Self-healing hydrogel products have attracted a great deal of interest in wound healing due to their ability to repair their own structural damage. Herein, an all-natural self-healing hydrogel based on methacrylated chitosan (CSMA) and dialdehyde bacterial cellulose (DABC) is developed. MA is used to modify CS and obtain water-soluble biomaterial-based CSMA with photo crosslinking effects. BC is modified through a simple oxidation method to gain dialdehyde on the polymer chain. The success of the modification is confirmed via FTIR. Hydrogels are formed within 11 min through the establishment of a Schiff base between the amino of CSMA and the aldehyde of DABC. A dynamically reversible Schiff base bond endows hydrogel with good self-healing properties through macroscopic and microscopic observations. We observe the uniform and porous structure in the hydrogel using SEM images, and DABC nanofibers are found to be well distributed in the hydrogel. The compressive strength of the hydrogel is more than 20 kPa and the swelling rate sees over a 10-fold increase. In addition, the CSMA/DABC hydrogel has good cytocompatibility, with cell viability exceeding 90%. These results indicate that the all-natural self-healable CSMA/DABC hydrogel demonstrates strong application potential in wound healing and tissue repair.
In recent years, flexible pressure sensors have received considerable attention for their potential applications in health monitoring and human–machine interfaces. However, the development of flexible pressure sensors with excellent sensitivity performance and a variety of advantageous characteristics remains a significant challenge. In this paper, a high-performance flexible piezoresistive pressure sensor, BC/ZnO, is developed with a sensitive element consisting of bacterial cellulose (BC) nanofibrous aerogel modified by ZnO nanorods. The BC/ZnO pressure sensor exhibits excellent mechanical and hydrophobic properties, as well as a high sensitivity of −15.93 kPa−1 and a wide range of detection pressure (0.3–20 kPa), fast response (300 ms), and good cyclic durability (>1000). Furthermore, the sensor exhibits excellent sensing performance in real-time monitoring of a wide range of human behaviors, including mass movements and subtle physiological signals.
Acoustic emission (AE) technology has been widely utilized to monitor the SiC wafer lapping process. The root-mean-square (RMS) of the time–domain eigenvalues of the AE signal has a linear relationship with the material removal rate (MRR). However, the existence of background noise severely reduces signal monitoring accuracy. Noise interference often leads to increased RMS deviation and signal distortion. In the study presented in this manuscript, a frequency threshold noise reduction approach was developed by combining and improving wavelet packet noise reduction and spectral subtraction noise reduction techniques. Three groups of SiC lapping experiments were conducted on a fixed abrasive pad, and the lapping acoustic signals were processed using three different noise reduction approaches: frequency threshold, wavelet packet, and spectral subtraction. The results show that the noise reduction method using the frequency threshold is the most effective, with the best coefficient of determination (R2) for the linear fit of the RMS to the MRR.
14 November 2024 in International Journal of Biological Macromolecules