Roman Yakupov

Mr. Roman Yakupov

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2024 in Russian Journal of General Chemistry
Verified
Journal Article
Closed access
PDF file
SISergei Ivanin
Sergei Ivanin
VBV. Yu. Buz’KO
V. Yu. Buz’KO
RYRoman Yakupov
Roman Yakupov
IYI. V. Yablonsky
I. V. Yablonsky
ISIgor Sukhno
Igor Sukhno
Nickel-zinc ferrite fibers Ni0.5Zn0.5Fe2O4 of various morphologies were synthesized. The X-ray phase analysis showed that the samples correspond to the nickel-zinc ferrite phase. Scanning electron microscopy data confirm that the studied samples of Ni0.5Zn0.5Fe2O4 fibers consist of nano-sized particles. The band gaps determined by the optical method for both samples of Ni0.5Zn0.5Fe2O4 fibers were 1.46 and 1.58 eV, which is lower than for Ni0.5Zn0.5Fe2O4 nanopowders. The kinetics of the photocatalytic degradation of methylene blue in the presence of ferrite fibers under artificial illumination was studied. The ferrite fiber sample with pores and the smallest band gap has the greatest photocatalytic activity.

10 April 2023 in Transactions of the Kоla Science Centre of RAS. Series: Engineering Sciences
Verified
Journal Article
Closed access
MPMarina V. Papezhuk
Marina V. Papezhuk
KUKuban State University
Kuban State University
EPElizaveta M. Pilunova
Elizaveta M. Pilunova
SISergei Ivanin
Sergei Ivanin
RYRoman Yakupov
Roman Yakupov
The results of obtaining microcrystalline hydroxyapatite (without additives, with additives of gelatin, EDTA, PVP, PVAL) are presented. It was established by SEM that additives significantly affect the surface morphology of hydroxyapatite particles. The Ca/P ratio in the samples was determined using energy dispersive analysis. Based on synthesized hydroxyapatite, fibers were obtained by electrospinning.

12 July 2024 in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
Verified
Journal Article
Open access
PDF file
RYRoman Yakupov
Roman Yakupov
VBVladimir Yu. Buzko
Vladimir Yu. Buzko
SISergei Ivanin
Sergei Ivanin
MPMarina V. Papezhuk
Marina V. Papezhuk
Composite materials with magnetic fillers play an important role in a number of industries, from functional coatings in electronics to electromagnetic wave absorption and microwave-shielding materials. An important feature is the selection of a magnetic nano-sized filler that does not cause increased degradation of the polymer binder, and the selection of a polymer that ensures the weather resistance of the nanocomposite material. In this study, composite samples of micro- and nanofibers based on fabricated particles of nanosized magnetite (Fe3O4) as a cheap electromagnetic wave absorption material were investigated. Magnetic polymer-dielectric fibers polystyrene-Fe3O4 were obtained by electrospinning. The X-ray diffraction analysis showed that the synthesized Fe3O4 nanoparticles have a cubic space group structure Fd3m with crystal lattice parameter a = 8.422±0.026 Å. The analysis of the ferromagnetic resonance spectrum showed the ferromagnetic nature of the obtained magnetite nanoparticles. It has been shown that during the production of composite fibers by electrospinning, a dispersion of nano-sized magnetite powder can be included in the spinning solution, which, as a result of the electrospinning process, allows obtaining magnetic composite micro- and nanofibers. The average size of the included magnetite particles was15±3 nm. The resulting non-woven magnetic material is predominantly composed of two types of fibers with an average diameter of 680±280 nm and larger associated fibers with a diameter of 1500±300 nm. Based on a certain frequency ependence of losses upon reflection RL in the frequency range 15 MHz – 7.0 GHz, the synthesized fibrous material can be considered to be an effective electromagnetic wave absorption material.

29 May 2026 in Surfaces
Verified
Journal Article
Open access
PDF file
ATAnastasiia Denisovna Tsareva
Anastasiia Denisovna Tsareva
SKSergey Kravchenko
Sergey Kravchenko
VBVadim Yuryevich Baula
Vadim Yuryevich Baula
ISIgor Sukhno
Igor Sukhno
VBVladimir Yu. Buzko
Vladimir Yu. Buzko
Dimitri IvanovDimitri Ivanov
Dimitri Ivanov
Flexible implantable electrodes require biocompatibility, mechanical stability, and sufficient electrical conductivity for effective neural interfacing. This work examines ultrasonic treatment during poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) impregnation of electrospun poly(D,L)-lactide (PLA) nonwoven scaffolds as a route to improve filler distribution and functional performance. Four sample types were studied: pristine PLA (untreated and sonicated) and PLA–PEDOT:PSS composites prepared with and without ultrasonication. Scanning electron microscopy shows that ultrasonic treatment suppresses the formation of continuous surface films and promotes homogeneous three-dimensional penetration of PEDOT:PSS throughout the fibrous network. As a result, electrical resistivity decreases by a factor of 7.3, from 294.4 to 40.2 Ω·m. Contact-angle measurements reveal markedly enhanced wettability, with sonicated composites exhibiting rapid water uptake (5–13 s), unlike non-sonicated controls. These findings demonstrate that ultrasound-assisted PEDOT:PSS impregnation yields conductive, highly wettable, and structurally stable scaffolds, highlighting their potential for flexible implantable neural electrodes.