In this study, a typical MXene material, Ti 3 C 2 , was selected as a co‐catalyst and then integrated with ZnO via a facile hydrothermal strategy. The phase composition, morphology, and photophysical properties of as‐prepared samples were investigated by XRD, field emission SEM, ultraviolet–visible spectrophotometer, and fluorescence spectrophotometer, respectively. In addition, the results of the photocatalysis experiment showed that the photocatalytic activity of ZnO can be improved significantly through the hybridisation with Ti 3 C 2 , which arises from the inhibition of the photogenerated carriers recombination. Furthermore, the theoretical analysis indicated that the high‐quantum efficiency arises from the appropriate Fermi level position of Ti 3 C 2 . This work demonstrated that Ti 3 C 2 will show great potential for constructing novel and efficient photocatalysts.
Building heterojunctions is a promising strategy for the achievement of highly efficient photocatalysis. Herein, a novel SnIn4S8@ZnO Z-scheme heterostructure with a tight contact interface was successfully constructed using a convenient two-step hydrothermal approach. The phase composition, morphology, specific surface area, as well as photophysical characteristics of SnIn4S8@ZnO were investigated through a series of characterization methods, respectively. Methylene blue (MB) was chosen as the target contaminant for photocatalytic degradation. In addition, the degradation process was fitted with pseudo-first-order kinetics. The as-prepared SnIn4S8@ZnO heterojunctions displayed excellent photocatalytic activities toward MB degradation. The optimized sample (ZS800), in which the molar ratio of ZnO to SnIn4S8 was 800, displayed the highest photodegradation efficiency toward MB (91%) after 20 min. Furthermore, the apparent rate constant of MB photodegradation using ZS800 (0.121 min−1) was 2.2 times that using ZnO (0.054 min−1). The improvement in photocatalytic activity could be ascribed to the efficient spatial separation of photoinduced charge carriers through a Z-scheme heterojunction with an intimate contact interface. The results in this paper bring a novel insight into constructing excellent ZnO-based photocatalytic systems for wastewater purification.
An efficient photocatalytic ozonation system that is sensitive to visible light was designed and fabricated over Cu(II)-grafted TiO2. The results show that oxalic acid was degraded efficiently in this system under visible light. This high efficiency was attributed to the synergetic effect of photocatalysis and ozonation, which facilitated the generation of holes on TiO2 and hydroxyl radicals. Moreover, Cu(II)-grafted TiO2 proved to be very stable in the reaction without any deactivation and the Cu ions would not leach from TiO2 to aqueous solution. Therefore, this photocatalytic ozonation system is promising to purify wastewater with refractory pollutants under visible light.
Building heterojunction is promising strategy for the achievement of highly efficient photocatalysis. In this study, a novel SnIn4S8@ZnO Z-scheme heterojunction with tight contact interface was successfully constructed through a facile two-step hydrothermal method. The phase composition, morphology, and photophysical properties of SnIn4S8@ZnO were studied through a series of characterization methods, respectively. Methylene blue (MB) was selected as the target pollutant for photocatalytic degradation and the degradation process was fitted with pseudo-first order kinetics. The as-prepared SnIn4S8@ZnO heterojunctions exhibited outstanding photocatalytic activities for the degradation of MB. The optimized sample (ZS800), in which the molar ratio of ZnO to SnIn4S8 was 800, displayed the highest photodegradation efficiency of MB (91%) within 20 min. Furthermore, the apparent rate constant of photodegradation for MB of ZS800 (0.121 min−1) was 2.2 times higher than that of pure ZnO (0.054 min−1). The improvement of photocatalytic activity could be attributed to the effective spatial separation of photogenerated charge carriers through a Z-scheme heterojunction with intimate contact interface. This work will provide a new insight into constructing excellent ZnO-based photocatalytic systems for wastewater purification.