This work presents the development of the navigation and control subsystems of a guidance, navigation and control (GNC) system for controlling an autonomous satellite, called chaser, equipped with a redundant manipulator. In the study, the capture operations of a target spacecraft and its stabilization are considered. The control function employs a combined control strategy: the chaser satellite actuators and the robotic arm joint motors are degrees of freedom of the same control plant. Robust control methods are used to cope with uncertain, nonlinear dynamics of the chaser and of the complete chaser–target stack after capture. The developed navigation function is based on active or passive electro-optical sensors (i.e., passive cameras and/or LIDARs) for the relative pose determination. A numerical simulator capable of representing the dynamics of the system (chaser, manipulator, target) in orbit is developed in the MATLAB/Simulink environment to validate the developed GNC algorithms. The simulation tool allows to thoroughly assess the GNC system performance, accounting for all the relevant external disturbances and error sources. The simulator interfaces with a synthetic image generator (i.e., PANGU) for relative navigation performance assessment. This paper presents the testing of the GNC system in two relevant In-Orbit Servicing (IOS) scenarios: (1) the servicing of a large GEO platform and (2) the servicing of a small satellite in Low Earth Orbit (LEO).
1 February 2025 in Journal of Guidance, Control, and Dynamics
Autonomous spacecraft proximity operations represent a key enabler for future mission architectures such as in-orbit servicing, active debris removal, object inspection, and in-orbit assembly. This work addresses safety concepts for the relative trajectory guidance design applicable to challenging proximity operations in the close-range domain. The relative orbital element framework is used to formulate safety checks that improve the trajectory’s robustness in case of chaser’s malfunctions or loss of control. Particularly, concepts of passive abort safety and active collision safety are applied to the trajectory design to maintain the chaser outside keep-out zones. These definitions are included within a guidance algorithm that exploits sequential convex programming to efficiently solve the fixed final time safety-constrained close-range rendezvous problem. Test cases of reconfiguration between stable relative orbits and synchronization to a rotating hold point are presented, highlighting the advantages in using these new safety concepts in terms of safety, trajectory insight, and formulation efficiency.
In recent years, the interest in proximity operations to uncooperative and non-collaborative objects has been growing and and demanding for specific technology advances to tackle these challenging cases of in-orbit servicing and removal missions. Indeed, these architectures hold a crucial role in guaranteeing future sustainable and efficient space operations. One of the main challenges of conducting robotic operations with a chaser in close proximity to an uncooperative object stems from its rotational motion. A tumbling motion of a large target object may require a costly and complex synchronisation of the servicer relative trajectory to the capture point and hinder the safety of operations due to rotating appendages. In this paper, the plume impingement strategy is employed to control the target’s tumbling motion in a contactless fashion, thus guaranteeing feasible approach and capture operations. Specifically, guidance and control strategies to be employed during this delicate and complex operation are devised, focusing on improving the safety of the trajectory while maximising the efficiency of the impingement effect during proximity flight. Simulations discuss the detumbling of a satellite of a large constellation, critically comparing delta-v cost, trajectory safety and overall time of operations.