Post-industrial recycling (PIR) and post-consumer recycling (PCR) are measures used to sustain resources by improving material circularity and sustainability. Currently, circularity is mainly measured as the degree of reutilization of a material from 0 to 100% at the product or company level. This measure fails to assess the resource usage over multiple product life cycles. Therefore, we propose to assess circularity as (i) the frequency of resource use in products (effective circularity, eC), and as (ii) a vehicle to reduce environmental impacts (environmentally efficient circularity, eeC). Additionally, to compare the environmental impacts of using recycled materials from PIR or PCR, we analyze their impact reduction potential (IRP), indicating the environmental benefits of recycling in relation to virgin material submitted to the market. We demonstrate the suggested indicators for a case study material: polypropylene. For this polymer type, the eC ranges between 0.93 and 9.08 uses of the resource, on average, depending on collection, sorting, and recycling rates. Likewise, the eeC ranges between 0.31 and 1.50 uses per kg of CO2 equivalents emitted. PCR has a higher IRP regarding climate change impacts than PIR in all analyzed scenarios. The results reveal the relevance of PCR and PIR beyond the product life cycle. Finally, we discuss possible embeddings of the indicators in the assessment of climate policy and environmental protection measures, such as strengthening the use of PCR in contrast to PIR materials.
Post-industrial recycling (PIR) and post-consumer recycling (PCR) are measures to sustain re-sources by improving materials’ circularity and sustainability. Currently, circularity is mostly measured as the degree of reutilization of a material from 0 to 100 % at product or company lev-el. This lacks in assessing the resources’ usage over multiple product life cycles. Therefore, we propose to assess circularity as (i) the frequency resources are used in products (effective circu-larity eC) and (ii) a vehicle to reduce virgin resource use and environmental impacts (environ-mentally efficient circularity eeC). Besides, to compare the environmental impacts of using recy-cled materials from PIR or PCR, we analyse their impact reduction potential (IRP) indicating the environmental benefits of recycling in relation to virgin material put onto the market. We demonstrate the suggested indicators for a case study material: polypropylene. For this polymer type, the eC ranges between 0.93 and 9.08 uses of the resource on average depending on collec-tion, sorting, and recycling rates. Likewise, the eeC ranges between 0.31 and 1.50 uses per kg of CO2 equivalents emitted. PCR has a higher IRP regarding climate change impacts than PIR in all analysed scenarios. The results reveal the relevance of PCR and PIR beyond the product life cycle.
Zusammenfassung Wie bereits detailliert beschrieben weisen Rezyklate im Vergleich zu Neuware häufig Schwankungen in der Zusammensetzung und den physikalischen Eigenschaften auf, was eine stabile Verarbeitung erschwert. Dies liegt unter anderem an den unterschiedlichen Bezugsquellen für PCR-Materialien. Materialien aus dem Gelben Sack beinhalten häufig Polyethylen vorwiegend als Folienqualität, während Polypropylen als Mischung aus Extrusions- und Spritzgießwaren vorliegen kann.
Zusammenfassung In den letzten Jahrzehnten stieg der Verbrauch von Kunststoffverpackungen kontinuierlich an, wurde jedoch ab 2019 durch Substitutionen durch beispielsweise Glas- oder Papierverpackungen sowie Materialeinsparungen gebremst. Flexible Verpackungen wie Standbodenbeutel gewinnen zunehmend an Bedeutung, da sie bei reduziertem Materialeinsatz ähnliche Schutzfunktionen wie rigide Verpackungen bieten und dadurch ökologische sowie ökonomische Vorteile ermöglichen. Trotz ihres Potenzials ist das Recycling flexibler Mehrschichtfolien noch stark eingeschränkt. Im Projekt PlasticBOND wurde daher ein recyclingfähiger Monowerkstoff-Standbeutel aus Polyethylen mit hohem Rezyklatanteil entwickelt. Das langfristige Ziel ist es, die Recyclingfähigkeit von Kunststoffverpackungen zu verbessern und gleichzeitig die Umweltauswirkungen zu minimieren.