorithm. Furthermore, the optimized FOPID controller was evaluated under five road conditions, and its performance was compared with integer-order PID control and passive suspensions. The results demonstrate that the FOPID controller effectively improves the smoothness of the vehicle by reducing engine mounting deflection, vehicle body acceleration, suspension deflection, and tire displacement. Moreover, the simulation results indicate that, compared to the passive suspension, the FOPID-controlled suspension achieves an average optimization of over 42% in the root mean square (RMS) of body acceleration under random road conditions, with an average optimization of more than 38% for suspension deflection, 4.3% for engine mounting deflection, and 2.5% for tire displacement. In comparison to the integer-order PID-controlled suspension, the FOPID-controlled suspension demonstrates an average improvement of 28% in the RMS of acceleration and a 2.1% improvement in suspension deflection under random road conditions. However, the engine mounting deflection and tire displacement are reduced by 0.05% and 0.3%, respectively. FOPID control has better performance in vehicle acceleration control but shows asymmetrical effects on tire dynamic deflection.

9 September 2025 in Processes
Verified
Journal Article
Open access
PDF file
HHHanchun Hu
Hanchun Hu
DLDengyan Long
Dengyan Long
YLYi Liang
Yi Liang
BWBuyun Wang
Buyun Wang
ZHZicheng Huang
Zicheng Huang
RSRong Su
Rong Su
With the continuous expansion of the application field of mobile robots, the diversification and complexity of the application scenarios have put forward higher requirements for their motion control performance. In order to enhance the ability to brake fast and to prevent slipping when the mobile robot is working, a slipping ratio tracking strategy based on an improved integral sliding mode algorithm regulated by a composite convergence law is proposed. The composite convergence law is proposed by integrating the power law with the exponential convergence law. A mathematical model of a single-wheeled mobile robot is established, a relationship curve between slipping ratio and pavement adhesion coefficient is introduced to estimate the pavement adhesion coefficient, and an improved integral sliding mode controller is designed. The stability is verified using Lyapunov stability theory. The slipping ratio is tracked based on the integral sliding-mode controller, and the slipping ratio is corrected to control the wheel slipping ratio near the ideal optimal slipping ratio. Furthermore, simulation experiments are conducted in MATLAB/Simulink (R2020b) under two typical working conditions to compare the proposed control strategy with conventional sliding-mode control regulated by an exponential convergence law. Finally, the mobile robot slipping ratio tracking experiments are conducted to verify the simulation results, which show that the proposed control strategy enables the mobile robot to reach the ideal braking state more quickly and stably, thereby improving the braking effect of the ABS braking system of the mobile robots.