This paper investigates the influence of anisotropy and destructuration on the behavior of a test embankment on soft clay. The test embankment at Murro, Finland, was commissioned in 1993 by the Finnish Road Administration and has been monitored for over 10 years . The construction and consolidation of Murro test embankment is analyzed with finite element method using three different constitutive models to represent the soft soil. The results are compared with field observations. The constitutive models used include two recently proposed constitutive models, namely S-CLAY1 that accounts for initial and plastic strain induced anisotropy and its extension, called S-CLAY1S. The S-CLAY1S model accounts, additionally, for interparticle bonding and degradation of bonds. For comparison, the test embankment is also analyzed using the isotropic Modified Cam Clay model. The simulations demonstrate that for this type of problem, it is important to account for the anisotropy, whereas destructuration appears to have le...

Cement/lime-based solidification is an environmentally sound solution for the management of dredged marine sediments, instead of traditional solutions such as immersion. Based on the mineralogical composition and physical characteristics of Dunkirk sediments, the effects of cement and lime are assessed through Atterberg limits, modified Proctor compaction, unconfined compressive strength and indirect tensile strength tests. The variation of Atterberg limits and the improvement in strength are discussed at different binder contents. The potential of sediments solidified with cement or lime for road construction is evaluated through a proposed methodology from two aspects: I-CBR value and material classification. The test results show the feasibility of solidified dredged sediments for beneficial use as a material in road construction. Cement is superior to lime in terms of strength improvement, and adding 6% cement is an economic and reasonable method to stabilize fine sediments.