Self‐healing concrete, with its ability to autonomously repair damages, holds promise in enhancing its structural durability and resilience. Research on self‐healing concrete in the past decade has advanced in understanding the mechanisms behind healing, exploring various healing agents, and assessing their effectiveness in concrete structures. However, the full potential of self‐healing concrete remains untapped unless its effects are effectively integrated into the design practices of reinforced concrete structures. Realizing this challenge, this paper synthesizes the current research progress and discusses the possibilities to consider self‐healing into design codes. The focus was placed on two specific benefits of applying self‐healing concrete: one centered on durability and the other on mechanical performance. Specifically, the effect of self‐healing on impeding chloride penetration into cracked reinforced concrete was discussed first. Modifications of parameters in existing predictive models based on different types of healing approaches were recommended. Furthermore, the possible impact of the self‐healing capacity in mitigating the stiffness reduction of concrete was also discussed. Equations that can describe the stiffness regained due to healing action are presented. In each part of the case study, limitations and challenges still hindering standardization and wider application in the construction field are discussed.
Cracks in reinforced concrete structures can accelerate the local depassivation of reinforcement due to carbonation. Different approaches have been proposed to account for pre-existing cracks within engineering models to predict the carbonation depth. In this study, we provide a detailed comparative analysis of different extensions available for the fib carbonation model to account for cracks, viz., crack influence factor (CIF) approaches, a diffusion-based model and the crack depth adaption. The model extensions are first validated against a dataset of lab data collected from the literature and additional experiments performed as the part of this study. The CIF approaches achieved the highest accuracy for the carbonation depth prediction when compared against lab data. The diffusion-based model was inaccurate for low concentrations. The crack depth adaption provides overly conservative results. No model was found to be best performing, and large scatter was observed between predicted and experimental values. This emphasizes the need for more detailed multi-physics-based models to achieve accurate predictions. For further comparison, service life predictions were conducted for two structural scales, viz., the whole structure and the cracked area. It is concluded that the choice of model extension and the structural scale of analysis have a large influence on predicted probability of failure.