The mechanical changes in active materials with large volume expansion such as silicon and nickel not only affect the electrochemical performance of modern batteries but also pose a great challenge to their mechanical design due to the pressure increase during operation. In this study, we show that the large expansion and consequently changing mechanical properties of silicon and nickel strongly affect the electrochemical and mechanical performance. A multi-scale electrochemical model is developed, parameterized, and validated for a pouch cell with a SiOx-graphite anode (22 wt% SiOx) and an NMC∣811 cathode. Mechanical parameters such as expansion and compressive properties are determined experimentally using an in-house-developed high-precision cell press and electrode dilatometer, thus parameterizing a semi-empirical mechanical model. We employ a new characterization technique to measure mechanical changes in the cell in-operando and propose a phenomenological parameterization where physical modeling is not yet sufficient. Through electrode porosity, we show that mechanical and electrochemical performance are interdependent, as the latter is reduced upon expansion and pressure development. On the one hand, the active material of the anode seems to expand into the pores at increased pressure, and on the other hand, the mechanical deformation of the cell components can no longer be neglected.
This research paper investigates the influence of varying silicon oxide (SiO) content on the performance and aging of lithium-ion cells. In-depth investigations encompass charge and discharge curves, thickness changes, electrolyte degradation, gas evolution, and chemical analysis of cells with different silicon oxide proportions in the anode and their associated cathodes. The results show that a higher silicon oxide content in the anode increases the voltage hysteresis between charge and discharge. Moreover, the first-cycle efficiencies decrease with a higher silicon oxide content, attributed to irreversible LiSi formation and the subsequent loss of active lithium from the cathode during formation. The anodes experience higher thickness changes with increased silicon oxide content, and peaks in differential voltage curves can be correlated with specific anode active materials and their thickness change. A gas analysis reveals conductive salt and electrolyte intermediates as well as silicon-containing gaseous fragments, indicating continuous electrolyte decomposition and silicon oxide aging, respectively. Additionally, a chemical analysis confirms increased silicon-derived products and electrolyte degradation on electrode surfaces. These findings underscore the importance of a holistic aging investigation and help understand the complex chemical changes in electrode materials for designing efficient and durable lithium-ion cells.
The aging of lithium-ion cells critically affects their lifetime, safety, and performance, particularly due to electrode and electrolyte degradation. This study introduced a novel combined-measurement cell-integrating operando dilatometry and operando mass spectrometry to observe real-time physical and chemical changes during electrochemical cycling. Operando dilatometry measures thickness changes in the working electrode, while operando mass spectrometry analyzes gas emissions to provide insights into the underlying degradation processes. The results indicated significant correlations between electrochemical behavior, thickness changes, and gas evolution, revealing both the reversible and irreversible growth of constituents on particles and the electrode surface. The formation of the solid electrolyte interphase due to the degradation of electrolyte components, such as solvents or conductive salts, is identified as a key factor contributing to irreversible changes. The operando gas analysis highlighted the presence of decomposition intermediates and products, which are all linked to electrolyte degradation. Additionally, post-mortem gas chromatography coupled with mass spectrometry identified several compounds, confirming the presence of different decomposition pathways. This integrated and holistic approach deepened the understanding of the aging mechanisms at the electrode level.
6 August 2026 in Journal of the Electrochemical Society
This research explores the advancement of innovative and highly scalable continuous dry coating processes for next-generation batteries by integrating machine learning (ML)/artificial intelligence (AI) with intelligent quality assurance and process monitoring. The study enhances solvent-free electrode manufacturing processes, specifically extrusion and dry transfer, through AI-based inline process control and a connected database, utilizing the DRYtraec® method. Advanced sensor technology was incorporated into a pilot plant, enabling automated data analysis and AI-supported modeling through digital twins. Machine learning models, particularly deep neural networks (DNNs) and convolutional neural networks (CNNs), were developed to optimize process parameters, leading to improved efficiency and product quality while reducing waste. Virtual sensors predict measurement values and detect anomalies early, ensuring high reliability in process monitoring. An active learning framework continuously refines AI models by integrating new production data, while Bayesian optimization (BO) identifies optimal process parameters. The integration of digital twins (DTs) facilitates real-time predictions, enhancing adaptability to evolving conditions. This study highlights the transformative potential of AI/ML in revolutionizing electrode manufacturing, contributing to the development of high-quality battery cells. The implemented methods are independent of the active material used, thereby enabling the production of green, sustainable cells.