The necessity of early warning systems to ensure people’s safety requires the usage of real-time monitoring instrumentation. To meet the required real-time monitoring performance, in-place inclinometer systems represent one of the most common solutions to obtain accurate measures over time. This paper presents the results of a laboratory tests campaign performed on the prototypes and preproduction samples of an in-place inclinometer chain for structural and geotechnical monitoring applications. First, each element sensor has been calibrated to reach a proper level of measure accuracy. Eventually, laboratory tests are carried out on both a single instrument (element) and on the complete measurement chain (system). The adopted centering device, obtained as a combination of a Cardan joint and four spring plungers avoids bending of elements by preventing fictitious displacement measurements and permits the creation of a kinematic chain that accommodates the displacements of a grooveless tube. A specially designed and constructed test set-up that permits assigning a movement to each node has been employed to test a specifically designed centering device and check the system stability over time. Different scenarios have been investigated to determine the accuracy and repeatability of the measures in replicating real cases. The results demonstrated the necessity of validating a measurement chain by analyzing its overall behavior and not limiting the study on the performances of a single element.
Rembrandt's painting Old Woman Praying , 1629/30, is the most valuable and exceptional work of art of the Residenzgalerie Salzburg (RGS). It is painted on a gilded copper plate with dimensions of only approximately 15 × 12 cm. The painting probably belongs to a series of three small‐scale tronies, all executed on gilded copper plates. This particular picture preparation, which represents a special feature in Rembrandt's work, is quite unusual in the history of art. Previous investigations on the comparable paintings The Laughing Man , 1629/30, in the Mauritshuis, The Hague and the Self Portrait , 1630, in the National Museum, Stockholm showed that the gilding of the copper plate was applied over a lead white ground. To characterize the painting in the RGS, X‐ray fluorescence (XRF) mapping was performed in a collaboration between the Research Office Residenzgalerie, Land Salzburg, the XGLab S.R.L, Milan, and the Conservation Science Department of the Kunsthistorische Museum Vienna (KHM). The results indicate a different structure for this painting than that used for The Laughing Man and the Self Portrait . The gilding was applied directly onto the copper plate, but with three areas with the gilding missing. It seems likely that in these sections, the gold was purposely removed to provide a different darker effect. XRF mapping yielded valuable insights into the structure of the painting and its technique as well as the principal pigments used for its composition.