Two-dimensional materials have gained great attention as a promising thermoelectric (TE) material due to their unique density of state with confined electrons and holes. Here, we synthesized 1T phase tungsten disulfide (WS 2 ) nanosheets with high TE performance via the hydrothermal method. Flexible WS 2 nanosheets restacked thin films were fabricated by employing the vacuum filtration technique. The measured electrical conductivity was 45 S cm −1 with a Seebeck coefficient of +30 μ V K –1 at room temperature, indicating a p-type characteristic. Furthermore, the TE performance could be further improved by thermal annealing treatment. It was found the electrical conductivity could be enhanced 2.7 times without sacrificing the Seebeck coefficient, resulting in the power factor of 9.40 μ W m −1 K −2 . Moreover, such 1T phase WS 2 nanosheets possess high phase stability since the TE properties maintained constant at least half one year in the air atmosphere. Notably, other kinds of 1T phase transitional metal dichalcogenides (TMDCs) with excellent TE performance also could be imitated by using the procedure in this work. Finally, we believe a variety of materials based on 1T phase TMDCs nanosheets have great potential as candidate for future TE applications.
Graphene nanowalls (GNWs) with different sizes (i.e., length and height) were grown directly on the surface of individual carbon fibers (CFs) using a radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) technique. The size was controlled by varying the deposition time. The GNW-modified CFs were embedded into epoxy resin matrix to prepare a series of carbon-fiber-reinforced composites (CFRCs). The results indicated that GNWs were remarkably effective in improving the interfacial shear strength (IFSS) and interlaminar shear strength (ILSS) of the carbon-fiber-reinforced composites. The enhancement effect on the strength strongly depended on the size of GNWs. It increased with the increase in the GNWs’ size and reached the maximum upon the incorporation of GNWs that were grown for 45 min. Noticeable increases of 222.8% and 41.1% were observed in IFSS and ILSS, respectively. The enhancement mechanism was revealed by means of scanning electron microscope (SEM) fractography analysis. However, further increase of GNW size led to no more improvement in the shear strength. It could result from the increased defect concentration and wrinkle size in the GNWs, which deteriorated the strength.
In this paper, we propose a graphene-based radar cross section (RCS) tunable antenna that utilizes metal mesh and graphene, both of which are optically transparent. The graphene sandwich structure is introduced to replace traditional components like diodes, micro-electro-mechanical systems (MEMS), and varactors, acting as an electromagnetic wave controller and significantly simplifying the device's complexity. By applying different voltages, the electrical properties of graphene are altered, enabling the regulation of reflection, transmission, and absorption of electromagnetic waves. This not only modifies the antenna's pattern but also achieves a substantial reduction in out-of-band RCS. The radiation and scattering mechanism of the antenna is carefully elaborated. The numerical and experimental results match well, which validates the effectiveness of the proposed method. The optical transmittance of the device is 27.9% at 550 nm, and the out-of-band RCS reduction is 10.01 dB at 3.83 GHz. The transparent, RCS tunable antenna proposed has significant potential applications in optical and microwave stealth technology.