As inelastic design for wind is embraced by the engineering community, there is an increasing demand for computational tools that enable the investigation of the nonlinear behavior of wind-excited structures and subsequent development of performance criteria. To address this need, a probabilistic collapse assessment framework for steel structures is proposed in this paper. The framework is based on the integration of a high-fidelity fiber-based nonlinear structural modeling environment with a wind-tunnel-informed stochastic wind load model to perform nonlinear time history analysis. General uncertainty is propagated using a stratified sampling scheme enabling the efficient estimation of reliabilities associated with rare events. The adopted models for simulating high-fidelity nonlinear structural behavior were found, in general, to be adequate for capturing phenomena, including progressive yielding, buckling, and low-cycle fatigue, that are essential for wind induced collapse analysis. In particular, the adopted fatigue model was found to be capable of predicting damage and potential fiber/section fracture associated with non–fully reversing stress-strain cycles that are characteristic of wind loading. Through illustration on a 45-story archetype steel building, critical discussions on the types of observed collapse mechanisms, the difference between along-wind and across-wind nonlinear behavior, reliabilities associated with first yield, and collapse are presented. A probabilistic description of the residual and peak story drifts is also provided through development of fragility functions.
The simulation of stochastic wind loads is necessary for many applications in wind engineering. The proper-orthogonal-decomposition-(POD)-based spectral representation method is a popular approach used for this purpose, due to its computational efficiency. For general wind directions and building configurations, the data-informed POD-based stochastic model is an alternative that uses wind-tunnel-smoothed auto- and cross-spectral density as input, to calibrate the eigenvalues and eigenvectors of the target load process. Even though this method is straightforward and presents advantages, compared to using empirical target auto- and cross-spectral density, the limitations and errors associated with this model have not been investigated. To this end, an extensive experimental study on a rectangular building model considering multiple wind directions and configurations was conducted, to allow the quantification of uncertainty related to the use of short-duration wind tunnel records for calibration and validation of the data-informed POD-based stochastic model. The results demonstrate that the data-informed model can efficiently simulate stochastic wind loads with negligible model errors, while the errors associated with calibration to short-duration wind tunnel data can be important.
10 December 2024 in Journal of Wind Engineering and Industrial Aerodynamics
The simulation of stochastic wind loads is necessary for many applications in wind engineering. The proper orthogonal decomposition (POD)-based spectral representation method is a popular approach used for this purpose due to its computational efficiency. For general wind directions and building configurations, the data-driven POD-based stochastic model is an alternative that uses wind tunnel smoothed auto- and cross-spectral density as input to calibrate the eigenvalues and eigenvectors of the target load process. Even though this method is straightforward and presents advantages compared to using empirical target auto- and cross-spectral density, the limitations and errors associated with this model have not been investigated. To this end, an extensive experimental study on a rectangular building model considering multiple wind directions and configurations was conducted to allow the quantification of uncertainty related to the use of wind tunnel data for calibration and validation of the data-driven POD-based stochastic model. Errors associated with the use of typical wind tunnel records for model calibration, the model itself, and the truncation of modes were quantified. Results demonstrate that the data-driven model can efficiently simulate stochastic wind loads with negligible model errors, while the errors associated with calibration to typical wind tunnel data can be important.