The electrification of an aircraft’s propulsive system is identified as a potential solution towards a lower carbon footprint in the aviation industry. One of the effects of increased electrification is the generation of a large amount of waste heat that needs to be removed. As high-power systems must be cooled to avoid performance deterioration such as battery thermal runaway, a suitable thermal management system is required to regulate the temperature of the powertrain components. With this in mind, the main objective of this research is to identify promising heat transfer technologies to be integrated into a thermal management system (TMS) such that power, mass, and drag can be minimised for a parallel hybrid–electric regional aircraft in the context of the EU-funded FutPrInt50 project. Five different TMS architectures are modelled using the Matlab/Simulink environment based on thermodynamic principles, heat transfer fundamentals, and fluid flow equations. The systems are a combination of a closed-loop liquid cooling integrated with different heat dissipation components, namely ram air heat exchanger, skin heat exchanger, and fuel. Their cooling capacity and overall aircraft performance penalties under different flight conditions are estimated and compared to each other. Then, a parametric study is conducted, followed by a multi-objective optimisation analysis with the aim of minimising the TMS impact. As expected, none of the investigated architectures exhibit an ideal performance across the range of the studied metrics. The research revealed that, while planning the TMS for future hybrid–electric aircraft, alternative architectures will have to be developed and studied in light of the power requirements.
1 January 2014 in Mathematical Problems in Engineering
The design of the spacecraft Attitude Control System (ACS) becomes more complex when the spacecraft has different type of components like, flexible solar panels, antennas, mechanical manipulators and tanks with fuel. The interaction between the fuel slosh motion, the panel’s flexible motion and the satellite rigid motion during translational and/or rotational manoeuvre can change the spacecraft center of mass position damaging the ACS pointing accuracy. This type of problem can be considered as a Fluid‐Structure Interaction (FSI) where some movable or deformable structure interacts with an internal fluid. This paper develops a mathematical model for a rigid‐flexible satellite with tank with fuel. The slosh dynamics is modelled using a common pendulum model and it is considered to be unactuated. The control inputs are defined by a transverse body fixed force and a moment about the centre of mass. A comparative investigation designing the satellite ACS by the Linear Quadratic Regulator (LQR) and Linear Quadratic Gaussian (LQG) methods is done. One has obtained a significant improvement in the satellite ACS performance and robustness of what has been done previously, since it controls the rigid‐flexible satellite and the fuel slosh motion, simultaneously.
The design of the satellite attitude control system (ACS) becomes more complex when the satellite structure has different type of components like, flexible solar panels, antennas, mechanical manipulators, and tanks with fuel. A crucial interaction can occur between the fuel slosh motion and the satellite rigid motion during translational and/or rotational manoeuvre since these interactions can change the satellite centre of mass position damaging the ACS pointing accuracy. Although, a well-designed controller can suppress such disturbances quickly, the controller error pointing may be limited by the minimum time necessary to suppress such disturbances thus affecting the satellite attitude acquisition. As a result, the design of the satellite controller needs to explore the limits between the conflicting requirements of performance and robustness. This paper investigates the effects of the interaction between the liquid motion (slosh) and the satellite dynamics in order to predict what the damage to the controller performance and robustness is. The fuel slosh dynamics is modelled by a pendulum which parameters are identified using the Kalman filter technique. This information is used to design the satellite controller by the linear quadratic regulator (LQR) and linear quadratic Gaussian (LQG) methods to perform a planar manoeuvre assuming thrusters are actuators.
Even though shape optimization is a powerful tool for designing aerospace vehicles, it can be time-consuming when high-fidelity models are employed. Thus, lower-fidelity simulations covering a wider design space can be a solution for shape optimization in the early design phases. With this in mind, the present work aims to develop a low-fidelity and fast method to conduct nozzle shape optimization. This method consists in using the free-form deformation (FFD) parameterization technique to control the nozzle shape by means of an optimization algorithm to maximize the coefficient of thrust determined by a two-dimensional method of characteristics (MoC). To verify the reliability of the proposed method, a similar optimization process is carried out, recurring to high-fidelity simulations, namely using an Euler solver, in the open-source framework $$\text {SU}^2$$ . This latter optimization process is established as a surrogate-based optimization (SBO) not only to mitigate the $$\text {SU}^2$$ framework limitations in performing shape optimization on nozzles, but also as a way to reduce the computational power. A good agreement between the results from both methods is achieved, displaying solely a small offset concerning the optimal contour width and the coefficient of thrust. Hence, this proves the usefulness of the developed shape optimization strategy based on the MoC for the preliminary design of nozzles.
1 December 2014 in Applied Mechanics and Materials
The design of the satellite Attitude Control System (ACS) becomes more complex when the satellite structure has different type of components like, flexible solar panels, antennas, mechanical manipulators and tanks with fuel, since the ACS performance and robustness will depend if the dynamics interaction effects between these components are considered in the satellite controller design. A crucial interaction can occur between the fuel slosh motion and the satellite rigid motion during translational and/or rotational maneuver since these interactions can change the satellite center of mass position damaging the ACS pointing accuracy. Although, a well-designed controller can suppress such disturbances quickly, the controller error pointing may be limited by the minimum time necessary to suppress such disturbances affecting thus the satellite attitude acquisition. It is known that one way to minimize such problems is to design controllers with a bandwidth below the lowest slosh and/orvibration mode which can result in slow maneuvers inconsistent with the space mission requirements. As a result, the design of the satellite controller needs to explore the limits between the conflicting requirements of performance and robustness. This paper investigates the effects of the interaction between the liquid motion (slosh) and the flexible satellite dynamics in order to predict what the damage to the controller performance and robustness is. The fuel slosh dynamics is modeled using its pendulum analogs mechanical system which parameters are identified using the Kalman filter technique. This information is used to designs and to compare the satellite attitude control system by the Linear Quadratic Regulator (LQR) and the Linear Quadratic Gaussian (LQG methods. Besides, one investigates the effects of the rod length estimation in the plant of the system stability. This investigation has shown that the poles of the plant to walk to and from the imaginary axis, leaving in the end the plant more stable.