Rapid population growth tends to lead to the construction of tall buildings. It is thus necessary to study the influential parameters on the behaviour of tall structures due to wind action. Soil deformability is one parameter that can affect the aerodynamic behaviour of tall structures. In this work, the impact of wind on the standard tall building of the Commonwealth Advisory Aeronautical Research Council, placed on a raft footing, was numerically modelled using Abaqus software. The wind was defined by a power function in the boundary layer of the atmosphere. Stream turbulence was modelled using the implicit large eddy simulation technique and a co-simulation was used to exchange non-uniform loads from the fluid domain to the structural domain. The mechanical reaction of the footing–soil framework was modelled using a direct strategy. Infinite boundary conditions were added to the numerical model for simulation of free boundaries and appropriate contact elements for sliding and separation between subsurface components were considered. The fluid and structural solutions were compared with the mean and root mean square values of experimental estimations for an extensive range of reduced speeds. Numerical results for the framework with soil–structure interaction (SSI) were compared with those without SSI. The dynamic properties and reactions of the building subjected to wind loading were affected by the SSI and therefore engineers should consider these parameters to guarantee practical designs.
11 November 2020 in Journal of Applied Engineering Sciences
The purpose of this study is to assess the effects of cross-section and slenderness on the dynamic response of high-rise buildings constructed on the coarse soil. In this work, the simulation of the wind and soil effects on the high-rise buildings are done numerically using the ABAQUS software. The wind-induced vibration of the building models is studied through Computational Fluid Dynamics (CFD) and Computational Structural Dynamics (CSD). Co-simulation is accepted for the transfer of loads from the fluid to the structural domain. The mechanical response of the soil system is modeled using direct method. Suitable contact elements for slippage and separation modeling between subsurface elements are also considered. Finally, fluid and structural responses are compared in terms of mean and root mean square values with laboratory results on the wide range of reduced velocities. It is concluded that height and cross-section of building affect the vibrational response of the building, and therefore the designer must carefully consider these factors in order to ensure that the design is safe.
25 December 2025 in International Journal of Mechanics and Materials in Design