The construction process of pile foundations can significantly disrupt the soil. Therefore, it is necessary to limit the degree of soil disturbance caused by pile foundation construction to an acceptable level. This paper examines the disturbance effects of pile driving on soft soil foundations, specifically analyzing the squeezing effect of squeezed soil piles and the unloading effect of non-squeezed soil piles. To investigate these effects, two typical squeezed soil piles, a hydrostatic pile, and a bag grouting pile, as well as a typical non-squeezed soil pile (a bored pile) are selected. Specifically, a novel construction method for numerical models, which simulates the mechanical processes of different pile types under standard grids, is proposed. Three crucial indicators—soil displacement field, stress field, and disturbance influence range—are chosen to compare the disturbance effects of three types of piles on the soil. Results indicate that the two types of squeezed soil piles cause significant disturbance to the soil displacement field, especially in the horizontal direction, while causing a relatively slight disturbance to the soil stress field. Among the two of them, the disturbance magnitude and range of the hydrostatic pile are greater than those of the bag grouting pile. For the non-squeezed soil pile, the soil displacement field changes minimally and the stress field remains basically unchanged during the pile driving process of the bored pile. To compare and quantify the disturbance effects of three types of piles on soil, the soil disturbance range in the horizontal direction of each pile is normalized by its radius. Results indicate that the horizontal disturbance values of maximum horizontal stress for all three types of piles are approximately 1/5 of the pile length above the pile tip, with normalized values of 7.6, 5.5, and 3.5, respectively. The maximum horizontal deformation disturbance range in the horizontal direction occurs near the ground surface and has normalized values of 15.2, 7.5, and 1.1 for the three types of piles, respectively. Therefore, the hydrostatic pile has the greatest disturbance effect, followed by the bag grouting pile and the bored pile. However, within the allowable range of disturbance in practical engineering, the optimal piling method can be selected by comprehensively considering factors such as the construction difficulty and economic costs.

Pile groups are frequently employed to reinforce soft soil foundations, while the piling process frequently disturbs the adjacent foundation. The shielding effect, which prevents the transmission of disturbances from pile installation, is indispensable for minimizing engineering disturbances and optimizing pile group construction techniques. However, current research focuses predominantly on characterizing the phenomenon of shielding, with a limited exploration of the mechanism. To eliminate the limitation, a numerical investigation of the shielding mechanism of pile groups in a pile–soil system is performed this study. Using the finite difference program FLAC^3D and the cavity expansion theory, a three-dimensional numerical model of a pile–soil foundation was created. During the sequential penetration of piles, the response characteristics of the soil surrounding the piles were investigated. Displacement field was first investigated to determine the presence of shielding effects in the pile group and then highlighted the effective role of the existing piles in controlling deformation. Furthermore, through a combined analysis of the stress and strain fields during piling, the mechanism of the shielding effect induced by pile construction is proposed, which is attributed to the direct obstruction effect of piles and the “soil arching effect” created by the soil between piles. The former is reflected by the direct barrier of the existing pile to the soil displacement induced via the installation of the new piles. The latter is reflected by the obstruction of soil between two existing piles to the displacement of soil passing through the two existing piles. This research provides a comprehensive understanding of the mechanical behavior of the pile–soil system and has practical implications for controlling disturbances and optimizing construction techniques in piling engineering projects.

Large colluvial landslides often exhibit creep characteristics influenced by slip zones, whose behavior is closely related to their inherent structure and stress conditions. To investigate this, a triaxial compression creep test on undisturbed slip zone soil was conducted. The results revealed that the soil exhibited a short period of attenuation creep following temporary deformation, then quickly transitioned into the steady creep stage. A rivalry mechanism between hardening and damage effects was suggested to explain and quantitatively characterize the various stages of creep. On this purpose, a three-dimensional constitutive model (H-D^3D) was constructed to effectively capture the staged creep behavior, meanwhile a sophisticated approach to solving model parameters was also put forth, considering well the characteristics of each creep stage. After that, the H-D^3D model was implemented in FLAC^3D through secondary development to numerically solve the complex creep behavior of slip zones and landslides. The results demonstrate that employment of the suggested model successful represents the staged deforming behavior of the targeted landslide that is influenced by fluctuating water levels, confirming the accuracy as well as applicability of the proposed model. Therefore, this research introduces a critical theoretical framework and computational tool for analyzing the deformation behavior of colluvial landslides.