In this letter, we propose a novel spaceborne isoflux scanning phased array (ISPA) antenna at Ka-band for geostationary earth orbit (GEO) satellite communications. The ISPA can adaptively compensate for space loss variation during beam scanning. An innovative method for achieving the isoflux scanning characteristics of ISPA by using shared subarrays with an isoflux beam as equivalent elements has been proposed and verified. Taking the space loss variation law derived from the satellite-ground model as the isoflux beam optimization goal, the challenge associated with subarray beam shaping is mitigated greatly by utilizing a shared subarray architecture with a sharing ratio of 4:1, enhancing the subarray's radiation aperture and element number substantially. The optimization results of the shared subarray by using a weighted alternating reverse projection method are verified in full-wave simulation in ANSYS Electronics Desktop. Numerical results further demonstrate that the proposed ISPA can adaptively compensate for the inconsistency in satellite communication link variation during beam scanning and exhibits low sidelobes better than -20dB while effectively suppressing grating lobes.
In this paper, we propose an innovative spaceborne isoflux scanning digital phased array (ISDPA) design with two-stage digital beamforming (DBF) for geostationary satellites. To achieve isoflux scanning, a novel technique is presented to obtain an isoflux beam for the ISDPA equivalent element using a DBF completely shared subarray architecture and the differential evolution (DE) algorithm. By reutilizing the radiating elements of adjacent subarrays, the radiation aperture and element number are augmented, enhancing the degrees of optimization freedom. To validate the proposed design, a linear ISDPA with 16 DBF completely shared subarrays is optimized and analyzed using two sets of excitation coefficients in different DBF stages. The numerical results demonstrate that the proposed ISDPA can adaptively compensate for space loss variations during beam scanning for geostationary communications with low sidelobes better than −20 dB.
1 January 2024 in International Journal of RF and Microwave Computer-Aided Engineering
A spaceborne Earth‐coverage phased array (ECPA) antenna at Ka‐band is proposed for low‐Earth orbit (LEO) satellite applications, which is based on digital beamforming (DBF) partially shared subarray architecture to implement two stages of DBF. By taking into account the effects of mutual coupling in active element pattern optimization, a new method to obtain an Earth‐matched beam of the equivalent element of the ECPA is presented, in which the DBF‐shared subarray, segmental shaping technique, and differential evolution algorithm are utilized to achieve Earth‐coverage characteristic for the ECPA. Both the design method and the principle of DBF partially shared subarray for grating lobe suppression are presented. Moreover, a 16‐element DBF‐shared subarray with a shared ratio of 4:1 obtaining an Earth‐matched beam pattern is designed, optimized, and verified by full‐wave simulation in Ansys Electronics Desktop. Taking the DBF‐shared subarray as the equivalent element, an ECPA including 40 DBF‐shared subarrays is also designed and simulated. Numerical results demonstrate that the proposed ECPA has excellent performance of Earth‐coverage scanning to compensate for the satellite communication link variation caused by path loss variation during beam scanning for LEO applications. In addition, the ECPA has the advantages of a low sidelobe level better than −20 dB as well as grating lobe suppression.