Alzheimer’s disease is characterized by a combination of several neuropathological hallmarks, such as extracellular aggregates of beta amyloid (Aβ). Numerous alternatives have been studied for inhibiting Aβ aggregation but, at this time, there are no effective treatments available. Here, we developed the tri-component nanohybrid system AuNPs@POM@PEG based on gold nanoparticles (AuNPs) covered with polyoxometalates (POMs) and polyethylene glycol (PEG). In this work, AuNPs@POM@PEG demonstrated the inhibition of the formation of amyloid fibrils, showing a 75% decrease in Aβ aggregation in vitro. As it is a potential candidate for the treatment of Alzheimer’s disease, we evaluated the cytotoxicity of AuNPs@POM@PEG and its ability to cross the blood–brain barrier (BBB). We achieved a stable nanosystem that is non-cytotoxic below 2.5 nM to human neurovascular cells. The brain permeability of AuNPs@POM@PEG was analyzed in an in vitro microphysiological model of the BBB (BBB-on-a-chip), containing 3D human neurovascular cell co-cultures and microfluidics. The results show that AuNPs@POM@PEG was able to cross the brain endothelial barrier in the chip and demonstrated that POM does not affect the barrier integrity, giving the green light to further studies into this system as a nanotherapeutic.
In this paper we present the in situ analysis of gas dependent alloying in bimetallic Au-Pd nanoparticles through a combination of CO-DRIFTS and in situ TEM providing direct insight in the surface- and nanoparticle bulk redistribution kinetics.
The uptake and release of hydrogen are key parameters for hydrogen storage materials. Lattice strain offers a powerful way to tune hydride formation in metal nanoparticles. However, the role of strain on hydride formation is difficult to assess on a single nanoparticle level due to the lack of in situ characterization tools to quantify strain in the presence of a gas. Here, we achieve a dynamic, in situ study on the reversible hydride formation in individual palladium nanocubes by applying 4D scanning transmission electron microscopy (4D-STEM) in the presence of 1 bar H2 and quantitatively assess the lattice strain with subnanometer resolution. Upon hydride formation at 125 °C, the Pd lattice expands by ∼3.1% and relaxes back upon hydrogen desorption at 200 °C. Our in situ 4D-STEM approach is relevant to a wide range of nanoparticle systems and applications, including catalyst- and gas-sensing materials.
Solid-state electrolytes play a key role in the development of safe and high-capacity all-solid-state batteries. Complex hydrides such as Li2B12H12 are attractive as solid electrolytes due to their low weight and good electrochemical stability, but suffer from low conductivities at room temperature. Herein, we report a three-order-magnitude increase in the ionic conductivity of Li2B12H12 upon nanocomposite formation with ZrO2 via mechanochemical treatment, reaching 2.9 × 10-4 S cm-1 at 30 °C. Results from infrared spectroscopy, X-ray Raman scattering and electron microscopy coupled with electron energy loss spectroscopy suggest that the increased ionic conductivity is due to strong interfacial interaction/reaction between Li2B12H12 and ZrO2. This leads to a highly defective interphase region where the Li, B, Zr, and O chemical environments are distinctively different from the bulk Li2B12H12 and ZrO2. The improved ionic conductivity of the nanocomposite compared to the pristine material enabled the realization of all-solid-state batteries with a Li metal anode and both TiS2 and LiFePO4 cathodes. We demonstrate the suitability of the nanocomposite at various charging rates up to C/2 (0.34 mA cm-2) for over 170 cycles at 40-60 °C (Li|Li2B12H12/ZrO2|TiS2).
Lattice strain in trimetallic Pt-shell Au1−xCux-core nanoparticles was tuned from tensile strain to compressive strain by increasing the Cu fraction in the AuCu-core.